Manual de instrucciones de Airlink101 AWLC6045

Resumen del contenido incluido en la página 1

Rev. 1.0 Step 1 Insert the Installation CD into your CD drive and select Install Driver and
Utility from the menu.

Quick Installation Guide
300N Draft 802.11n Wireless Cardbus Adapter
Model # AWLC6045
Package Content:
• Cardbus Adapter
Note: If the Autorun screen doesn’t appear automatically go to Start, Run, and
• Installation CD
type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK.
• Quick Installation Guide
Step 2 Click Next at the welcome screen.
Section 1
Instal

Resumen del contenido incluido en la página 2

Step 4 Click Continue Anyway at the Windows Logo Screen. Step 8 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). (For Windows 2000, click Yes at the Digital Signature Not Found prompt). Step 5 Verify Yes, I want to restart my computer now is selected and click Finish to restart your computer. Step 6 After your computer is restarted, insert the Cardbus Adapter. Step 9 Click Finish. (Restart the computer for Windows 98SE and

Resumen del contenido incluido en la página 3

Step 2 If encryption is not enabled for the selected access point / router, skip to Section 3 Section 2 step 6. Otherwise, enter a Profile Name for your wireless setting and click Next. Configure the Cardbus Adapter To open the utility, go to Start > (All) Programs > AirLink101 300N Wireless Cardbus Adapter > AirLink101 300N Wireless Cardbus Adapter. Step 1 Go to the AP List tab, select the SSID (Network Name) of the wireless Step 3 Verify that the Network Name matches the SSID of your wireless

Resumen del contenido incluido en la página 4

Step 4 The utility will detect the encryption settings of your wireless router or Step 7 Go to the Link Information tab and click on the More button. access point and show it in the boxes below automatically. If you do not have any encryption settings, you will not see this window. After selecting the proper encryption settings from the drop-down menu, click Next. Step 8 Verify that you are receiving adequate Signal Strength and Link Quality and that you have been assigned a valid IP address (in