Resumen del contenido incluido en la página 1
OWNER’S MANUAL
Network
Blu-ray Disc™ / DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP200
P/NO : MFL67475811_1.0
www.lg.com
Resumen del contenido incluido en la página 2
Getting Started 2 Getting Started Safety information CAUTION Use of controls, adjustments or the performance of 1 RISK OF ELECTRIC SHOCK procedures other than those specified herein may DO NOT OPEN result in hazardous radiation exposure. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO CAUTION concerning the Power Cord USER-SERVICEABLE PARTS INSIDE REFER SERVICING Most appliances recommend they be placed upon TO QUALIFIED SERVICE PERSONNEL. a dedicated circui
Resumen del contenido incluido en la página 3
Getting Started Getting Started 3 This device is equipped with a portable battery or Connect the equipment into an outlet on a y accumulator. circuit different from that to which the receiver is connected. Safety way to remove the battery or the battery from the equipment: Remove the y Consult the dealer or an experienced radio/TV old battery or battery pack, follow the steps technician for help. 1 in reverse order than the assembly. To prevent CAUTION: Any changes or modifications not co
Resumen del contenido incluido en la página 4
Getting Started 4 Getting Started Notes on Copyrights y Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of 1 CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected content. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or chang
Resumen del contenido incluido en la página 5
Getting Started Getting Started 5 14. Refer all servicing to qualified service personnel. IMPORTANT SAFETY Servicing is required when the apparatus has been damaged in any way, such as power- INSTRUCTIONS supply cord or plug is damaged, liquid has been 1. Read these instructions. spilled or objects have fallen into the apparatus, 1 the apparatus has been exposed to rain or 2. Keep these instructions. moisture, does not operate normally, or has 3. Heed all warnings. been dropped. 4. Foll
Resumen del contenido incluido en la página 6
6 Table of Contents 3 System Setting Table of Contents 26 Settings 26 – Initial setup 27 – Adjust the setup settings 1 Getting Started 27 – [DISPLAY] menu 29 – [LANGUAGE] menu 2 Safety information 29 – [AUDIO] menu 8 Introduction 31 – [LOCK] menu 8 – Playable discs and symbols used in 32 – [NETWORK] menu this manual 33 – [OTHERS] menu 9 – About the “7” symbol display 9 – Compatibility notes 10 – File requirement 4 Operating 11 – AVCHD (Advanced Video Codec High 34 General playback Definition
Resumen del contenido incluido en la página 7
Table of Contents 7 5 Troubleshooting 46 Troubleshooting 46 – General 47 – Network 1 48 – Picture 48 – Customer support 48 – Open source software notice 2 6 Appendix 49 Controlling a TV with the supplied remote control 49 – Setting up the remote to control your 3 TV 50 Network software update 50 – Network update notification 50 – Software update 52 Area code list 4 53 Language code list 54 Trademarks and licenses 56 Audio output specifications 58 Specifications 59 Maintenance 5 59 – Handling
Resumen del contenido incluido en la página 8
Getting Started 8 Getting Started Introduction 1 Playable discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. e y BD-R/RE discs that are recorded in BDAV format. Blu-ray y BD-R/RE discs that contain Video, Audio or y Photo files. u y ISO 9660+JOLIET, UDF and UDF Bridge format i y Discs such as movies that can be purchased or rented. r Video mode and finalized only y DVD-ROM y Supports the dual layer disc also DVD
Resumen del contenido incluido en la página 9
Getting Started Getting Started 9 Note , About the “7” symbol display y Depending on the conditions of the “7” may appear on your TV display during recording equipment or the CD-R/RW (or operation and indicates that the function explained DVD±R/RW) disc itself, some CD-R/RW (or in this owner’s manual is not available on that DVD±R/RW) discs cannot be played on the 1 specific media. unit. Depending on the recording software & the y finalization, some recorded discs (CD-R/RW, Compatibili
Resumen del contenido incluido en la página 10
Getting Started 10 Getting Started File requirement Video files 1 File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.mpg”, XVID, MPEG1 SS, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpeg”, “.mkv”, H.264/MPEG-4 AVC, DTS, MP3, SubStation Alpha (.ssa/.txt), Disc, “.mp4”, “.asf ”, MPEG2 PS, MPEG2 TS, WMA, AAC, MicroDVD (.sub/.txt), VobSub USB “.m4v” (DRM VC-1 SM (WMV3) AC3 (.sub), SubViewer 1.0 (.sub), free), “.vob”, SubViewer 2.0 (.sub/.txt), TMPlayer “.3gp”,
Resumen del contenido incluido en la página 11
Getting Started Getting Started 11 Note Note , , y The file name is limited to 180 characters. y A “avi” file which is encoded “WMV 9 codec” is not supported. y Maximum files/Folder: Less than 2000 (total number of files and folders) y This player supports UTF-8 files even it 1 contains Unicode subtitle content. This y Depending on the size and number of the player can not support the pure Unicode files, it may take several minutes to read the subtitle files. content on the media. Depe
Resumen del contenido incluido en la página 12
Getting Started 12 Getting Started Certain system requirements Regional code For high definition video playback: This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD High definition display that has HDMI input jack. y discs labeled same as the rear of the unit or “ALL”. 1 y BD-ROM disc with high definition content. y HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors). For Dolby® Di
Resumen del contenido incluido en la página 13
Getting Started Getting Started 13 Remote control • • • • • • a • • • • • • • • • • • • d • • • • • 1 (POWER): Switches the player REPEAT (h): Repeats a desired 1 ON or OFF. section or sequence. B (OPEN/CLOSE): Opens and AUDIO ([): Selects an audio closes the disc tray. language. 0-9 numerical buttons: Selects SUBTITLE (]): Selects a subtitle numbered options in a menu. language. CLEAR: Removes a number when TITLE/POP-UP: Displays the DVD setting the password. title menu or BD-RO
Resumen del contenido incluido en la página 14
Getting Started 14 Getting Started Front panel 1 a Disc Tray d B (OPEN / CLOSE) b Display Window e 1 (POWER) Remote Sensor USB Port c f Rear panel DC IN 12V (AC adapter input) HDMI OUT a c b LAN port d DIGITAL AUDIO OUT (COAXIAL)
Resumen del contenido incluido en la página 15
Connecting Connecting 15 Connecting the AC Connecting to your TV adapter If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Connect the unit to the power supply with the Speed HDMI™ Cable). Connect the HDMI jack on supplied AC adapter. the player to the HDMI jack on a HDMI compatible TV or monitor. Rear of the unit Rear of the unit 2 HDMI cable TV Plug into a power source. y Contact an electrical parts distributor for assistance in selec
Resumen del contenido incluido en la página 16
Connecting 16 Connecting Note Additional information for HDMI , If a connected HDMI device does not accept y y When you connect a HDMI or DVI compatible the audio output of the player, the HDMI device make sure of the following: device’s audio sound may be distorted or may not output. - Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI y When you use HDMI connection, you can device and leave it for around 30 seconds, change the resolution for the HDMI ou
Resumen del contenido incluido en la página 17
Connecting Connecting 17 Note , Resolution setting y If your TV does not accept the resolution The player provides several output resolutions for you have set on the player, you can set HDMI OUT jack. You can change the resolution resolution to 480p as follows: using [Setup] menu. 1. Press B to open the disc tray. 1. Press HOME ( ). n 2 Press Z (STOP) for more than 5 seconds. 2. Use a/d to select the [Setup] and press ENTER When you set the resolution to 480i with y ( ). The [Setup] menu
Resumen del contenido incluido en la página 18
Connecting 18 Connecting Connecting to an amplifier via Connecting to an HDMI output amplifier Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a Make one of the following connections, depending HDMI cable. on the capabilities of your existing equipment. y HDMI audio connection (page 18) Rear of the unit Digital audio connection (page 19) y Since many factors affect the type of audio output, 2 see “Audio output specifications” for details (pages 5
Resumen del contenido incluido en la página 19
Connecting Connecting 19 Connecting to an amplifier via Connecting to your digital audio output home network Connect the player’s COAXIAL OUT jack to the corresponding in jack on your amplifier using an This player can be connected to a local area optional digital audio cable. network (LAN) via the LAN port on the rear panel or the internal wireless module. Rear of the unit By connecting the unit to a broadband home network, you have access to services such as 2 software updates, BD-L
Resumen del contenido incluido en la página 20
Connecting 20 Connecting 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). Broadband service 2 2. Read the preparations for the network settings Router and then press ENTER (b) while [Start] is highlighted. Network will automatically be connected to the unit. Rear of the unit Wired network setup Advanced Setting If there is a DHCP server on the local area network (LAN) via wired connection, this player will If you want to set the network settings manually,
