Resumen del contenido incluido en la página 1
Megabit Modem
Megabit Modem
Megabit Modem 410F and
420F User Manual
Version 3.1.x
Catalog Number
MMD4080I1 Issue 1
Resumen del contenido incluido en la página 2
Copyright January 2001 ©Copyright 2001 ADC DSL Systems, Inc. All Rights Reserved. Trademark Information ADC is a registered trademark of ADC Telecommunications, Inc. Megabit Modem is a registered trademark of PairGain Technologies, Inc. All Rights Reserved. No right, license, or interest to such trademarks is granted hereunder, and you agree that no such right, license, or interest shall be asserted by you with respect to such trademark. Other product names mentioned in this practice are used fo
Resumen del contenido incluido en la página 3
About this User Manual ABOUT THIS USER MANUAL Use this manual to install and configure the Megabit Modem 410F and 420F. This manual provides instructions on: • information you will need to configure the modems unpacking and inspecting the modems for installation installing the modems setting up parameters for your applications that will be used to configure the modems configuring system parameters configuring the connection between the Megabit Modem 410F and 420F monitoring and troub
Resumen del contenido incluido en la página 4
Product Certifications PRODUCT CERTIFICATIONS FCC Megabit Modem 410 and 420F This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
Resumen del contenido incluido en la página 5
Table of Contents TABLE OF CONTENTS Chapter 1: About the Product ________________________________________________1 Features................................................................................................................................2 Applications.........................................................................................................................3 Chapter 2: What You Need to Start ___________________________________________5 Verify Package Contents .........
Resumen del contenido incluido en la página 6
Table of Contents Accessing the Modem Web Pages.....................................................................................34 Viewing Model and Software Versions.............................................................................35 Saving the Configuration and Effecting Changes..............................................................36 Saving the Configuration to NVRAM.................................................................37 Resetting the Modem...................
Resumen del contenido incluido en la página 7
Table of Contents Bridging and Routing ........................................................................................................69 Bridging...............................................................................................................69 MAC Layer Bridging............................................................................69 Spanning Tree Protocol ........................................................................69 Routing..............................
Resumen del contenido incluido en la página 8
Table of Contents Limited Warranty...............................................................................................................82 Advance Replacement .......................................................................................................83 Billing ................................................................................................................................83 Returning a Product ...................................................................
Resumen del contenido incluido en la página 9
MEGABITMODEM 420F LAN ADSL PWR LINK TX RX COL SYNC TX RX MAR ABOUT THE PRODUCT 1 ® The Megabit Modem 410F and 420F use Asymmetric Digital Subscriber Line (ADSL) technology and Discrete MultiTone (DMT) line coding to provide a multi-megabit connection between the two modems using a single-pair telephone line. The Megabit Modem 410F and 420F are designed to be used together, one at each end of a circuit, with model 410F functioning as the ATU-C and model 420F functioning as the ATU-R. The Megabit
Resumen del contenido incluido en la página 10
Features FEATURES The Megabit Modem 410F and 420F provide: fixed-rate or rate-adaptable ADSL transmission downstream at up to 7.552 Mbps and upstream at up to 928 kbps Dynamic Host Configuration Protocol (DHCP) server to provide network configuration information including IP addresses to LAN devices Trivial File Transfer Protocol (TFTP) for software upgrades AccessGain™ software that provides access through an HTTP server to configure, manage, and monitor the modem through a Web-based in
Resumen del contenido incluido en la página 11
Chapter 1: About the Product APPLICATIONS Use the Megabit Modem 410F and 420F for: remote access to private networks, for example, telecommuting point-to-point LAN extension, for example, connecting a remote network to a central site Telecommuting Application Corporate office Service Provider Home office Local User 420F 420F 410F 410F Modem Router Modem Modem Modem Ethernet LAN ADSL ADSL LAN Extension Application Central site Remote network Ethernet LAN 420F 410F Modem Modem Ethernet LAN ADS
Resumen del contenido incluido en la página 12
Applications 4 Megabit Modem 410F and 420F User Manual
Resumen del contenido incluido en la página 13
MEGABITMODEM 420F LINK LAN TX RX ADSL PWR COL SYNC TX RX MAR WHAT YOU NEED TO START 2 This chapter identifies the preparations and prerequisites for installing the Megabit Modem 410F and 420F. Install the Megabit Modem 410F (ATU-C) at one end of the circuit and a Megabit Modem 420F (ATU-R) at the other end. To install each modem, verify that: the contents of the package are accurate as described on this page your system meets requirements for connecting to and configuring the modem (see “Req
Resumen del contenido incluido en la página 14
Requirements for your System If you need to store the modem for a prolonged period, store it in the original antistatic bag and packaging. Observe environmental specifications as stated on page 76. REQUIREMENTS FOR YOUR SYSTEM You need the following hardware and software to complete the installation and configuration of the Megabit Modem 410F or 420F: PC with an Ethernet Network Interface Card (NIC) TCP/IP network protocol stack (see the documentation for your operating system) ® ® Web bro
Resumen del contenido incluido en la página 15
MEGABITMODEM 420F MEGABITMODEM 420F MEGABITMODEM 420F LAN ADSL LAN ADSL LAN ADSL PWR LINK TX RX COL SYNC TX RX MAR PWR LINK TX RX COL SYNC TX RX MAR PWR LINK TX RX COL SYNC TX RX MAR Chapter 2: What You Need to Start Flat-Surface Mount Do not stack the modems when installing on a flat surface. The modems do not dissipate heat properly when stacked. Place the modems on a flat surface, such as on a table or in a rack. Minimum 1-inch clearance Minimum 1-inch clearance Megabit Modem 410F and 420F Us
Resumen del contenido incluido en la página 16
Requirements for the Installation Site Wall Mount Ensure the minimum dimensions (shown in the illustration) for spacing between the modems are met to allow for heat dissipation, viewing of front panel LEDs, and cabling. Mount the modems on a wall using the hardware included in the installation kit. Observe the minimum dimensions between multiple modems (shown in the illustration) to ensure sufficient ventilation for heat dissipation. 3" to 4" 4.85" 12" Min. 3" 4.85" 8 Megabit Modem 410F and 420F
Resumen del contenido incluido en la página 17
Chapter 2: What You Need to Start POWER CABLE OPTIONS The Megabit Modem 410F and 420F are available with a variety of power supplies and power cords. The product part numbers are as follows: Megabit Modem 410F is 150-2129-7x Megabit Modem 420F is 150-2128-7x When you order your modems, choose one of the following as the last number of the product part number for your order to indicate which power cable option you need: 2 indicates a power supply for International use and does not include a pow
Resumen del contenido incluido en la página 18
Power Cable Options 10 Megabit Modem 410F and 420F User Manual
Resumen del contenido incluido en la página 19
INSTALLING THE MEGABIT MODEM 410F AND 420F 3 The Megabit Modem 410F and 420F are easy to install by: attaching adhesive-backed feet setting the MDI/MDI-X switch connecting a cable from the modem to a PC or an Ethernet hub for LAN service connecting a phone cord from the modem to a wall phone jack for DMT ADSL Internet or other types of WAN services connecting a power cable to a local power outlet powering up and checking LEDs Perform the installation described on the following pages
Resumen del contenido incluido en la página 20
Attaching the Feet ATTACHING THE FEET Attach each of the four adhesive-backed rubber feet to a footprint recess on the bottom of the modem. Rubber feet Recess 12 Megabit Modem 410F and 420F User Manual MEGABITMODEM 420F LAN ADSL PWR LINK TX RX COL SYNC TX RX MAR
