Resumen del contenido incluido en la página 1
External
Fax Modem 56K
User Guide
M73-APO02-210
Resumen del contenido incluido en la página 2
HARDWARE INSTALLATION To install the External Fax Modem 56K card perform the following steps: 1. Turn off your computer. Make sure the power switch of your External Fax Modem 56K is also set to off. 2. Connect the RS-232 cable to your External Fax Modem 56K with one end to the RS-232 port on the rear panel of the External Fax Modem 56K and the other end to the COM port of your computer. 3. Connect the provided power adapter to the AC IN port and the other end into a wall outle
Resumen del contenido incluido en la página 3
5. Connect the telephone line to the RJ-11 Line port, connect the other end of the line into a telephone jack in your wall. Note: Use only the power adapter provided with this unit. Using any incorrect power adapters will cause permanent and unpredictable damage to this External Fax Modem 56K. - 2 -
Resumen del contenido incluido en la página 4
SOFTWARE INSTALLATION Windows 95/98 1. Be sure the External Fax Modem 56K is well connected to your computer. Turn on your computer and start Windows. 2. Windows will automatically detect the new hardware device. Click Next to continue. 3. Load the External Fax Modem 56K floppy disk or compact disc into your computer. When Windows prompts you What do you want Windows to do? Select Search for the best driver for your device. (Recommended). Click Next. 4. Follow the on-screen
Resumen del contenido incluido en la página 5
3. Modem icon should be found if Windows 2000 detects the modem. If not, go to Start Settings Control Panel Phone and Modem Options. 4. Click the Modem tab and press the Add button to add it in. 5. Click Next to set up the modem. 6. Click Finish. 7. Go back to your desktop, and click Start Settings Control Panel System Hardware Device Manager. 8. Click Modems to expand. Right- click Lucent Venus Modem PnP and select Properties. - 4 -
Resumen del contenido incluido en la página 6
9. Click the Driver tab and press the Update Driver button. 10.When the Upgrade Device Driver Wizard window appears, click Next. - 5 -
Resumen del contenido incluido en la página 7
11.Select Display a list of the known drivers for this device so that I can choose a specific driver and click Next. 12.Highlight Lucent Venus Modem PnP and click the Have Disk button. 13.Load the floppy disk or compact disc whichever contains the device driver and type the drive path. Click OK. - 6 -
Resumen del contenido incluido en la página 8
14.Click Next. 15.Click Next. 16.Click Yes. - 7 -
Resumen del contenido incluido en la página 9
17.Click Finish. 18.When back to the External Fax Modem 56K Properties window, click Close to complete the driver updating. 19.To verify if the device is well installed in your system and enabled, go to the Device Manager window. The External Fax Modem 56K should be found on the list. If not, contact your dealer for technical support. - 8 -
Resumen del contenido incluido en la página 10
Installation for Windows Millennium 1. Be sure the External Fax Modem 56K is well connected to your computer. Turn on your system and start Windows Millennium. 2. Go to Start Settings Control Panel System Device Manager. 3. Modem icon should be found if Windows Millennium detects the modem. If not, go to Start Settings Control Panel Modems. 4. Click the General tab and press the Add button to add it in. - 9 -
Resumen del contenido incluido en la página 11
5. Click Next to set up the modem. 6. Click Finish. 7. Go back to your desktop, and click Start Settings Control Panel System Device Manager. 8. Click Modem to expand. Highlight Lucent Venus Modem PnP and select Properties. - 10 -
Resumen del contenido incluido en la página 12
9. Click the Driver tab and press the Update Driver button. 10. Select Specify the location of the driver (Advanced) and click Next. - 11 -
Resumen del contenido incluido en la página 13
11. Select Display a list of all the drivers in a specific location, so you can select the driver you want and click Next. 12. Highlight Lucent Venus Modem PnP [6-8-2000] and press the Have Disk button. - 12 -
Resumen del contenido incluido en la página 14
13. Load the floppy disk or compact disc whichever contains the device driver and type the drive path. Click OK. 14. Click Next. 15. Click Next. - 13 -
Resumen del contenido incluido en la página 15
16. Click Finish. 17. When back to the External Fax Modem 56K Properties window, click Close to complete the driver updating. 18. To verify if the device is well installed in your system and enabled, go to the Device Manager window. The External Fax Modem 56K should be found on the list. If not, contact your dealer for technical support. - 14 -
Resumen del contenido incluido en la página 16
Windows NT 1. Go to My Computer Control Panel. Double-click Modem. Click the Add… button. Click Next. 2. Follow the on-screen instruction to proceed. When the following dialog box appears, select Change... - 15 -
Resumen del contenido incluido en la página 17
3. Select Have Disk…from the ‘‘Install New Modem’’ window. And make sure the External Fax Modem 56K floppy disk or Compact Disc is loaded into your computer. 4. Direct to your floppy disk drive or CD-ROM drive and select EXTERNAL.INF . Follow the on- screen instruction to proceed. - 16 -
Resumen del contenido incluido en la página 18
5. Press Next to continue. 6. Click Finish to complete the installation. - 17 -