Resumen del contenido incluido en la página 1
3-620-271-11 (1)
Network Player
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
NSP-100 (Update:April,24)
© 2002 Sony Corporation
Resumen del contenido incluido en la página 2
WARNING: THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES. WARNING 1. Use the approved Power Cord (3-core mains lead)/ Appliance Connector/Plug with earthing-contacts that To prevent fire or shock hazard, do not conforms to the safety regulations of each country if expose the unit to rain or moisture. applicable. 2. Use the Power Cord (3-core mains lead)/Appliance To avoid electrical shock, do not open the Connector/Plug conforming to the proper ratings cabinet. Refer servicing to qualified
Resumen del contenido incluido en la página 3
Connecting the Power ..........................................24 Examples of System Connection .........................25 Table of Contents Appendix Overview Precautions ...........................................................28 High Image Quality ............................................ 4 Specifications ........................................................28 Superimposed Movies, Stills, and Text .............. 4 Large Capacity ................................................... 4 Wi
Resumen del contenido incluido en la página 4
Overview 2) In the remainder of this manual, these two software versions are referred to together, as the BZNP-100 Software. Overview The NSP-100 Network Player plays back (decodes) Simple Operation From Remote video/audio data in MPEG format, outputting an analog Controller signal. It is the ideal digital content player for advertizing, presentations, training, and other situations. Operation is simple, using the supplied RM-NSP1 The following are the principal features of this system. Re
Resumen del contenido incluido en la página 5
Overview Names and Functions of Parts Main Unit Front Panel and Left Side DC IN 12V 5 Remote control 6 DC IN 12V connector optical receiver 4 ALARM indicator 3 ACCESS indicator 2 NEW CONTENTS indicator 1 POWER indicator 1 POWER indicator 6 DC IN 12V connector This lights when power is supplied to the unit. Connect the DC cable of the supplied AC adapter. 2 NEW CONTENTS indicator This indicator is off, lit, or flashing, to indicate the status of new content delivery. Flashing: new data is bein
Resumen del contenido incluido en la página 6
Overview Main Unit Rear Panel 1 S-OUT connector 2 COMOPOSITE connector 3 G/Y, R/R −Y, B/B −Y connector 4 AUDIO OUT 1 and 2 connectors VIDEO OUT AUDIO OUT G/Y VIDEO IRD REMOTE 1 1 NTSC COMPONENT ON 1 COMPOSITE 2 PAL RGB OFF 2 S-OUT RS-232C/GPI S400 2 1 2 R/ B/ R-Y B-Y 8 DIP switches 7 S400 connector 6 RS-232C/GPI connector 5 Network connector 1 S-OUT (S-video output) connector (mini-DIN 4- Connect to the D-sub 9-pin connector of a plasma pin) display or video monitor. This outputs the playback
Resumen del contenido incluido en la página 7
Overview IRD REMOTE (remote controller settings) Remote Controller ON/OFF (third switch from left): Enable (ON) or disable (OFF) the remote controller. Note 1/2 (rightmost switch): When using two NSP-100 units, to select the unit that responds to the remote Using the remote controller to control the NSP-100 controller, set different remote controller codes for requires settings of both the NSP-100 rear panel DIP them. switches and the remote controller. For details, see “Preparations” (pag
Resumen del contenido incluido en la página 8
Overview While the menu is displayed: Pressing this button 9 PAUSE button confirms the selection of the item shown shown in Press this button during playback, to pause playback. reverse video, and changes the menu display. Press once more to resume playback. b, B, v and V buttons q;PLAY button These function as follows. In normal operation: Pressing this button in the initial screen plays the specified playlist ( PLAY button Button While a list In the menu In screen “One Touch” playback). a
Resumen del contenido incluido en la página 9
Operation Main Unit DIP Switch and Remote Operation Controller Settings To operate the NSP-100 with the remote controller, in the DIP switches on the rear panel of the main unit, set the third switch from the left to the 1 position (ON). Preparations Then set the remote controller to correspond with the code number setting of the rightmost switch as follows. This section describes the preparations for operating the When the code number is 1 (the switch is in the “1” NSP-100 with the suppl
Resumen del contenido incluido en la página 10
Operation 3 With the b and B buttons, select whether or not to use a network, then press the ENTER button. Starting Up and Initial If you select “No,” the screen changes as follows. Settings When you connect a monitor to the unit, and power on for the first time, the starting screen appears and it is then followed by the initial setting screen. In this case, skip to step 9. To return to the previous screen To return to the previous screen instead of advancing to step 9, press the b button
Resumen del contenido incluido en la página 11
Operation 9 When all of the required items have been set, press the MENU button. Displaying the “MENU” To enable the new network settings, a message Screen prompt appears, asking if you want to reset the unit. In the initial screen, press the MENU button. The “MENU” screen appears. 10 Select “Yes” to reset immediately or “No” to reset later, then press the ENTER button. In the “MENU” screen, you can select the next screen to be displayed. The screens to be displayed are shown in The initi
Resumen del contenido incluido en la página 12
Operation 2 Using the v and V buttons, select the playlist you want to play. Playing a Playlist 3 Press the ENTER button or PLAY button. In the “Playlist” screen, you can select a desired playlist, and play it. This starts playback of the desired playlist. You can also make the following specifications. When playback ends, the “Playlist” screen Automatic playback at power on reappears. Playlist that starts playback automatically when the unit is powered on To stop during playback PLAY bu
Resumen del contenido incluido en la página 13
Operation Playing a Movie File Displaying a Still Image In the “Video” (file list) screen, you can select a desired File movie file, and play it back. In the “Graphic” (file list) screen, you can select a Use the following procedure. desired still image file, and display it. Use the following procedure. 1 In the “MENU” screen, carry out any of the following. 1 In the “MENU” screen, carry out any of the following. Press numeric button 2. Using the v and V buttons, select “2. Press num
Resumen del contenido incluido en la página 14
Operation The “Delete Files” screen appears. Deleting Unwanted Playlists and Files You can delete unwanted playlists and movie and still image files. Deleting an Unwanted Playlist Use the following procedure. 1 In the “MENU” screen, carry out any of the 2 Carry out any of the following. following. Press numeric button 1, then press the ENTER button. Using the v and V buttons, select “1. Playlist,” and press the ENTER button. The “Delete Playlist” screen appears. Press numeric button 4
Resumen del contenido incluido en la página 15
Operation 5 Using the b and B buttons, select “Yes” or “No,” To change the page and press the ENTER button. When the “Delete Video” screen or “Delete “Yes”: the playlist selected in step 3 is deleted. Graphic” screen is divided into a number of pages, “No”: the playlist is not deleted, and the screen to change the page, press the b or B button. before executing step 4 rea ppears. 3 Using the b and B buttons, select the movie or still image file to be deleted. Deleting Unwanted Movie and S
Resumen del contenido incluido en la página 16
Operation Settings that Function of setting See page Setting the Operating can be selected Configuration (Setup) “1. System Set the system date and time. 16 Time” To make settings relating to the operating configuration, “2. Delete Select whether or not to display 17 display the “Setup” screen. Confirmation” a confirmation message when deleting a playlist, file, event, or similar. Displaying the “Setup” Screen “3. Stop Events Select whether to display the 17 Display” last still image or a b
Resumen del contenido incluido en la página 17
Operation 3 With the numeric buttons, enter the required setting 1 In the “Setup” screen, carry out any of the value. following. Alternatively, use the v and V buttons to adjust the Press numeric button 3, then press the ENTER value. button. Using the v and V buttons, select “3. Stop Events 4 When the setting is complete, press the ENTER Display,” and press the ENTER button. button. The setting can now be changed. This completes the setting. Making the “Delete Confirmation” Setting To sel
Resumen del contenido incluido en la página 18
Operation 2 Using the b and B buttons, select “Yes” or “No.” The Playlist Mode Setup window appears. “Yes”: Save a playback log. “No”: Do not save a playback log. 3 Press the ENTER button. This confirms the setting. Carrying out “Playlist Mode Setup” You can make the following settings for the selected playlist. Automatic playback at power on 3 Using the v and V buttons, select “Power On” or A playlist that begins to play automatically when this “One Touch.” unit is powered on “Power
Resumen del contenido incluido en la página 19
Operation Normally, it is recommended to select “Position Adjustment” first, and position the top left corner of System Administrator the screen, then proceed to size adjustment. Setup 3 Adjust the screen position or size. If you have selected “Position,” using the v, V, b To carry out system administrator setup, display the and B buttons, adjust the position of the screen “System Administrator Setup” screen. horizontally and vertically. The coordinates are shown in parenthesis. If yo
Resumen del contenido incluido en la página 20
Operation Settings selected in the “System Administrator 2 Carry out steps 4 to 8 of the procedure in “Starting Setup” screen Up and Initial Settings” (page 10). The settings selected in the “System Administrator Setup” screen are as follows. For details, see the 3 Carry out any of the following. respective pages. To exit the menu display, press the MENU button. To return to the “System Administrator Setup” Settings that Function of setting See page screen, press numeric button 1, or usin
