Manual de instrucciones de Motorola VIP1003

Resumen del contenido incluido en la página 1

InstallatIon Manual
VIP 1003

Resumen del contenido incluido en la página 2

WaRnInG Caring for the Environment by Recycling When you see this symbol on a Motorola product, do not dispose of the product with TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS residential or commercial waste. APPLIANCE TO RAIN OR MOISTURE. Recycling your Motorola Equipment IMPORTANT SAFETY INSTRUCTIONS Please do not dispose of this product with your residential or commercial waste. Some • • Read these instructions. Use only at tachments and accessories specified by cou

Resumen del contenido incluido en la página 3

Your ViP 1003 Package Placement Enclosed material Do not cover The following material should be present in your package. Do not place anything on top of the set-top box, instead leave a free space of 20 cm above it for proper ventilation and cooling. r emote control ethernet scart IP set-top box with 2 aaa batteries cable cable When using the remote control, point it to the IR-receiver in the center of the front panel. Make sure that there is no obstacle between the remote control and the se

Resumen del contenido incluido en la página 4

ViP1003 oVer View installing Front panel of models without display Connecting to broadband Connect one end of the Ethernet cable to the connector marked ETHERNET on the rear panel of the set-top box and the other end to a hub or the Ethernet wall connector provided by your broadband operator. Connecting to the TV set Connect one end of the enclosed SCART cable to the SCART connector marked TV on the set-top box and the other end to your TV set. Indicator lED:s IR receiver Both analog audio

Resumen del contenido incluido en la página 5

installing installing Optional: Optional: Connecting High definition Video Connecting to external audio If your TV set is HDTV compatible, you can connect the set-top box to If you want to use an external source to play audio such as a stereo or the TV set using the HDMI connector instead of the SCART connector to home cinema equipment. receive and display HDTV, i.e. skip installation step and replace it with installation step . Using the HDMI connector Digital audio: Using the SPDIF connec

Resumen del contenido incluido en la página 6

installing na Vigating using the remote control The navigation buttons (the inner ring comprised Connecting to power by four arrow buttons and an OK button) are used to move around on Service portal pages and in menus, and to select the highlighted Connecting to power alternative. When all other cables are connected, connect the power cord to the power connector on the set-top box and to mains power. The navigation buttons are also used to navigate web pages, as the buttons of the inner

Resumen del contenido incluido en la página 7

s taR tInG uP When the set-top box is connected to the TV set, Ethernet and power, you will see an image similar to the one to the right on the TV screen. The set-top box is now connecting to the network and downloading the software needed. Please wait until the loading is finished. Five circles will indicate the download progress during the start up of the system. From the start, all circles are dark grey. As the set-top box search- es for software or is processing downloaded software, one