Manual de instrucciones de PYLE Audio PYD-720

Resumen del contenido incluido en la página 1

Please complete warranty card, detach and return
ThankyouforpurchasingthisPYLE
product. To activate your
warranty registration card
warranty, please mail this card
within 10 days.
PYLE PRO MIXERS
Name
Address
City, State ZIP
Model No. Serial # (if available)
Date of Purchase
Purchased at:
Music Products Store Sound Contractor/Installer Mail Order
Catalog Merchandiser Other
PYD-710/PYD-720
2Channel
scratch
Mixer
10–PyleProMixerOwner’sManual
trickster

Resumen del contenido incluido en la página 2

YourPYLEPROSeriesPerformanceMixer FeaturesandControls:PYD710/720Mixer is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels CueSelectorsletyou“preview” accurately to achieve just the right mix for playing through your speaker system or for recording. a

Resumen del contenido incluido en la página 3

PresettingtheControlsBeforeUse ConnectingtheMixerInputs Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected This mixer permits connection of up to five (5) audio input sources, including a microphone. Such a to the mixer output but your hearing as well (especially if you are using headphones), please adjust system might include, for example: the mixer’s controls BEFORE connecting AC power or turning on the unit. One Microphone One Microphone One M

Resumen del contenido incluido en la página 4

UsingHeadphones Plug a pair of stereo headphones (not supplied) with a 1/4” jack into the Phones input. Using 3. Set the desired audio input source’s volume to its minimum setting, headphones not only affords you the opportunity to listen privately, but also enables you to monitor turn it on, and set it to play (or speak continuosly into the microphone). the incoming audio sources so you can locate an exact passage or section before mixing it in. It also gives you the opportunity to set up the r

Resumen del contenido incluido en la página 5

MixingtheInputs, cont. Using the Crossfader When the crossfade slider is in the center 4.SettheChannelAandChannelBvolumecontrol position, the two assigned channels play sliders to approximately 8-10. equally. Sliding the control towards the A position will increase the level of A and fade 5. Rotate the Master Volume Control clockwise out B proportionally to the distance from until you observe an average reading of “0” center. Likewise, sliding the control towards (zero) on both Output Level LED

Resumen del contenido incluido en la página 6

Using the “Punch” Specifications Controls (PYD-720) PYD710/720 This featured control lets you smoothly and quickly turn a playing source on and off, or Input Sensitivity/Impedance Distortion Mic 0.50% switch between the two different input sources Mic 1.5 mV/600 Ohms Phono 0.08% assigned to Crossfade Channel A and B. Phono 1-2 3.0 mV/50K Ohms Line 0.05% Line 1-4 150.0 mV/27K Ohms The effect you get depends upon the position Tone Control of the Crossfader. Treble 10kHz; +/-10dB Output Level Bass