Resumen del contenido incluido en la página 1
OWNER’S MANUAL
SPM-6300
6 Channel Stereo Powered Mixer
MIXERS
Resumen del contenido incluido en la página 2
SPM-6300 6-Channel Stereo Powered Mixer Congratulations on your choice of the NADY SPM-6300 Stereo Powered Mixer — you have purchased one of the finest stereo powered mixing units on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new SPM-6300 has superior performance and greater flexibility than any other stereo powered mixers in its price range. Please read this manual carefully to get the most out of
Resumen del contenido incluido en la página 3
WARNING An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed
Resumen del contenido incluido en la página 4
INSTALLATION To ensure years of enjoyment from your NADY AUDIO SPM-6300 powered mixer, please read and understand this manual thoroughly before using the unit. 1. INSPECTION Your NADY AUDIO SPM-6300 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit. [Please note: Nady Systems is not responsible for shi
Resumen del contenido incluido en la página 5
FRONT CONTROLS AND CONNECTIONS CHANNEL SECTION (1) MIC INPUT This electronically balanced XLR input is designed to accept signals from any balanced or unbalanced low impedance (Low Z) microphone. The XLR jack is configured for: Pin1 = ground, Pin2 = positive (+), Pin3 = negative (-). (3) (2) LINE INPUT This 1/4" input is designed to accept balanced or unbalanced line- level signals such as those from keyboards, drum machines, or samplers. If a balanced signal is to be connected to the line input
Resumen del contenido incluido en la página 6
FRONT CONTROLS AND CONNECTIONS (16) (12) (9) (15) (14) (10) (8) (11) (13) (17) (18) 6
Resumen del contenido incluido en la página 7
FRONT CONTROLS AND CONNECTIONS MASTER SECTION (8) POWER ON/OFF SWITCH & LED This switch turns the unit on and off and the LED indicator will light when the unit is on. (9) ECHO EFFECT This control adjusts the feedback/decay time of the internal Echo Effects DSP. Set this control slightly above minimum to emulate room reverbs and adjust towards maximum for hall and stadium decay reverbs. (10) AUX INPUT The 1/4" Aux input jack can be used to add line level audio signals to the master mix. This s
Resumen del contenido incluido en la página 8
REAR CONTROLS AND CONNECTIONS (22) (20) (19) (19) SPEAKER OUTPUT JACKS The R/Main and L/Monitor outputs are for the Right and Left, or Main and Monitor outputs respectively depending on the Power Amp Selector Switch (18) setting. The 1/4" speaker outputs can deliver up to 150W RMS per side to 4Ω loads. Speaker loads less than 4Ω are not recommended and could result in overheating and damage to the internal amplifiers. If the output audio is noticeably distorted, or sounds like it is turn down
Resumen del contenido incluido en la página 9
CONNECTIONS This NADY AUDIO mixer uses 4 different types of audio connectors for the various input/output connections: (1) XLR balanced; (2) 1/ 4” TRS phone jacks for balanced, unbalanced, stereo, or in/out inserts; (3) 1/4” TS unbalanced; (4) RCA pin unbalanced Figures 1. Balanced XLR input connections 2. Stereo headphone connection with 1/4" TRS plug 3. 1/4" mono (TRS) plug used as unbalanced input/output 4. 1/4" stereo (TRS) plug used as balanced input/output 5. RCA pin plug for unbalanced i
Resumen del contenido incluido en la página 10
SPECIFICATIONS 1. INPUT SECTION Input Connector Input Impedance Max Level MONO CH MIC XLR BALANCED 44K Ω -21dBV 70mV RMS MONO CH LINE 1/4” TRS BALANCED 1.8KΩ +8dBV 2V RMS AUX INPUT 1/4” UNBALANCED 8.7KΩ +15dBV 4V RMS EFFECTS RETURN 1/4” UNBALANCED 8.7KΩ +15dBV 4V RMS TAPE IN STEREO RCA JACKS 7.8KΩ +15dBV 4V RMS 2. OUTPUT SECTION Power Output 8Ω Both Channels Driven (1% THD).......................................... ...
Resumen del contenido incluido en la página 11
NOTES 11
Resumen del contenido incluido en la página 12
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE,
