Resumen del contenido incluido en la página 1
Professional Disc Jockey Products
CM-100
PROFESSIONAL DJ MIXER
USER’S MANUAL
©1999 Industries http://www.numark.com
Resumen del contenido incluido en la página 2
CM100 h) Power Sources - This product should be connected to a Safety Information power supply only of the type described in these operating instructions, or as marked on the unit. i) Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord. j) Object and Liqui
Resumen del contenido incluido en la página 3
CM100 VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item. • Never use spray cleaners on the slide controls . Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years. If they malfunction (usually because of a dirty or
Resumen del contenido incluido en la página 4
CM100 CM100 PROFESSIONAL DJ MIXER CONGRATULATIONS! You have purchased the CM100 Stereo Mixer by . This mixer has been designed to provide dependable control over your input and output sources. Whether you install this piece in a permanent environment or take it on the road, you are sure to utilize the features of the CM100. The CM100 features all new circuitry and the latest in manufacturing and design technology to give you greater quality and better reliability than ever before. The fader-
Resumen del contenido incluido en la página 5
CM100 TABLE OF CONTENTS Safety Measures 2 Important Information 3 Registration 3 Introduction 4 Quick Setup Diagram 7 Description of the Features 8 Specifications 11 Warranty 12 - The Leader in DJ Technology ©1999 Industries - 5 - http://www.numark.com
Resumen del contenido incluido en la página 6
CM100 - The Leader in DJ Technology ©1999 Industries - 6 - http://www.numark.com
Resumen del contenido incluido en la página 7
CM100 QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all stereo input sources. Next, connect your microphone(s) and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio sources. Plug your mixer into AC power. Now you are ready to switch everything on. Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. Whe
Resumen del contenido incluido en la página 8
CM100 MIXER FEATURES 25 8 3 16 19 2 15 26 4 1 12 5 6 14 7 13 23 20 18 9 10 24 22 21 11 17 We have divided this section into various functional 8. Neutrik™ “Combo” connector - allows connection blocks: Inputs, Microphone, Crossfader, Equalizer, Outputs, of either a 1/4” jack or an XLR jack. This is ideal for and Headphone Cueing. It is important to learn how each of connecting an XLR gooseneck directly into the mixer. these work. CROSSFADER INPUTS 9. Crossfader Assign Knob - determines wh
Resumen del contenido incluido en la página 9
CM100 EQUALIZER OUTPUTS 12. 5-Band Stereo Graphic Equalizer (EQ) - 14. Master Fader – to control the overall output level. compensates for differences in source material sound 15. Stereo/Mono toggle - adjusts the Master output for quality. In ultra-compact mobile systems this EQ can be stereo or mono operation. used to tailor the sound to the acoustical requirements of 16. Panning – adjusts the balance of right to left audio. the room. Center frequencies are 63Hz, 250Hz, 1kHz, 4kHz and 16k
Resumen del contenido incluido en la página 10
CM100 REAR PANEL FEATURES 38 29 28 36 40 39 31 37 35 34 33 32 30 27 27. Phono Inputs – for attaching your turntables. When 32. Cue/Send Output – to temporarily send channel PFL these connectors are used, your signal is fed directly to the signal to an external sampler or other source such as both high-quality RIAA phono pre-amplifiers. Use this monitor. Your PFL cue buttons selects the source. position only for turntables . Line level sources will 33. Record Outputs – are unbalanced RCA ja
Resumen del contenido incluido en la página 11
CM100 SPECIFICATIONS INPUTS: Line: 10kΩ input impedance 85mV rms sensitivity (for 1.22V output) Mic: 10kΩ input impedance unbalanced 2 mV rms sensitivity (for 1.22V output) 60mV rms max input Phono:47kΩ input impedance 1.5mV rms sensitivity @ 1 KHz (for 1.22V output) OUTPUTS: Line: 9V rms max Headphone Amp: 0.5 watt into 47Ω Distortion less than 0.01% SIGNAL TO NOISE RATIOS* (vs. maximum output): Line: Better than 96 dB Mic: Better than 78 dB Phono:Better than 87 dB *JIS - weighted FREQUENCY RES
Resumen del contenido incluido en la página 12
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years. The warranty is extended to (3) Years with the comple
