Resumen del contenido incluido en la página 1
PARTS AND OPERATION MANUAL
PLASTER/ MORTAR MIXERS
WM-900S
WM-900P
Revision #7 (03/17/06)
MULTIQUIP INC. . . . . PARTS DEPARTMENT:
18910 WILMINGTON AVE. 800-427-1244
CARSON, CALIFORNIA 90746 FAX: 800-672-7877
310-537-3700 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
800-421-1244 800-478-1244
FAX: 310-537-3927 FAX: 310-631-5032
E-mail:mq@multiquip.com � www:multiquip.com
© COPYRIGHT 2001, MULTIQUIP INC.
Resumen del contenido incluido en la página 2
PAGE 2 — WHITEMAN WM-900S, 900P — PARTS & OPERATION MANUAL — REV. #7 (03/17/06)
Resumen del contenido incluido en la página 3
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 WHITEMAN WM-900S, 900P — PARTS & OPERATION MANUAL — REV. #7 (03/17/06) — PAGE 3
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS Here's How To Get Help .......................................... 3 Table of Contents .................................................... 4 Parts Ordering Procedures ..................................... 5 Rules for Safe Operation & Safety Decals .............. 6 Warranty .................................................................. 7 WHITEMAN — 900S & 900P Operations ......................................................... 8-10 Specifications ...........................
Resumen del contenido incluido en la página 5
st Effective: June 1 , 2005 PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Order parts on-line using Multiquip’s SmartEquip website! Username and Password, E-mail us at: parts@multiquip.com. ■ View Parts Diagrams To obtain an MQ Account, contact your ■ Order Parts District Sales Manager for more information. ■ Print Specification Information Use the internet and q
Resumen del contenido incluido en la página 6
RULES FOR SAFE OPERATION & SAFETY DECALS ■ Do not operate or service this equipment ■ When towing, an adequate safety chain before reading the operating and maintenance must be fastened to the frame, refer to page 9. instructions manual or serious injury may ■ Keep all inexperienced and unauthorized result. people away from the equipment at all times. ■ Do not operate this equipment unless all ■ Unauthorized equipment modifications will guards and safety devices are attached and void all warran
Resumen del contenido incluido en la página 7
WARRANTY There are no warranties, express or implied, made by Multiquip There are no warranties, express or implied, in addition to the Inc. hereunder on Products manufactured or distributed by it above except as may be provided in writing by Multiquip Inc. except the warranty against defects in material and workmanship MULTIQUIP INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, on new Products to the original purchaser, as hereinafter set INDIRECT OR CONSEQUENTIAL DAMAGES. forth. THE FOREGOING WARRANTI
Resumen del contenido incluido en la página 8
WM-900S, 900P — OPERATIONS Refer to the following chart. For recommend plug sizes. 115 VOLT 1Ø 230 VOLT 1Ø MOTOR WM 700 WM 900 PIGTAIL CAP CONN BODY PIGTAIL CAP CONN BODY HORSE NEMA/ NEMA/ NEMA/ NEMA/ POWER WHITEMAN WHITEMAN WHITEMAN WHITEMAN 1½ & 3 HPL6 5-30P/940545L0 5-30R/94054L1 6-15P/94055 L6-15R/94055 CONTROLS KILL SWITCH: (Gasoline Engine Only) Located on the side of GENERAL the engine cover. The Whiteman WM-700 and WM-900 Series plaster and mortar ENGINE THROTTLE AND CHOKE CONTROLS: Plea
Resumen del contenido incluido en la página 9
WM-900S, 900P — OPERATIONS BEARING BRACKET NOTE: It is critical that the length of chain be properly adjusted to prevent the Draw Bar and front mixer stand from Grease the bearing bracket every month. dropping to the ground (contact) in the event the Draw Bar becomes disconnected from the towing vehicle. COUNTERSHAFT STEP 1 The countershaft rotates on two self-aligned pillow block bearings. Grease these every 40 hours using grade #1 Lithium Base grease. DRAW BAR GEAR ALIGNMENT The countershaft a
Resumen del contenido incluido en la página 10
WM-900S, 900P — OPERATIONS DANGER BEFORE TOWING The following is the recommended wiper blade adjustments: 1) STEEL DRUM MIXERS SIDE SCRAPER SIDE SCRAPER SIDE SCRAPER SIDE SCRAPER SIDE SCRAPER BALL HITCH COUPLER 1. Check vehicle hitch, ball, and coupler for signs of wear or damage. Replace any parts that are worn or damaged before towing. 2. Use only the 2" ball diameter as indicated on your coupler. Use of any other ball diameter will create an extremely END SCRAPER END SCRAPER END SCRAPER END S
Resumen del contenido incluido en la página 11
WM-900S, 900P — SPECIFICATIONS WM-900S SPECIFICATIONS MODEL U.S.(inch) METRIC CAPACITY ....................................................9 CUBIC FEET ....................................................... 248 LITERS BAG CAPACITY .............................................2½ - 3½ ............................................................ 2½ - 3½ WEIGHT (APPROX.) ........................................870 LBS. ............................................................. 395 KG. L X W X H
Resumen del contenido incluido en la página 12
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant. Section 2: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a ser
Resumen del contenido incluido en la página 13
WM-900S, 900P — SUGGESTED SPARE PARTS WM-900S/P WM-900S/P 1 to 3 Units 5+ Units Qty. P/N Description Qty. P/N Description 3 ......... EM505834 ........... V-BELT 5 ......... EM505834 ........... V-BELT 3 ......... 491115 ................ V-BELT, w/ELECTRIC MOTOR 5 ......... 491115 ................ V-BELT, w/ELECTRIC MOTOR 6 ......... 491010 ................ LATCH ASSY 10 ....... 491010 ................ LATCH ASSY 3 ......... EM200863 ........... BLADE KIT STEEL DRUM 5 ......... EM200863 ........
Resumen del contenido incluido en la página 14
WM-900S, 900P — DRUM HEAD ASSEMBLY 26 25 PAGE 14 — WHITEMAN WM-900S, 900P — PARTS & OPERATION MANUAL — REV. #7 (03/17/06)
Resumen del contenido incluido en la página 15
WM-900S, 900P — DRUM HEAD ASSEMBLY DRUM HEAD ASSEMBLY NO. PART NO. PART NAME QTY. REMARKS 2 EM200297 U-BOLT 2 EM968011 NUT HEX ½-13 4 3 EM200292 U-BOLT INSERT 4 4 3249 DUST CAP ............................................................................. 1 ................ REPLACES 50017 5 EM902153 BEARING 2 6 500076 BRACKET, DUMP BEARING .................................................. 2 ................ S/N 750002 THRU 750179 6 EM507720 BRACKET, DUMP BEARING .................................
Resumen del contenido incluido en la página 16
WM-900S, 900P — PADDLE SHAFT ASSEMBLY PAGE 16 — WHITEMAN WM-900S, 900P — PARTS & OPERATION MANUAL — REV. #7 (03/17/06)
Resumen del contenido incluido en la página 17
WM-900S, 900P — PADDLE SHAFT ASSEMBLY PADDLE SHAFT ASSEMBLY NO. PART NO. PART NAME QTY. REMARKS 46 EM200297 U-BOLT 2 47 EM968011 NUT ½"-13 4 48 EM200292 U-BOLT INSERT 4 49 507269 PADDLE SHAFT 1 50 EM200293 PADDLE ARM-TOW END 1 51 EM200294 PADDLE ARM-CENTER 1 52 EM200296 PADDLE ARM-ENGINE END 1 53 EM200295 PADDLE ARM-CENTER 1 54 # EM203432 CENTER BACK-UP BLADE 4 * 55 # EM203433 END BACK-UP BLADE 2 * 56 EM200212 TOP RUBBER BLADE (STEEL) DRUM ONLY 4 * 56# EM507519 TOP PLASTIC BLADE (POLY) DRUM ONLY
Resumen del contenido incluido en la página 18
WM-900S — STEEL DRUM STEEL DRUM 109 110 111 108 PAGE 18 — WHITEMAN WM-900S, 900P — PARTS & OPERATION MANUAL — REV. #7 (03/17/06)
Resumen del contenido incluido en la página 19
WM-900S — STEEL DRUM STEEL DRUM COMMON PARTS NO. PART NO. PART NAME QTY. REMARKS 100# EM201537 DUMP HANDLE 1 101 ELC1 TOWING TONGUE (P. EYE) ................................... 1 .............. NO LONGER AVAILABLE 101 EPC1 TOWING TONGUE (PIN HOLE) ............................. 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM 101 EBC1 TOWING TONGUE (BALL HITCH) ......................... 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM 102 EM963580 CAP SCREW ...........................
Resumen del contenido incluido en la página 20
WM-900P — POLYETHYLENE DRUM POLYETHYLENE DRUM 121 122 123 124 125 116 126 123 124 PAGE 20 — WHITEMAN WM-900S, 900P — PARTS & OPERATION MANUAL — REV. #7 (03/17/06)
