Resumen del contenido incluido en la página 1
PARTS AND OPERATION MANUAL
MIX N' GO
MINI CONCRETE MIXER
STEEL DRUM MODELS
MC3SE, MC3H (HONDA)
Revision #0 (09/09/02)
MULTIQUIP INC. . . . . PARTS DEPARTMENT:
18910 WILMINGTON AVE. 800-427-1244
CARSON, CALIFORNIA 90746 FAX: 800-672-7877
310-537-3700 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
800-421-1244 800-478-1244
FAX: 310-537-3927 FAX: 310-631-5032
E-mail:mq@multiquip.com � www:multiquip.com
Atlanta • Boise Dallas Houston Newark
Montreal, Canada Manchester, UK
Rio De Janiero
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 MIX N' GO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/09/02) — PAGE 3
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS Here's How To Get Help ............................................ 3 Honda G100K2QA2 Engine Table Of Contents ..................................................... 4 Air Cleaner Assy. ................................................ 38-39 Parts Ordering Procedures ....................................... 5 Camshaft Assy. .................................................. 40-41 Carburetor Assy. ................................................ 42-42 Control Assy. ................
Resumen del contenido incluido en la página 5
PARTS ORDERING PROCEDURES ■■■■■ Dealer account number ■■■■■ Dealer name and address ■■■■■ Shipping address (if different than billing address) ■■■■■ Return fax number ■■■■■ Applicable model number ■■■■■ Quantity, part number and description of each part ■■■■■ Specify preferred method of shipment: UPS Ground UPS Second Day or Third Day* UPS Next Day* Federal Express Priority One (please provide us with your Federal Express account number)* Airborne Express* Truck or parcel post *Norma
Resumen del contenido incluido en la página 6
MIX N' GO MIXER — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in Lethal Exhaust Gases injury to yourself and others. Engine exhaust gases contain poisonous This Owner's Manual has been carbon monoxide. This gas is colorless and developed to provide complete odorless, and can cause d
Resumen del contenido incluido en la página 7
MIX N' GO MIXER — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine or electric motor ON/OFF switch in the OFF position when the ALWAYS wear approved respiratory mixer is not in use. protection. Equipment Damage Messages Sight and Hearing hazard Other important messages are provided throughout this manual to help prevent damage to your mixer, other property, or the surrounding environment. ALWAYS wear approved eye and hearing protection. This mixer, oth
Resumen del contenido incluido en la página 8
RULES FOR SAFE OPERATION ■ NEVER touch the hot exhaust manifold, DANGER: muffler or cylinder. Allow these parts to Failure to follow instructions in this manual may cool before servicing engine or mixer. lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the Mix N' Go Mixer: ■ High Temperatures – Allow the engine to cool befo
Resumen del contenido incluido en la página 9
RULES FOR SAFE OPERATION ■ NEVER Run engine without air cleaner. Severe engine ■ High Temperatures – Always stop engine and allow the damage may occur. engine to cool before adding fuel, oil or performing service and maintenance functions. Contact with hot components can ■ ALWAYS read, understand, and follow procedures in cause serious burns. Operator’s Manual before attempting to operate equipment. ■ NEVER disconnect any "emergency or safety devices". ■ ALWAYS be sure the operator is familiar
Resumen del contenido incluido en la página 10
RULES FOR SAFE OPERATION Emergencies ■ ALWAYS know the location of the nearest fire extinguisher. ■ ALWAYS know the location of the nearest first aid kit. ■ In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency. PAGE 10 —MIX N' GO MIXER — PARTS & OPERATION MANUAL — REV. #1 (09/09/02)
Resumen del contenido incluido en la página 11
OPERATION AND SAFETY DECALS Machine Safety Decals The Mix N' Go mixer is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. The illustration below and on the next page shows these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. WARNING! ALARMA! AVERTISSEMENT! ENGLISH - WARNING! TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND INSTRUCTION
Resumen del contenido incluido en la página 12
OPERATION AND SAFETY DECALS WARNING! ADVERTENCIA! AVERTISSEMENT! 1. Read owner’s manual before operating mixer. 1. Lea el manual de operació antes de usar la mezcladora. 1. Lisez le manual d’ utilisation avant d’ utiliser le le malaxeur. 2. Keep unauthorized and untrained people away 2. Mantenga personas que no estén autorizadas o capacitadas 2. Seul un personnel qualifié peut être authorisé à se trouver à proximité from mixer during operation. alejades de la mezcladora durante el funcionamiento
Resumen del contenido incluido en la página 13
MIX N' GO MIXER — SPECIFICATIONS Table 1. Specifications (Engine & Electric Motor) M2 odelH4 ONDA G100K2QA BALDOR 17LYE30 3/4 HP, 120 VAC, Single Tr ype 4-stroke, Side valve, Single Cylinde Phase Electric Motor 20.5 in. X 18.1 in. Bore X Stroke N/A (52 mm x 46 mm) D) isplacement 6A .0 cu. in. (98 cc N/ M. ax Output2M .5 H.P. at 3,600 R.P.M 3/4 H.P./3,450 RP Engine/Electric Motor S. tandard Idle Speed1A ,400 ± 100 R.P.M N/ Approx. 0.37 U.S. Gallons Fuel Tank Capacity N/A (1.4 Liters) Fe uel UA nl
Resumen del contenido incluido en la página 14
MIX N' GO MIXER — DIMENSIONS (MIXER) Figure 1. Mix N' Go Mixer Dimensions PAGE 14 —MIX N' GO MIXER — PARTS & OPERATION MANUAL — REV. #1 (09/09/02)
Resumen del contenido incluido en la página 15
MIX N' GO MIXER — DIMENSIONS (ELECTRIC MOTOR) Figure 2. Electric Motor MIX N' GO MIXER — PARTS & OPERATION MANUAL — REV. #1 (09/09/02) — PAGE 15
Resumen del contenido incluido en la página 16
MIX N' GO MIXER — GENERAL INFORMATION PORTABLE GENERATORS APPLICATION This mixer is only intended for the production of concrete, When using a portable generator it must have a minimum mortar and plaster. The mixer must be used for its intended output of 2.5 kw and be continuous rated. purposes and is not suitable for the mixing of flammable or GEARBOX explosive substances. The mixer must not be used in an The gearbox oil level has been preset at the factory prior to explosive atmosphere. ship
Resumen del contenido incluido en la página 17
MIX N' GO MIXER — MIXER COMPONENTS Figure 4 shows the basic components of the Mix N' Go Mixer. Figure 4. Mixer Components Table 3. MIXING HINTS BATCH QUANTITIES APPROX. BATCH MIX CEMENT 112 lbs.SE AND STON APPLICATIONS OUTPUT RATIOS (50 Kgs.) Bag CR U. FT.L. TCR U. FTL. TCR U. FT LT 1G :2:4 14 /2 BA 15 -1/ 3221 -1/ 73 85 Most Ordinary 1G :3:6 14 /3 BA 15 -1/ 3221 -1/ 7428 -3/ 7 Foundations 1G :4:8 14 /4 BA 15 -1/ 3221 -1/ 7428 -3/ 7 Rough Mass Concrete Watertight Floors,1G :1-1/2:324 /3 BA 15 -
Resumen del contenido incluido en la página 18
MIX N' GO MIXER — BASIC ENGINE Figure 5. Engine Controls and Components INITIAL SERVICING 7. Air Cleaner – Prevents dirt and other debris from entering The engine (Figure 5) must be checked for proper lubrication and the fuel system. Remove wing-nut on top of air filter filled with fuel prior to operation. Refer to the manufacturers engine cannister to gain access to filter element. manual for instructions and details of operation and servicing. The engine shown above is a HONDA engine, ope
Resumen del contenido incluido en la página 19
MIX N' GO MIXER — ASSEMBLY INSTRUCTIONS Assembly 1. Remove the mixer drum and associated components from the packing container (Figure 6). Match the components against the parts list to make sure that they are all accounted for. Figure 6. Packing Container Figure 8. Mixing Drum Placement 2. Place the mixer frame on a secure level surface, and attach the top cover as shown in Figure 7. 4. Place the two halves of the support stand together (Figure 9). The left support stand fits into the center
Resumen del contenido incluido en la página 20
MIX N' GO MIXER — ASSEMBLY INSTRUCTIONS 6. Tip mixer onto mouth as shown in Figure 10, and insert 9. Before attempting to lift mixer, locate the frame locking clip. support stand into frame swivel point. Attach the locking clip as shown in Figure 12. This will prevent the mixing drum from moving when the mixer is positioned in an upright position. Figure 12. Frame Locking Clip 10. DO NOT tilt the mixer on a wet, smooth or slippery surface. Figure 10. Attaching Support Stand 7. Remove both whe
