Resumen del contenido incluido en la página 1
2-347-836-21 (1)
Digital Powered
Mixer
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Note
The supplied CD-ROM includes operating instructions for
the SRP-X700P Digital Powered Mixer (English, Japanese,
French, German, Spanish, Italian and Chinese versions).
SRP-X700P
Ver. 1.2
2003 Sony Corporation
Resumen del contenido incluido en la página 2
WARNING For customers in the U.S.A. CAUTION You are cautioned that any changes or Declaration of Conformity To prevent fire or shock modification not expressly approved in hazard, do not expose the Trade Name : SONY this manual could void your authority unit to rain or moisture. Model No. : SRP-X700P to operate this equipment. Responsible Party : Sony INFORMATION Electronics Inc. To avoid electrical shock, This equipment has been tested and Address : 680 Kinder- do not open the
Resumen del contenido incluido en la página 3
Table of Contents Features Features ......................................................................................... 3 The SRP-X700P is a versatile digital powered mixer that incorporates an audio mixer, RGB/video switcher, processor Location and function of parts .................................................... 4 and power amplifier in the 3U rack size. Front panel ................................................................................. 4 Built-in digital mixer Rear panel
Resumen del contenido incluido en la página 4
Location and function of parts Front panel 1 3867 OUTPUT VU 2 VU MIC1/WL1 MIC2/WL2 MIC3 MIC4 MIC5/LINE1 MIC6/LINE2 LINE3 LINE4 1345678 MASTER A MASTER B +3 +3 SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL 0 0 OVER GAIN PROTECTION OVER GAIN OVER GAIN OVER GAIN OVER GAIN OVER GAIN OVER GAIN OVER GAIN OVER GAIN OVER GAIN -5 -5 CLIP - - SCENE -10 -10 - - - - - - - - -20 -20 RECALL POWER LINE 4 SELECT AB MASTER A ON OFF A LOCK B B 9 C RS-232C 0 C USB D qa E D F WL 1 MIC TUNER WL 2 qs 2 5 4
Resumen del contenido incluido en la página 5
7 Power amplifier indicators • PROTECTION indicator The PROTECTION indicator lights in red when the protection circuit of the internal power amplifier works. • CLIP indicator The CLIP indicator lights in red when the output level of the internal power amplifier is excessive such that the output signal is distorted. Notes When the PROTECTION indicator lights The protection circuit operates (PROTECTION indicator lights) and the speaker and amplifier are protected from damage by decreasing or cutti
Resumen del contenido incluido en la página 6
Location and function of parts Rear panel qh qa 0 qd 9 w; ANT IN a LINE4 INPUT ANT IN b OUTPUT SPEAKERS CH-2 CH-1 IMPEDANCE USE IMPEDANCE USE 4-16 4-16 DC DC 9V OUT 9V OUT 35mA MAX 35mA MAX S VIDEO VIDEO S VIDEO R/R-Y G/Y B/B-Y SYNC/HD VD VIDEO COMPONENT/RGB CIRCUIT BREAKER 5 PUSH RESET 70V LINE IMPEDANCE USE 32 -10k LINE3 INAC B D E F CONTROL S PROJECTOR CONTROL REMOTE FRONT REAR CENTER FRONT REAR CENTER OUTPUT CONTROL S 1 3 IN RS-232C PARALLEL RS-232C L L L L L L WOOFER WOOFER qg 4 2 4 OUT R
Resumen del contenido incluido en la página 7
0 Video output terminals qh ANT IN terminal The video signal that is selected by the LINE 4 SELECT The antenna input terminal for the wireless tuner. button on the front panel is output from this terminal. (The Connect a UHF antenna of the AN-820A (option). video signal format is not converted from each other.) 9V power is supplied from this terminal as the power for the antenna booster. Do not connect any antenna other than the AN- • 5BNC output terminals 820A, otherwise the system may not work
Resumen del contenido incluido en la página 8
Location and function of parts Please refer to the table Sony 800 MHz-band system models Tuner Unit frequency range in the Operating Manual of Wireless Microphone or Transmitter. How to install the tuner unit 13 1 Turn off the power of this unit. 2 Remove the tuner cover. GP AF BATT 3 Check the up and down sides of the tuner unit, and insert it into RF the slot. (Fig. 1) CH GP CH Tuner unit 24 Display 5 6 7 AF BATT Fig. 1 RF 8 4 After installation of the tuner unit, turn on the power of the unit
Resumen del contenido incluido en la página 9
How to Control the Display from the SRP-X700P For the projectors that the SRP-X700P supports by default, refer to the “List of supported projectors” on a separate document. PROJECTOR CONTROL RS-232C Terminal To connect the RS-232C terminal of applicable projectors and that of plasma display to this terminal; This model can switch the input signals and power ON/STANDBY of the projector and plasma display in interlocked condition. (D-sub 9-p
Resumen del contenido incluido en la página 10
How to Control the SRP-X700P from External Equipment REMOTE PARALLEL Terminal The REMOTE PARALLEL terminal enables the SRP-X700P to be remotely controlled with a simple circuit connected externally to (D-sub 25-pin, female) this terminal. Terminal shape : D-sub 25-pin, female Recommended cable : Multi-core shielded cable for data Pin No. SRP-X700P Function communication Cable length : 50 m or less 1 GND Input terminal 0 dB (No. 2 to No. 13) 2 INPUT1 INPUT terminal 3 IN
Resumen del contenido incluido en la página 11
How to Control AV Equipment from the SRP-X700P The SRP-X700P can control the Sony equipment connected to the CONTROL S OUTPUT1 through 4 terminals. The functions which can be operated are as follows. Note that the functions of REC, POWER ON, and POWER STANDBY cannot be operated from the supplied software SRP-X700P Manager and User Control Panel, to prevent the system from malfunctioning. POWER POWER PREV. NEXT STOP REW. PLAY F.F. PAUSE REC ON STANDBY MD aaaa a aaaaa CD-R Audio VTR1 (Beta) VTR2 (
Resumen del contenido incluido en la página 12
System Configuration System example when operating the SRP-X700P with the default setting when shipped from the factory 12 LCD data projector S VIDEO VIDEO R/G/B/HD/VD Y/R-Y/B-Y RS-232C To power outlet Front speaker (L) Front speaker (R) ANT IN a LINE4 INPUT ANT IN b OUTPUT SPEAKERS CH-2 CH-1 IMPEDANCE USE IMPEDANCE USE 4-16 4-16 DC DC 9V OUT 9V OUT 35mA MAX 35mA MAX S VIDEO VIDEO S VIDEO VIDEO COMPONENT/RGB R/R-Y G/Y B/B-Y SYNC/HD VD CIRCUIT BREAKER PUSH RESET 70V LINE IMPEDANCE USE 32 -10k L
Resumen del contenido incluido en la página 13
System example when external operation panel and environment equipment are connected 13 LCD data projector S VIDEO VIDEO R/G/B/HD/VD Y/R-Y/B-Y RS-232C or CONTROL S To power outlet Front speaker (L) Front speaker (R) External operation panel ANT IN a LINE4 INPUT ANT IN b OUTPUT SPEAKERS CH-2 CH-1 IMPEDANCE USE IMPEDANCE USE 4-16 4-16 DC DC 9V OUT 9V OUT 35mA MAX 35mA MAX S VIDEO VIDEO S VIDEO VIDEO COMPONENT/RGB R/R-Y G/Y B/B-Y SYNC/HD VD CIRCUIT BREAKER PUSH RESET 70V LINE IMPEDANCE USE 32 -10
Resumen del contenido incluido en la página 14
System Configuration System example when operating the SRP-X700P from the REMOTE PARALLEL terminal The REMOTE PARALLEL terminal of the SRP-X700P is shipped from the factory with the default setting on the premise of the external operation panel as described below. Camera VHS DV DVD PC1 PC2 MIC AV START Stand FINISH EMG STOP START button (SCENE No. 1 recall): Sets OUTPUT7 and OUTPUT9 to ON to lower the screen, to close the curtain, to darken the illumination and to start presentation. FINISH butt
Resumen del contenido incluido en la página 15
Default settings INPUT AUTOMATIC MIXER SETUP Item Initial setting Item Initial setting MIC1 - MIC4 –60 dBu ON/OFF ON TRIM MIC5/LINE1, MIC6/LINE2 +4 dBu DEFAULT/EDIT DEFAULT LINE3, LINE4A - 4F –10 dBu THRESHOLD –3 dB MIC1 - MIC4 ON RATIO 3 : 1 LCF COMPRESSOR MIC5/LINE1, MIC6/LINE2 OFF ATTACK 22 ms PEQ OFF RELEASE 100 ms FR OFF THRESHOLD –30 dB INPUT COMP OFF GATE HOLD 1000 ms AUTOMATIC MUTING OFF RELEASE 470 ms MIXER GAIN LIMIT +10 dB NOM OFF INPUT FADER 0 dB ONLY ONE OFF Band 1 63 Hz LAST ON OFF
Resumen del contenido incluido en la página 16
Default settings OUTPUT REMOTE Item Initial setting Item Initial setting OUTPUT1, OUTPUT2 +4 dBu INPUT1 AV SEL A REF LEVEL OUTPUT3 - OUTPUT8 –5 dBu INPUT2 AV SEL B REC OUT1, REC OUT2 –5 dBu INPUT3 AV SEL C HCF OFF INPUT4 AV SEL D EQ OFF INPUT5 AV SEL E DELAY 0 ms INPUT INPUT6 AV SEL F MUTING OFF INPUT7 RECALL 1 GAIN LIMIT +10 dB INPUT8 RECALL 2 OUTPUT FADER 0 dB INPUT9 RECALL 3 Band 1 25 Hz INPUT10 LVL Master A Band 2 40 Hz INPUT11 LVL Master B PARALLEL I/O Band 3 80 Hz INPUT12 NONE Band 4 160 H
Resumen del contenido incluido en la página 17
Block Diagram 17 +48V CLIP 70V LINE OVER TRIM PROTECTION SIGNAL GAIN - ∞ MIC 1,2 MUTING 3BAND COMP MODE POWER SP OUT WL1,2 A/D LCF FR D/A PEQ AMP 1,2 TUNER ANT a,b MUTING FADER ATT SLOT RF IND. LEVEL SIGNAL SELECTOR +48V METER OVER TRIM OUTPUT 3BAND COMP MIC 3,4 GAIN - ∞ A/D LCF FR LEVEL PEQ 11BAND MUTING FADER DELAY D/A LINE PEQ +48V OUT 1,2 SIGNAL +4/0/-5/-10 MUTING FADER LINE TRIM MIC5/LINE1 3BAND COMP A/D LCF FR MIC6/LINE2 PEQ 4BAND 14IN 10OUT MUTING FADER DELAY D/A LINE PEQ
Resumen del contenido incluido en la página 18
Specifications AUDIO INPUT/OUTPUT Input Terminal shape Circuit Channel Reference input level Maximum input level Impedance MIC 1/WL 1, MIC 2/WL 2, XLR 3-31type Balanced Monaural –60 to –45 dBu –37 to –22 dBu 2.2 kΩ or more MIC 3, MIC 4 MIC 5/LINE 1 –60 to –45 dBu –37 to –22 dBu 2.2 kΩ or more (in MIC mode) XLR 3-31type Balanced Monaural MIC 6/LINE 2 –10 to +4 dBu +10 to +24 dBu 10 kΩ (in LINE mode) LINE 3 Pin Unbalanced Stereo –10 to 0 dBu +10 dBu 10 kΩ or more LINE 4 (A B C F) Pin Unbalanced St
Resumen del contenido incluido en la página 19
General To prevent electromagnetic wave interference due to portable Power requirement AC 120 V, 50/60 Hz communication devices: Power consumption 150 W If communication devices such as cellular phones are used Dimensions 482 × 132 × 350 mm (w/h/d) near this unit, incorrect operation may be caused or the image, 1 7 (19 × 5 /4 × 13 /8 inches) sound, etc. may be affected. Turn off the power of all portable (excluding protrusions) communication devices near this unit if possible. Mass Approx. 13 kg
Resumen del contenido incluido en la página 20
Troubleshooting Before contacting us, please check the following again. If the trouble persists, please contact your local Sony Sales office or Dealer. Start the supplied software SRP-X700P Manager and check the settings of the SRP-X700P. Check the following if the problem still cannot be solved. Symptom Cause/Remedy Power is not turned on. • Power cord is disconnected. → Firmly insert the power cord fully into the AC IN terminal and wall outlet. No sound is output. • Input fader is decreased. →
