Resumen del contenido incluido en la página 1
Contents
1. Quick Start 1
Features 1
What You Need to Begin 2
Installing the Battery 2
The Basic Controls 3
Play Music 5
Listen to the FM Radio 7
2. Playing Music 9
Connecting and Disconnecting 9
Using the Music Controls 9
Listening to Music 10
Transferring Music 11
Adjusting Settings 12
3. Listening to the FM Radio 16
Using the FM Radio Controls 16
Finding a Radio Station 17
Accessing Preset Channels 18
Save a Radio Station as a Preset 18
Setting Preset Stations Automatica
Resumen del contenido incluido en la página 2
1 This chapter helps you get started quickly playing music and listening to the FM radio with your SanDisk Sansa™ e100 Series MP3 Player. Quick Start Congratulations on your purchase of a SanDisk Sansa e100 Series MP3 Player! This chapter will help you to become familiar with your new purchase as quickly as possible. Features Your Sansa MP3 Player is a full-featured music device that can be carried with you anywhere. Plays MP3, WMA, secure WMA and Audible audio file formats. The bac
Resumen del contenido incluido en la página 3
What You Need to Begin To add music to the Sansa e100 MP3 Player, the following are needed: Intel Pentium PC or equivalent. Windows 2000 or Windows XP (Windows Media Player 9 or 10). CD-ROM drive USB 2.0 port required for High-Speed transfer. Supports MP3, WMA, secure WMA and Audible audio file formats Your Sansa Package contains: Sansa e100 Series MP3 Player Earphones Armband AAA battery USB 2.0 travel cable CD with valuable software and User Manual Quick Start Guide
Resumen del contenido incluido en la página 4
Figure 1. Installing the AAA Battery The Basic Controls Your player has an easy to use set of controls that provide a wide range of functionality. Basic Controls are shown in Figure 2. Left Side Front Right Side (with Hold) (with Rotary Wheel, Power/Menu, SD Slot) Top (with Headphone Jack, USB, Rotary Wheel Figure 2: The Basic Controls The control names and their functions are described in Table 1 below. Quick Start 3
Resumen del contenido incluido en la página 5
Table 1: Control Names and Functions Control Name Function(s) Power/Menu Button Located on the right side of the player: • Press and Hold to turn the player on or off. • Press once to enter the menu • Press to exit menu display during menu navigation • Press to cancel the change in setting menu Select Button Located on the front of the player: • Select a song or menu • Press to view secondary information about a song during playback, for example, song format and playback data ||
Resumen del contenido incluido en la página 6
Control Name Function(s) Located on the right side of the player, below the SD Slot SD Slot Power/Menu Button, insert SD card to expand the storage capacity of your player. For more information about the onscreen menus, see the Navigating the Software Menus in the user guide on Page 21. Play Music To play music files, you need to transfer music to your player. Transfer Music The first step to playing music is to transfer files to your player. Follow these steps: 1. Use the USB connect
Resumen del contenido incluido en la página 7
NOTE: If you do not see music files onscreen, briefly press the Power/Menu Button on the right side of your player. The software Menu will appear. Use the Repeat/AB/Down Button to scroll and highlight Modes. Press the Select Button to select Modes. Press the Play/Pause/Up Button to scroll then highlight the Audio Playback mode. Press the Select Button to enter music mode. 2. Press the Previous/Fast Reverse or Next/Fast Forward Buttons to move backwards or forwards through your music files.
Resumen del contenido incluido en la página 8
Use Your SD Slot to Add Memory Your SanDisk Sansa e100 Series Player includes an SD slot that lets you add up to 2GB of additional memory to your player. Follow these steps: 1. Locate the SD slot on the right side of your player below the Power/Menu Button. Remove the rubber cover to open the slot. Store the cover in a safe place. 2. Insert your SD card into the slot with the label side facing upwards. When your music player is plugged into your computer the SD card will appear as another
Resumen del contenido incluido en la página 9
3. To change the volume of your music as it plays, press and scroll the Rotary Wheel in the top right corner of your player. 4. To stop playing the FM radio, you have two choices: Press and hold down the Power/Menu Button until all the dark squares disappear under the “Powering Down” message. Press the Power/Menu Button briefly to navigate the software Menu to switch to Music mode by selecting Play Music with the Select Button and using the Next/Fast Forward Button and Previous/Fast Rev
Resumen del contenido incluido en la página 10
2 This chapter helps you get started playing music on your SanDisk Sansa e100 Series MP3 Player. Playing Music Your player can play music files stored in MP3, WMA, secure WMA and Audible audio file formats. This chapter shows you how to upload and play your music files. Connecting and Disconnecting Your player includes a USB connection cable so that you can transfer music files from your computer to your player or SD card. The small end fits into the USB port at the top of your player.
Resumen del contenido incluido en la página 11
1. Press the Power/Menu Button briefly once. The SanDisk Welcome message will appear onscreen after a moment then disappear. (Can’t find the Power/Menu Button on your player? See The Basic Controls section on page 3.) WARNING: If the onscreen message says “Key Hold” and then shuts off, you need to locate the Hold Button on the left side of your player. Slide that button up to unlock your device. Then repeat Step 1 above. See The Basic Controls section on page 3 if you cannot find the Hold
Resumen del contenido incluido en la página 12
3. Press down once on the Play/Pause/Up Button to play the music files. Once your selected music has played, your player will play each music file, one after another. To pause the music, briefly press the Play/Pause/Up Button. 4. To change the volume of your music as it plays, scroll the Rotary Wheel in the top right corner of your player. Scrolling the rotary wheel clockwise increases the volume and scrolling the rotary wheel counter-clockwise decreases the volume. 5. To stop playing musi
Resumen del contenido incluido en la página 13
Use Your SD Slot to Add Memory Your SanDisk Sansa e100 Series Player includes an SD slot that lets you add up to 2GB of additional memory to your player. Follow these steps: 1. Locate the SD slot on the right side of your player below the Power/Menu Button. Remove the rubber cover to open the slot. Store the cover in a safe place. 2. Insert your SD card into the slot with the label side facing upwards. When your music player is plugged into your computer the SD card will appear as another
Resumen del contenido incluido en la página 14
Set Equalizer Playback The sound of a musical piece can be optimized to account for the musical style and for differences caused by instruments used within a piece of music. For example, some instruments sound best when the bass notes are emphasized. Follow these steps: 1. Put your player in Music mode. See Using the Music Controls on Page 9 if you need help with this step. 2. Briefly press the Power/Menu Button. The software Menu will appear onscreen. See The Basic Controls section on Pa
Resumen del contenido incluido en la página 15
2. Briefly press the Power/Menu Button. The software Menu will appear onscreen. See The Basic Controls section on page 3 if you cannot find the Power/Menu Button. 3. Press the Repeat/AB/Down Button to scroll to the Settings item. Press the Select Button to select Settings. 4. Press the Repeat/AB/Down Button to scroll to the SRS WOW item. Press the Select Button to select SRS WOW. A list of SRS choices will appear: WOW, FOCUS, TruBass, and SRS 3D. 5. Press the Repeat/AB/Down Button to scr
Resumen del contenido incluido en la página 16
Set Repeat Playback Mode Your player allows you to repeat all or part of a music or audio file. Follow these steps: 1. Put your player in Music mode. See Using the Music Controls on Page 9 if you need help with this step. 2. Briefly press the Power/Menu Button. The software Menu will appear onscreen. See The Basic Controls section on Page 3 if you cannot find the Power/Menu Button. 3. Press the Repeat/AB/Down Button to scroll to the Settings item. Press the Select Button to select Settin
Resumen del contenido incluido en la página 17
3 This chapter helps you get started listening to the FM radio with your SanDisk Sansa e100 Series MP3 Player. Listening to the FM Radio Your player has an FM radio that can play stations in most parts of the world. This chapter helps you to become familiar with its FM Radio features. Using the FM Radio Controls Your player has two modes of operation: Music and FM Radio. To listen to the radio, you need to be in FM Radio mode. Follow these steps: 1. Press the Power/Menu Button briefly
Resumen del contenido incluido en la página 18
Figure 4: The FM Radio LCD screen The control buttons and ports for your player are described in The Basic Controls section on Page 3. More detailed descriptions on how the controls work is included in the step-by-step instructions throughout this document. In addition, the Navigating the Software Menus chapter on Page 21 describes the onscreen menus that appear when you use these controls. Finding a Radio Station Once the FM Radio screen appears, you can listen to your FM radio and ch
Resumen del contenido incluido en la página 19
Accessing Preset Channels The FM radio in your player operates in either Normal mode, where all stations can be scanned, or Preset mode, where you save time by scanning only stations whose frequencies you have saved to memory. The Preset mode allows you to store up to 20 of your favorite radio stations in your player’s memory. Follow these steps to access the Preset Channel software menus to add, modify, and delete preset channels: 1. Put your player in FM Radio mode. See Using the FM Rad
Resumen del contenido incluido en la página 20
6. After you save a preset channel, you have two choices: Repeat steps 4 and 5 above to add more preset channels. Press the Power/Menu Button to exit the Add/Modify mode and return to the FM radio screen. Setting Preset Stations Automatically In addition to manually selecting radio station frequencies as preset stations, your player can automatically save all radio stations that have strong frequencies. Follow these steps; 1. Put your player in FM Radio mode. See Using the FM Radio Cont
