Resumen del contenido incluido en la página 1
3-867-834-12 (1)
Personal Audio
System
Operating Instructions
ZS-X7
©1999 Sony Corporation
Resumen del contenido incluido en la página 2
Information Warning For customers in the United States To prevent fire or shock hazard, do This equipment has been tested and found to not expose the player to rain or comply with the limits for a Class B digital moisture. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordan
Resumen del contenido incluido en la página 3
Basic Operations Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio The CD Player Setting Up 8 Using the display 22 Preparing the power sources 9 Locating a specific point in a 25 Using the shoulder strap track 26 Selecting the audio emphasis 10 Playing tracks repeatedly (SOUND/MEGA BASS) (Repeat Play) 11 Playing tracks in random order Additional Information (Shuffle Play) 27 Precautions 12 Creating your own program 29 Troubleshooting (Program Play) 31 Maintenance 14 Prev
Resumen del contenido incluido en la página 4
Basic Operations Playing a CD 1 2, 3, 4 5 Connect the supplied AC power adaptor (see page 23). 1 Press POWER to turn on the player. 2 Turn the lid of the CD compartment counterclockwise and open it. 3 Place the CD on the CD With the label side facing to you compartment until it clicks into place. 4 Basic Operations
Resumen del contenido incluido en la página 5
Basic Operations 4 Close the lid of the CD compartment and turn it clockwise until the z mark on the player and the z mark on the lid align. 5 Press u . The player plays all the tracks once. Track number Playing time Use these buttons for additional operations POWER u VOL –, + . , > x Tip To Do this You can change the adjust the volume Press VOL +, –. angle of your player. stop playback Press x. pause playback Press u. Press the button again to resume play after pause. go to the next track Press
Resumen del contenido incluido en la página 6
Listening to the radio 1 2 3 Connect the supplied AC power adaptor (see page 23). 1 Press POWER to turn on the player. 2 Press BAND until the band you Display want appears in the display. Indicates an FM stereo 3 Hold down TUNING•TIME SET broadcast + or – until the frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step by
Resumen del contenido incluido en la página 7
Basic Operations Use these buttons for additional operations POWER PLAY MODE MONO/ST VOL –, + Tips To Press • If the FM broadcast is adjust the volume VOL +, – noisy, press PLAY MODE•MONO/ST turn on/off the radio POWER until “Mono” appears in the display and the radio will play in To improve broadcast reception monaural. Reorient the antenna for FM. Reorient the player itself • You can change the for AM. angle of your player. for FM for AM Basic Operations 7
Resumen del contenido incluido en la página 8
The CD Player Using the display DISPLAY ENT MEM You can check information about the CD using the display. Checking the total track number and playing time Press DISPLAY•ENT MEM in stop mode. Total playing time Total track number Checking the remaining time Press DISPLAY•ENT MEM while playing a CD. To display Press DISPLAY•ENT MEM the current track number once and the remaining time on the current track* the number of tracks left twice and remaining time on the CD the current track number three t
Resumen del contenido incluido en la página 9
The CD Player Locating a specific ., > point in a track You can quickly find a specific point in a track while playing a CD. To locate Press a point while listening to > (forward) or . the sound (backward) while playing and hold down until you find the point a point while observing > (forward) or . the display (backward) in pause and hold down until you find the point The CD Player 9
Resumen del contenido incluido en la página 10
Playing tracks POWER PLAY MODEx. u , > repeatedly MONO/ST (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see pages 11 - 13). 1 Press POWER to turn on the player. 2 Press x. “Cd” appears in the display. 3 Proceed as follows. To repeat Do this a single track 1 Press PLAY MODE• MONO/ST until “REP 1” appears. 2 Press . or > to select the track that you want to repeat. 3 Press u. all the tracks 1 Press PLAY MODE• MONO/ST until “REP ALL” appears. 2 Press u. trac
Resumen del contenido incluido en la página 11
The CD Player Playing tracks in POWER PLAY MODE xu random order MONO/ST (Shuffle Play) You can play tracks in random order. 1 Press POWER to turn on the player. 2 Press x. “Cd” appears in the display. 3 Press PLAY MODE•MONO/ST until “SHUF” appears in the display. 4 Press u to start shuffle play. To cancel Shuffle Play Press PLAY MODE•MONO/ST until “SHUF” disappears from the display. The CD Player 11
Resumen del contenido incluido en la página 12
Creating your POWER DISPLAY PLAY MODE x own program ENT MEM MONO/ST (Program Play) u You can arrange the playing order of up to 20 tracks on a ., > CD. 1 Press POWER to turn on the player. 2 Press x. “Cd” appears in the display. 3 Press PLAY MODE•MONO/ST until “PGM” appears in the display. 4 Press . or > then press DISPLAY•ENT MEM for the tracks you want to program in the order you want. Programed track Playing order 5 Press u to start program play. 12 The CD Player
Resumen del contenido incluido en la página 13
The CD Player Tip To cancel Program Play You can play the same Press PLAY MODE•MONO/ST until “PGM” program again, since disappears from the display. the program is saved until you open the CD compartment. To check the order of tracks before play Press DISPLAY•ENT MEM. Every time you press the button, the track number appears in the programed order. To change the current program Press x once if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new
Resumen del contenido incluido en la página 14
Preventing sound POWER ESP x from skipping (ESP) The ESP (Electronic Shock Protection) function prevents the sound from skipping by using a buffer memory that stores music data for about 10 seconds. Notes 1 Press POWER. • Playing may stop when the player gets a strong 2 Press x. shock even with the “Cd” appears in the display. ESP function on. • You may hear a noise 3 Press ESP. or sound skip: The ESP indication appears in the display. – when you listen to a dirty or scratched CD. To cancel the
Resumen del contenido incluido en la página 15
The Radio The Radio Presetting radio POWER PRESET –, + DISPLAY TUNING stations ENT MEM TIME SET BAND –, + You can store radio stations into the player’s memory. You can preset up to 20 radio stations, 10 for each band in any order. 1 Press POWER to turn on the player. 2 Press BAND to select the band. 3 Tune in a station you want. 4 Hold down DISPLAY•ENT MEM for 2 seconds. 5 Press PRESET + or – until the preset number (1 to 10) you want for the station flashes. 6 Press DISPLAY•ENT MEM. The new st
Resumen del contenido incluido en la página 16
Playing preset POWER PRESET –, + radio stations BAND Once you've preset the stations, use PRESET + or – to tune in your favorite stations. 1 Press POWER to turn on the player. 2 Press BAND to select the band. 3 Press PRESET + or – to tune in the stored station. Preset number 16 The Radio
Resumen del contenido incluido en la página 17
The Timer The Timer Setting the clock DISPLAY TUNING ENT MEM TIME SET –, + “– –:– –” indication appears in the CLOCK display until you set the clock. Tip Before you set the clock, connect the power source (see The time display page 23). system: 12-hour system AM 12:00 = midnight 1 Press CLOCK for 2 seconds until the hour digit PM 12:00 = noon flashes. 2 Press TUNING•TIME SET + or – until you set the current hour. Then press DISPLAY•ENT MEM. The minute digits flash. Set the minutes by pressing TU
Resumen del contenido incluido en la página 18
Waking up to DISPLAY TUNING music ENT MEM TIME SET –, + You can wake up to music or a radio program at a preset time. Make sure you have set the clock (see “Setting TIMER the clock” on page 17). STANDBY Before you begin, make sure the (clock) indication is not lit in the display. If it is lit, press STANDBY. 1 Prepare the music source you want to play. To play Do this the radio Tune in a station a CD Insert a CD 2 Press TIMER. The (clock) and the music source (“Cd” or “RAdIO”) flash. 3 Select
Resumen del contenido incluido en la página 19
The Timer 5 Press TUNING•TIME SET + or – to set the volume, then press DISPLAY•ENT MEM. Tips 6 Press STANDBY. • To exit the standby The indication lights up and the power goes off. mode, press STANDBY to make disappear At the preset time, the power will go on, and the from the display. music will play. Then the power will go off 2 hours • The preset settings after the preset time, and the player will enter into remain until you reset the standby mode. them. To check/change when the playback wi
Resumen del contenido incluido en la página 20
Falling asleep to SLEEP music You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music. Tips 1 Play the music source you want. • You can fall asleep and wake up to different 2 Press SLEEP to display “SLEEP.” music. Set the waking 3 Press SLEEP to select the minutes until the player up timer first (see page goes off automatically. 18), turn on the power, and then set the Each time you press the sleeping timer.
