Resumen del contenido incluido en la página 1
Sony Corporation
Resumen del contenido incluido en la página 2
3-862-171-11(2) CD Radio Cassette-Corder EN EN Operating Instructions page 2 ES ES Manual de instrucciones página 2 CFD-W57 CFD-W57L 1998 by Sony Corporation
Resumen del contenido incluido en la página 3
About this manual Warning The instructions in this manual are for the To prevent fire or shock hazard, do CFD-W57 and CFD-W57L. Before you start not expose the player to rain or reading, check your model number. The moisture. CFD-W57L is the model used for illustration purpose. To avoid electrical shock, do not open Note the cabinet. Refer servicing to The name of the switch to turn on/off this qualified personnel only. player is indicated as below: “OPERATE”: European countries (excluding centr
Resumen del contenido incluido en la página 4
Basic Operations Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player Setting Up 12 Using the display 25 Choosing the power sources EN 13 Locating a specific track 28 Selecting the audio emphasis (Sound Mode/MEGA BASS) 14 Playing tracks repeatedly (Repeat Play) Additional Information 15 Playing tracks in random order (Shuffle Play) 29 Precautions 16 Creating your own program 31 Troubleshooting (Program Play) 33 Maintenan
Resumen del contenido incluido en la página 5
Basic Operations Playing a CD 1 2 Connect the supplied AC power cord (see page 25). 1 Press 6 OPEN/CLOSE (direct power-on) and place the CD on the CD tray. With the label side up 2 Press ^ . Display The CD tray closes and the player plays all the tracks once. Track number Playing time EN 4 Basic Operations
Resumen del contenido incluido en la página 6
Basic Operations Use these buttons for additional operations OPERATE ^ = , + (or POWER) VOL +, – p 6 OPEN/ CLOSE Tip To Press Next time you want to adjust the volume VOL +, – listen to a CD, just press ^ . The player turns on stop playback p automatically and starts playing the CD. pause playback ^ (P on the remote) Press the button again to resume play after pause. go to the next track + go back to the previous track = remove the CD 6 OPEN/CLOSE turn on/off the player OPERATE (or POWER, see pag
Resumen del contenido incluido en la página 7
Listening to the radio 12 Connect the supplied AC power cord (see page 25). Display 1 Press BAND until the band you want appears in the display (direct power-on). Indicates an FM stereo 2 Hold down TUNING/TIME SET broadcast + or – (TUNE + or – on the remote) until the frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step
Resumen del contenido incluido en la página 8
Basic Operations Use these buttons for additional operations OPERATE PLAY MODE VOL +, – (or POWER) MONO/ST ISS Tips To Press • If the FM broadcast is noisy, press PLAY adjust the volume VOL +, – MODE•MONO/ST ISS turn on/off the radio OPERATE (or POWER, until “Mono” appears in see page 2) the display and the radio will play in monaural. To improve broadcast reception • Next time you want to Reorient the antenna for FM. Reorient the player itself listen to the radio, just for AM or MW/LW. press BA
Resumen del contenido incluido en la página 9
Playing a tape 2 1 1 2 Connect the supplied AC power cord (see page 25). 1 Press p6 to open the tape With the side you want compartment and insert a to play facing upward recorded tape. Use TYPE I (normal) tape only. Close the compartment. 2 Press ( . Display The player turns on (direct power-on) and starts playing. EN 8 Basic Operations
Resumen del contenido incluido en la página 10
Basic Operations Use these buttons for additional operations 0 , ) 0 , ) p6 P p6 P VOL +, – OPERATE (or POWER) Note To Press During playback, do not adjust the volume VOL +, – press buttons on the other deck. Otherwise stop playback p6 the playback speed may change. fast-forward or rewind the tape ) or 0 pause playback P Tip Press the button again to Next time you want to resume play after pause. listen to a tape, just press ( . The player eject the cassette p6 turns on automatically turn on/off
Resumen del contenido incluido en la página 11
Recording on a tape 3 31 Connect the supplied AC power cord (see page 25). 1 Press p6 to open the tape With the side you want to compartment on deck B and record on facing upward insert a blank tape. Use TYPE I (normal) tape only. 2 Select the program source you want to record. Display To record from the CD player, insert a CD (see page 4) and press p on the CD section. To record from the radio, press BAND and tune in the station you want (see page 6). To record from the tape, insert a recorded
Resumen del contenido incluido en la página 12
Basic Operations 3 Deck B Start recording. To record from the CD player and the radio, press r on deck B (( is depressed automatically). Deck A To record from the tape, press P and ( on deck A. (For high speed dubbing, press P and HIGH SPEED DUBBING.) Then press r on deck B (( is depressed automatically). Deck B Tips Use these buttons for additional operations • Adjusting the volume or PLAY MODE OPERATE the audio emphasis (see p6 P MONO/ST ISS (or POWER) page 28) will not affect the recording le
Resumen del contenido incluido en la página 13
The CD Player Using the display DISPLAY ENTER MEMORY You can check information about the CD using the display. Checking the total track number and playing time Check the display in stop mode. If the CD has more than 12 tracks, “OVER 12” appears in the display. Total playing time Total track number Music calendar Checking the remaining time Press DISPLAY•ENTER MEMORY while playing a CD. The track numbers in the music calendar disappear after they are played. To display Press DISPLAY•ENTER MEMORY
Resumen del contenido incluido en la página 14
The CD Player Locating a specific track You can quickly locate any track using the number buttons. You can also find a Number specific point in a track while playing a buttons CD. = , + Note To locate Press You cannot locate a a specific track directly the number button of the specific track if track “SHUF” or “PGM” is lit in the display. Turn off a point while listening to + (forward) or = the indication by the sound (backward) while playing pressing p . and hold down until you find the point
Resumen del contenido incluido en la página 15
Playing tracks repeatedly (Repeat Play) Number You can play tracks repeatedly in buttons normal, shuffle or program play modes (see page 16). MODE p ( 1 Press p . “Cd” appears in the display. 2 Press MODE (PLAY MODE•MONO/ST ISS on the player) until the repeat mode you want appears in the display. To repeat Select a single track REP 1 all the tracks REP ALL tracks in random order SHUF REP programed tracks PGM REP 3 Do either of the following to start repeat play: • When you’ve selected REP1, sele
Resumen del contenido incluido en la página 16
The CD Player Playing tracks in random order (Shuffle Play) You can play tracks in random order. MODE p ( On the player 1 Press p . 1 Press p . “Cd” appears in the display. 2 Press PLAY MODE• MONO/ST ISS 2 Press MODE until “SHUF” appears in the display. repeatedly until “SHUF” appears in 3 Press ( to start shuffle play. the display. 3 Press ^ . To cancel Shuffle Play Press MODE until “SHUF” disappears from the display. EN The CD Player 15
Resumen del contenido incluido en la página 17
Creating your own program (Program Play) Number You can arrange the playing order of up buttons to 20 tracks on a CD. MODE p ( On the player 1 Press p . 1 Press p . “Cd” appears in the display. 2 Press PLAY MODE• MONO/ST ISS until 2 Press MODE until “PGM” appears in the display. “PGM” appears in the display. 3 Press the number buttons for the tracks you want 3 Press the = or to program in the order you want. + then press DISPLAY•ENTER MEMORY for the tracks you want to program in the order you wa
Resumen del contenido incluido en la página 18
The CD Player Tips To cancel Program Play • You can play the same Press MODE until “PGM” disappears from the program again, since display. the program is saved until you open the CD tray. To check the order of tracks before play • You can record your Press DISPLAY•ENTER MEMORY on the player. own program. After you’ve created the Every time you press the button, the track number program, insert a blank appears in the programed order. tape into deck B and press r to start recording. To change the
Resumen del contenido incluido en la página 19
Enjoying sound effects (LOOP/FLASH) You can repeat part of a CD (LOOP) and can “flash” the CD sound (FLASH) during playback. LOOP FLASH 1 Play a CD. 2 Press and hold LOOP or FLASH at the point you want to start the function. To Press and hold repeat a selected part of a CD LOOP “flash” the CD sound FLASH To cancel the LOOP or FLASH function Release the button. The player returns to normal play. EN 18 The CD Player
Resumen del contenido incluido en la página 20
The Radio The Radio Presetting radio stations You can store radio stations into the player’s memory. You can preset up to Number 30 radio stations (CFD-W57L) or 20 radio buttons stations (CFD-W57), 10 each for the band in any order. TUNE +, – BAND On the player 1 Press BAND until the band you want appears in 1 Press BAND to select the display. the band. 2 Set the frequency to the station you want. 2 Set the frequency to the station you want. 3 Hold down the number buttons that you want to 3 Hold
