Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
CRESTRON Contents Wireless Mouse 1 Description 1 Functional Description 1 Physical Description 2 Leading Specifications 3 Setup 4 General Use and Safety 4 RF Identity Code 4 Programming (Cresnet and SmarTouch systems) 9 Programming in SIMPL Windows (Cresnet and SmarTouch systems) 11 Accessing the Inlay Card 18 Problem Solving 20 Troubleshooting 20 Further Inquiries 21 Return and Warranty Policies 22 Merchandise Returns / Repair Service 22 CRESTRON Limited Warranty 22 Appendi
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
CRESTRON Wireless Mouse Description Functional Description The wireless mouse is a hand-held user interface that uses radio frequency (RF) to communicate with the CRESNET system, SmarTouch STS or the portable SmartPresenter system. As part of the CRESNET system, the wireless mouse communicates with the system via the CNRFGWA, RF receiver. As part of the SmarTouch STS, the wireless mouse communicates with the system via the ST-CP, control processor. When used with the SmartPresenter s
Resumen del contenido incluido en la página 6
CRESTRON CNWM/L used with SmartPresenter™ The wireless mouse serves as the RF transmitter for the SmartPresenter™ system. This is a unique presentation system that is fully operational using the wireless mouse. With only the compact SP-1 control processor and the wireless mouse, users can control up to four IR devices and one RS-232 device. SmartPresenter has the potential to control up to six functions per device. Functions are assigned to the four positions of the mouse button, th
Resumen del contenido incluido en la página 7
CRESTRON Battery Compartment (Rear View) Leading Specifications The table below provides a summary of leading specifications for the wireless mouse. Dimensions and weight are approximations rounded to the nearest thousandth unit. Leading Specifications of the Wireless Mouse SPECIFICATION DETAILS Battery 2 disposable "AAA" cells SIMPL™ Windows® Version 1.18 or later CRESNET Operating System 3.17.29 or later CNRFGWA Software version 2.00/PROM # 2251 SmarTouch (ST-CP) Operating 4.00.38
Resumen del contenido incluido en la página 8
CRESTRON NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarant
Resumen del contenido incluido en la página 9
CRESTRON digit hexadecimal number. To maintain code diversity within a system, use codes between 10 and FE for the transmitters. There are two methods to change the RF ID code on the wireless mouse: via the CNIDC (Identity Code Cable) and Viewport software or depressing buttons on the unit that represent a binary code. NOTES: The RF ID CODE on the wireless mouse is factory set to 30. Only use 10 through FE as RF ID code. Do not confuse RF ID with network (NET) ID. Match CNWM/L ID t
Resumen del contenido incluido en la página 10
CRESTRON Change RF ID Crestron Software (not required for SmartPresenter) Use the Crestron Performance ViewPort to set a RF ID CODE. Using either SIMPL Windows or VisionTools Pro, select ViewPort from the Tools menu; the “Crestron Performance Viewport” dialog box, shown below, appears. Crestron Performance Viewport Dialog Box From the Options menu in the dialog box, select Set Transmitter ID to open the “Set Transmitter ID” dialog box. Enter a two-digit hexadecimal number ranging
Resumen del contenido incluido en la página 11
CRESTRON The "Transmitter ID" dialog box is displayed. It prompts the user to properly position the CNIDC (IR probe). Connect the 9-pin DIN connector from the CNIDC to the proper COM port on the back of the PC. Position the wireless mouse button-side down so the battery compartment is accessible. Remove the battery compartment cover to expose the battery compartment. Place the LED probe from the CNIDC over the sensor (photo transistor), as shown below. The probe should rest between
Resumen del contenido incluido en la página 12
CRESTRON 2. Press and hold button 1 on the unit while replacing battery. 3. Replace battery compartment cover and release button 1. 4. Press/release button 2 (binary 0). 5. Press/release button 2. 6. Press/release button 4 (binary 1). 7. Press/release button 2. 8. Press/release button 2. 9. Press/release button 4. 10. Press/release button 2. 11. Press/release button 4. RF ID CODE Conversion Table HEX BINARY BUTTON (ALPHANUMERIC DIGIT) CODE PRESS/RELEASE 0 0000 2222 1 0001 2224 2
Resumen del contenido incluido en la página 13
CRESTRON 3. Release keypad button 4 and replace battery compartment cover. The keypad button 4 is assigned to the laser pointer. Disable Laser Pointer 1. Open battery compartment and remove one battery. 2. Press and hold keypad button 3 on the unit while replacing battery. 3. Release keypad button 3 and replace battery compartment cover. The laser pointer is disabled. NOTE: If no buttons are pressed while replacing the batteries, then the previous ID and laser pointer button assign
Resumen del contenido incluido en la página 14
CRESTRON The CNWM sample project has one page, shown below, and is designed to control predetermined PC mouse and keyboard operations and certain VCR and TV transport functions. If the particular devices in the custom system do not match those in the sample, alterations are necessary. Changes can be easily made by simply opening up certain dialog boxes and modifying some of the fields. For example, to access the functional properties of the button, simply right-click on the object and
Resumen del contenido incluido en la página 15
CRESTRON Open Page of "wireless mouse sample project.vtp" If you draw your own project, remember to change the target type to CNWM in the dialog box after selecting New and Project from the File menu. Programming in SIMPL Windows (Cresnet and SmarTouch systems) SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use programming language that is completely integrated and compatible with all Crestron system hardware. The objects that are used in SIMPL are called symbols.
Resumen del contenido incluido en la página 16
CRESTRON NOTE: The following SIMPL Windows sample programs are available on Crestron's ControlCD (v5.1 and later) or the Crestron website crestron.com. Search the SIMPL Windows Example Base for cnwm-ctl.smw and cnwm-prs.smw How the Program Works Two basic CNWM SIMPL Windows programs are shown in block diagram form. These two basic SIMPL programs (presentation system and wireless transmitter) are shown and described below. Example 1 - Presentation System This presentation system
Resumen del contenido incluido en la página 17
CRESTRON Example 2 - Wireless Transmitter This example shows a CNWM controlling a CRESTRON CPC-CAMI. The large mouse button on the wireless mouse is used to control pan by pressing it right or left. Tilt is controlled by pressing the same button either up or down. The four small keypad buttons are used to engage presets. The larger keypad button is used to issue the SAVE command that saves the last selected preset. Example 1: How to Create the Program Use the Configuration Manager
Resumen del contenido incluido en la página 18
CRESTRON Set CNRFGWA NET ID in SIMPL Windows’ Configuration Manager Add the CNMK to the program. Assign a NET ID of 28 as shown. Assign CNWM NET ID Use the Programming Manager workspace in SIMPL Windows to select symbols and assign their respective signals. For these examples, a CNRFGWA and CNMK symbols were added automatically when the devices were added to the system in the Configuration Manager workspace. Expand the Network Modules folder and double click on the CNRFGWA to ex
Resumen del contenido incluido en la página 19
CRESTRON Graphical Detail View of the CNWM (Mouse) in SIMPL Windows’ Programming Manager Double click on the CNMK () to display in Detail View (alternatively CTRL+D). Assign signals as shown. Graphical Detail View of the CNMK (Mouse/Keyboard Wedge) in SIMPL Windows’ Programming Manager Add the SERIAL SEND symbols to this program by selecting them from the Symbol Library. View the symbol in Detail View (alternatively CTRL+D or drag and drop into Detail View). Assign signals as
Resumen del contenido incluido en la página 20
CRESTRON Graphical Detail View of SERIAL SEND (signals S-1 through S-4) in SIMPL Windows’ Programming Manager Example 2: How to Create the Program Use the Configuration Manager workspace in SIMPL Windows to select and configure all the devices that need to be included into the system. For Example #2 add a CPC-CAMI to the system. For this example, the NET ID for this device is 03. Set CPC-CAMI NET ID in SIMPL Windows’ Configuration Manager Add the CNRFGWA to the program. Assign
