Resumen del contenido incluido en la página 1
*LJDVHW
s
3070/75
LVGQ
Published by
Information and Communication Mobile Group
Hofmannstr. 51
D-81359 München
© Siemens AG 2001
All rights reserved. Subject to availability.
Right of modification reserved.
Printed in Germany (01/01).
Siemens Aktiengesellschaft
http://www.siemens.com/gigaset
User Guide
Order. no.: A31008-G3070-B100-3-7619
!
and Safety Precautions
Resumen del contenido incluido en la página 2
Sicherheitshinweise 09.01.01 Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Safety precautions Step Safety precautions by Step l Install only in covered areas with a temperature range of +5°C to +45°C. l Do not install in bathrooms or shower rooms. l Sensitive electronic equipment may be affected. l When disposing of the base station, the relevant environmental protection guidelines must be observed. l This Gigaset device should only be passed on to third parties complete with the operating in
Resumen del contenido incluido en la página 3
Übersicht_U3.fm 09.01.01 Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Brief overview - Gigaset 3000 Comfort handset The display is protected by a plastic film. £ This protective film should be removed before use. Base name Battery level – Constant: ready to 7 full dial/receive call empty – Flashing: no contact with base station Softkeys End call key See below 8 –End call 2QcU! – Abort function M, +[ – Handset on/off: Activate menu Long press Speakerphone Directory Talk key Call up – Acce
Resumen del contenido incluido en la página 4
Übersicht_U3.fm 09.01.01 Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Softkeys and symbols of the Gigaset 3000 Comfort and Gigaset 3000 Classic Softkeys Symbols - Make an internal call Battery run down + warning + µ tone -Hold call Open redial list Battery charged to 1/3. [ Flashes during the charg- ing process. 1. This symbol appears if Battery charged to 2/3. , the missed calls list con- Flashes during the charg- tains new messages or ing process. entries. 2. Press the softkey to ca
Resumen del contenido incluido en la página 5
giga3070IVZ.fm 09.01.01 Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Contents Contents Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . II Brief overview - Gigaset 3000 Comfort handset . . . . . . . . . . . . . 3 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting the base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting sup
Resumen del contenido incluido en la página 6
giga3070IVZ.fm 09.01.01 Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Contents System settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Configuring music-on-hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Entering long-distance codes . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Restoring the factory setting . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 7
giga3070IVZ.fm 09.01.01 Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Contents Recording memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Listening to messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Listening to memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Deleting messages and memos . . . . . . . . . . . . . . . . . . . . . . . . 45 Modifying settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 8
giga3070IVZ.fm 09.01.01 Gigaset 3070isdn, GB, A31008-G3070-B100-3-7619 Contents Menu Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Comfort handset menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 4
Resumen del contenido incluido en la página 9
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Getting started Step Getting started by Step Connecting the base station 21 22 4. 1. 5. 3. 2. 1. V socket: insert in the ISDN connection cable until the plug locks into place. 2. Insert in the ISDN connection cable in the ISDN socket until the plug locks into place. 3. In the case of NTBA with self-assembly, insert the cable between the NTBA and the TAE (old telephone socket) until both plugs lock into place. 4. socket
Resumen del contenido incluido en la página 10
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Getting started Step Connecting supplementary devices by Step Connection for the 21 corded terminal with the internal number 21 22 Connection for the corded terminal with the internal number 22 The connections are de- signed for use with most commercial terminals. Schematic diagram Registering handsets Press this green illuminated key Registering the new Gigaset 3000 Comfort handset 1. Switch on the handset with a lon
Resumen del contenido incluido en la página 11
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Getting started Registering the Gigaset 3000 Classic handset Step by 1. Switch on the handset with a long press on the¯key. Step 2. Press ® x { in sequence. 3. Enter the base station number, generally 1, and confirm with 1. The symbol initially flashes, but then remains steadily lit when the connec- tion to the base station has been established. Enter the base station PIN (factory setting: 0000) and confirm with [O
Resumen del contenido incluido en la página 12
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station Step Connecting a PC by Step to the base station Gigaset talk&surf is a driver software which prepares your PC for Internet ac- cess via Gigaset 3070/75isdn. More information is contained on the CD provid- ed with the program. Gigaset talk&surf requires Windows 98 or higher as its operating system. You may be required to make certain settings in the Control Panel of the operating sy
Resumen del contenido incluido en la página 13
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station Under Diagnosis you can view the driver assignment to the COM port. Step by Step 9
Resumen del contenido incluido en la página 14
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station Via the "General" tab and Properties, you can view the default settings for the Step COM port. by Step USB function To connect a PC via the USB interface, you will need Windows 98 or later or Windows ME. Windows 95 and Windows NT 4.0 do not support USB. 10
Resumen del contenido incluido en la página 15
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station Step Representation of file names in Windows Explorer by In Explorer you can define the format for displaying files under Step > View > Options. In these operating instructions it is assumed that a full path name is used, i.e. with a different configuration, the extension after the dot is not included: update.exe becomes update. 11
Resumen del contenido incluido en la página 16
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station Step Updating Gigaset 3070/3075isdn by This section tells you how to download a new version of the firmware for your Step Gigaset 3070/75isdn from the Internet and then how to install it in the base sta- tion. You can use this function to install new features on your base station as soon as they become available in the Internet. Downloading software files from the Siemens Server The
Resumen del contenido incluido en la página 17
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station Step Assigning the COM ports to the devices by A PC is equipped with a number of different ports to enable it to communicate Step with other devices. The most common ports are the following: The USB port COM 1 - 2, on the hardware side COM 3 - etc. virtual, i.e. only on the software side The port layout is described briefly below: Since there are three different ways in which the conn
Resumen del contenido incluido en la página 18
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station Operating Gigaset talk&surf with Windows 98, Win ME Step by Registering Gigaset M105 Data at Gigaset 3070/3075isdn Step Proceed as follows: 1. Install Gigaset M105 Data 2. Start the Gigaset M105 Data configuration program via > Start > Programs >Gigaset M100 Data >Gigaset Setup. 3. Select the window "Local adapter“ , a free registration location is selected. 4. Check that your Gigaset
Resumen del contenido incluido en la página 19
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station * You can find out which is the virtual COM port for Gigaset M105 Data either by starting Step the program Gigaset Setup and view the COM port in the Connection tab. (It may take by a few seconds for this to be displayed correctly) or you could select > Start > Settings Step > Control Panel > System, then click on the Device Manager tab and select the ports there (COM and LPT). A l
Resumen del contenido incluido en la página 20
giga3070KAP.fm 09.01.01 Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 Connecting a PC to the base station Updating Gigaset M101 Data for operation with Gigaset 3070/3075 Step by Before you begin, make sure Gigaset M101 is already connected to the PC, Step the configuration program is loaded, and the COM port is set correctly. The firmware version must be ‡ 2.048. This software can be downloaded from http://www.ic.siemens.com/mySiemens/full/. Start the firmware update in the dialog whic
