Resumen del contenido incluido en la página 1
NetComm RoadsteR seRies
56K USB Modem
User Guide
Resumen del contenido incluido en la página 2
Preface t his manual provides information related to the installation, operation, and application of this device. t he individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts. If you find the product to be broken or malfunctioning, please contact technical support for immediate service by email at technicalsupport@netcomm.com.au For product update, new product release, manual revision, or software upgrades, please visit our webs
Resumen del contenido incluido en la página 3
INTRODUCTION Please allow me to introduce myself
Resumen del contenido incluido en la página 4
introduction The AM5067 - 56Kbps Voice/Fax/Data USB Modem connects your computer to the Internet, all kinds of BBS, and other fax modems. This manual describes the features, and at Commands USB Telephone (Optional) Features & Specifications: General Description • aGeRe olympia sV9U / 1�� chipset solution • UsB bus powered/ system powered • UsB 1.1 • UsB . � supported with Windows XP/ Windows ���/ Windows ��3 server/Vista/�. • Works with Windows 98, 2000, ME, XP, 2003, Vista, 7 operating
Resumen del contenido incluido en la página 5
NetComm Roadster Series 56K USB Modem • TIA/EIA 578 Class 1 FAX send and receive speeds of 14400, 12000, 9600, 7200, 4800 or 2400bps. VOICE/ Audio Mode • TAM through the microphone / speaker interface on Audio Sound card ERROR Correction • support V. �amP, mNP - DATA Compression • support V.,V.bis and mNP 5 DAA Line interface Capabilities • DTMF Tone Dial/ accurate make-break ratio Pulse Dial • Proprietary transformer-based isolation barrier • Programmable even detect for Caller-id rec
Resumen del contenido incluido en la página 6
Hardware setup This chapter contains detailed instructions on how to install and configure the 56Kbps USB modem, as well as how to verify if your installation is correct. We recommend that you follow the steps accordingly to avoid future problems. Installing the 56Kbps USB Modem 1. t urn off your PC and unplug the aC power supply from the system. . Please connect the UsB modem and PC with UsB cable. 3. Please connect the 56Kbps UsB modem to the telephone line and telephone set, as per the f
Resumen del contenido incluido en la página 7
NetComm Roadster Series 56K USB Modem Configure the Modem on Win9X/WinME/Win2000/WinXP/Vista/7 1. Please turn on your computer. 2. As Windows 98SE/2000/ME/XP/Vista/7 starts, it will detect a new hardware has been plugged in or added, and it will start the “Add New Hardware Wizard”. Click on Cancel. 3. Please insert the UsB 56Kbps modem Utility Cd into your Cd-Rom driver. 4. The CD should auto-start, displaying the following windows. If it does not start properly, please click on Start – Run an
Resumen del contenido incluido en la página 8
COMMANDS This is where you take control
Resumen del contenido incluido en la página 9
NetComm Roadster Series 56K USB Modem Commands most people use the communication software programs to tell modems what to do. therefore, you may not use the commands in this chapter. However, if you prefer to communicate with your modem directly, you can type the commands described below. Here describes how to work in the terminal mode. Typing Commands • Use the BACKSPACE key to delete typing errors. • Every command (except A/ and +++) must begin with the AT or at prefix and be entered by p
Resumen del contenido incluido en la página 10
B—Communication Standard Setting Use this command to select the communication standard used by the soft modem. Result codes: _ OK if = 0—3, 15, 16. _ ERROR if 0—3, 15, 16. Command Function B0 selects CCitt V. mode when the modem is at 1�� bits/s. B1 Selects Bell 212A when the modem is at 1200 bits/s (default). B2 Deselects V.23 reverse channel (same as B3). B3 Deselects V.23 reverse channel (same as B2). B15 selects V.1 when the modem is at 3�� bits/s. B16 Selects B
Resumen del contenido incluido en la página 11
NetComm Roadster Series 56K USB Modem H—Hook Control Instructs the modem to go on-hook to disconnect a call or go off-hook to make the telephone line busy. Result codes: _ OK if = 0—1. _ ERROR if 0—1. Command Function H0 The modem goes on-hook (default). H1 The modem goes off-hook. M—Speaker Control Use this command to turn the speaker on and off. Result codes: _ OK if = 0—3. _ ERROR if 0—3. Command Function M0 Speaker is off. M1 Speaker is on
Resumen del contenido incluido en la página 12
P - Select Pulse Dialing Use this command to configure the modem for pulse dialing. All subsequent D commands use pulse dialing until either the T command or a tone dial modifier is received by the modem. Tone dialing is the default setting. this command does not use parameters and generates an eRRoR result code when parameters are attached to the command. Q - Result Code Control Result codes are informational messages sent from the modem and displayed on the monitor. Basic
Resumen del contenido incluido en la página 13
TROUBLESHOOTING Just in case you ever have to use this
Resumen del contenido incluido en la página 14
t roubleshooting This appendix contains information that will help you to solve some of the common problems you might encounter, while using this 56Kbps UsB modem. Modem does not respond to AT commands • There may be a COM port/IRQ conflict. Reconfigure the modem COM port address and IRQ line. • Make sure that you have set the correct COM port and IRQ in the communications software. • Make sure the system is in Terminal mode of your communications software. Modem cannot dial and “NO DIALTO
Resumen del contenido incluido en la página 15
Appendix i thought i had that removed
Resumen del contenido incluido en la página 16
Appendix A: Cable Connections This cable information is provided for your reference only. Please ensure you only connect the appropriate cable into the correct socket on either this product or your computer. If you are unsure about which cable to use or which socket to connect it to, please refer to the hardware installation section in this manual. if you are still not sure about cable connections, please contact a professional computer technician or NetComm for further advice. RJ11 connector
Resumen del contenido incluido en la página 17
NetComm Roadster Series 56K USB Modem Appendix B: Registering your NetComm Product All NetComm Limited (“NetComm”) products have a standard 12 month warranty from date of purchase against defects in manufacturing and that the products will operate in accordance with the specifications outlined in the User Guide. However some products have an extended warranty option (please refer to packaging). To be eligible for the extended warranty you must supply the requested warranty information to Net
Resumen del contenido incluido en la página 18
Federal Communication Commission interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communic
Resumen del contenido incluido en la página 19
NetComm Roadster Series 56K USB Modem �imitations of Warranty The Trade Practices Act 1974 and corresponding State and Territory Fair Trading Acts or legalisation of another Government (“the relevant acts”) in certain circumstances imply mandatory conditions and warranties which cannot be excluded. This warranty is in addition to and not in replacement for such conditions and warranties. To the extent permitted by the Relevant Acts, in relation to your product and any other materials provided
Resumen del contenido incluido en la página 20
NETCOMM LIMITED Head Office DYNALINK NZ 12c Te Kea place, Albany, Auckland, New Zealand PO Box 1200, Lane Cove NSW 2066 Australia P: 09 448 5548 P: � 9 ��� F: � 9 �1� F: 09 448 5549 E: int.sales@netcomm.com.au E: sales@dynalink.co.nz W: www.netcommlimited.com. W: www.dynalink.co.nz Product Warranty NetComm products have a standard 12 months warranty from date of purchase. However some products have an extended warranty option, via registering your product online at the
