Resumen del contenido incluido en la página 1
Instruction Manual
Resumen del contenido incluido en la página 2
Table of Contents SECTION PAGE # SECTION 1: IMPORTANT SAFEGUARDS 1 SECTION 2: UNPACKING 3 SECTION 3: TOTAL BLENDER OVERVIEW 4 SECTION 4: INSTALLATION 4 SECTION 5: CARE AND CLEANING 6 SECTION 6: OPERATIONAL OVERVIEW 7 SECTION 7: TROUBLESHOOTING 8 SECTION 8: WARRANTY 10
Resumen del contenido incluido en la página 3
SECTION 1 IMPORTANT INFORMATION Read all instructions carefully before using your TOTAL BLENDER™ 1.1 SAFETY CERTIFICATION The blender is certified by ETL (Report No. 3018204- 4, 3018204-2 & 3018204-3). 1.2 TOTAL BLENDER CERTIFICATION TOTAL BLENDER and its accessories are certified by R NSF International (NSF), under the letter K (for K-TEC) in the NSF Official Listing. 1.3 AVOID CONTACT WITH MOVING PARTS • Keep fingers, hands, hair and clothing away from all moving parts. • Keep all u
Resumen del contenido incluido en la página 4
1.8 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD SECTION 2 BY BLENDTEC The use of any unauthorized attachments may cause fire, electric shock, and/or SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE injury and will void the warranty. USE. 1.9 CONTAINER MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS 2.1 UNPACKING YOUR BLENDER OPERATING You should have received the following items: • TOTAL BLENDERTM motor base 1.10 BLADES ARE SHARP! HANDLE CAREFULLY! • Blender ja
Resumen del contenido incluido en la página 5
SECTION 3 TOTAL BLENDER OVERVIEW (Refer to Figures 1 and 2) 3.1 BLENDER MOTOR • Motor Cover: Houses the power unit in a durable, easy-to-clean polycarbonate. • Touch Pad: Consists of six buttons that contain pre-programmed settings for selective blender control, a pulse button, and two speed control buttons. • LCD Information Center: will indicate status of unit as well as overload or over-temperature conditions. • Power Unit: This unit is located within the blender motor and contains the
Resumen del contenido incluido en la página 6
SECTION 5 SECTION 6 CARE AND CLEANING OPERATIONAL OVERVIEW 5.1 AFTER USE CLEANING 6.1 MAIN POINTS OF OPERATION 1. Add 1 cup of hot water and a drop of liquid dishwashing soap to the blender 1. Turn on the main power switch located on the back of the blender motor in jar. the lower right corner. 2. Place the lid tightly onto the jar. Place the blender jar on the blender base, 2. Place the blender jar on the base, making sure the jar is secure. Attach the and with your hand placed on top o
Resumen del contenido incluido en la página 7
7.3 BLENDED TEXTURE UNSATISFACTORY SECTION 7 If the blended texture of product is lumpy or uneven, do the following: TROUBLESHOOTING • Ensure the mixture is not cavitating during the cycle. Cavitation is a condi- tion in which the blender blade spins freely in an air pocket within the drink 7.1 BLENDER MOTOR WILL NOT TURN ON mix because the mix is too cold or too solid. This problem can be corrected If the blender motor will not turn on, try the following: by increasing the mix tempera
Resumen del contenido incluido en la página 8
SECTION 8 UNDER WARRANTY WARRANTY 1. Contact Blendtec immediately to diagnose the difficulty. Please have blender serial number ready as well as a description of the problem. Do not attempt to WARRANTY DESCRIPTION (US Domestic and Canada) do your own repairs. Repairs made by persons other than Blendtec authorized service representatives will void the warranty. Many issues can be resolved Your Blendtec Total Blender motor is warrented for 3 years or 10,000 cycles, simply and quickly ove
Resumen del contenido incluido en la página 9
1206 South 1680 West Orem, UT 84058 801-222-0888 blendtechome.com 21-801-03 Blendtec Home Total Blender Manual Rev. 02 June 2006 ©2006 K-TEC, Inc., All Rights Reserved Blendtec is a registered trademark of K-TEC, Inc.
