Resumen del contenido incluido en la página 1
Stand Mixer
Instruction Booklet Livret d’instructions
BEM800XL
BEM800XL_IB_v10.indd 1 19/11/09 3:16 PM
Resumen del contenido incluido en la página 2
CONGRATULATIONS On the purchase of your new Breville Stand Mixer 2 BEM800XL_IB_v10.indd 2 19/11/09 3:16 PM
Resumen del contenido incluido en la página 3
CONTENTS 4 Breville recommends safety first 7 Know your Breville Stand Mixer 11 - Using the Scraper Beater 12 Before first use of your Breville Stand Mixer 13 - Before using you Mixer for the first time 13 - Attaching the Mixing Bowl 13 - Removing the Mixing Bowl 14 - Attaching the Scraper Beater, Flat Beater, Wire Whip or Dough Hook 14 - Removing the Scraper Beater, Flat Beater, Wire Whip or Dough Hook 15 - Attaching the Pouring Shield 15 - Removing the Pouring Shield 16 Ope
Resumen del contenido incluido en la página 4
BREVILLE RECOMMENDS SAFETY FIRST At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. IMpORTANT SAFEGUARDS When using electrical appliances, basic to the 'OFF' position before unplugging safety precautions should always be the power plug from the wall outlet. followed including: • Always ensure the Speed Control Dial is in the 'OFF' position and remove READ ALL INSTRUCTIONS the power plug from
Resumen del contenido incluido en la página 5
BREVILLE RECOMMENDS SAFETY FIRST beater, wire whip or dough hook have described in this booklet. Do not use completely stopped. Ensure the Speed outdoors. Do not use in moving vehicles Control Dial is in the 'OFF' position and or boats. remove the power plug from the wall • Fully unwind the power cord before use. outlet before unlocking the mixer head and moving into the open (vertical) • Do not let the power cord hang over position. The scraper beater, flat beater, the edge of a bench
Resumen del contenido incluido en la página 6
BREVILLE RECOMMENDS SAFETY FIRST • If the power outlet is a standard BREVILLE ASSIST™ pLUG 2-prong wall outlet, it is your personal Your Breville appliance comes with a responsibility and obligation to have unique Assist™ Plug, conveniently it replaced with a properly grounded designed with a finger hole in the power 3-prong wall outlet. plug for easy and safe removal from • Do not, under any circumstances, cut or the wall outlet. For safety reasons it is remove the third (ground) p
Resumen del contenido incluido en la página 7
KNOW Your Breville Stand Mixer 7 BEM800XL_IB_v10.indd 7 19/11/09 3:16 PM
Resumen del contenido incluido en la página 8
KNOW YOUR BREVILLE STAND MIXER C D A H E I F B G J C C A 'Tilt-Release' Button: F 12 Speed Control Dial: Releases the mixer head into the open 'Pause' function temporarily stops the 'Tilt-Back' position for easy removal and mixer and pauses the timer. addition of ingredients, attachments and G LCD screen with 10 Minute Timer: mixing bowl. Set the timer to count-up to record B Internal Cord Storage: mixing time, or count-down according Located in the rear of the mixer. to a specified re
Resumen del contenido incluido en la página 9
KNOW YOUR BREVILLE STAND MIXER Scraper Beater for creaming butter & sugar, mixing sticky ingredients or folding whipped egg whites into mixtures: - Frosting, icing, gum paste NOTE: - Cheesecakes Do not use the Scraper Beater - Compound butters for mixing heavy - Pie fillings batters, doughs, whisking egg - Creaming mascarpone whites or whipping cheese, cream cheese, potatoes. sour cream - Sticky cake & cookie batters Flat Beater for normal to heavy mixtures: - Pie pastry - Mashed po
Resumen del contenido incluido en la página 10
KNOW YOUR BREVILLE STAND MIXER Scrapes the Bowl So you don’t have to Under-mixed batters produce poorly baked results, including collapsing, unevenness of crumb, holes, low rising, streaking and coarse textures. The flexible edge of the Scraper Beater continuously folds and scrapes the sides & bottom of the bowl, including the dimple at the bottom, for exceptionally thorough mixing. It virtually eliminates the need for hand scraping with a spatula, cutting mixing time by up to 6
Resumen del contenido incluido en la página 11
KNOW YOUR BREVILLE STAND MIXER USING THE SCRApER BEATER The Scraper Beater can be used for a variety of mixing tasks. Due to the efficient mixing action of the Scraper Beater, the mixing time of many recipes will be reduced. Refer to the chart below for approximate mixing times. These are a guide only. Longer mixing times may be required for larger or double quantities. Mixture Mixing Task Approx. Mixing Time Butter & Sugar Creaming 3-4 minutes (or until mixture is light and creamy) Crumbl
Resumen del contenido incluido en la página 12
BEFORE FIRST USE Of your Breville Stand Mixer 12 BEM800XL_IB_v10.indd 12 19/11/09 3:16 PM
Resumen del contenido incluido en la página 13
BEFORE FIRST USE Before using your Mixer for the 2. Press the ‘Tilt-Release’ button and first time simultaneously use the Lift Assist Handle to raise the mixer head until it locks into 1. Place the Mixer on a level, dry surface the open position. such as a bench top. 3. Turn the mixing bowl counter-clockwise 2. Ensure the power cord is unplugged to release from the Bowl Locking Recess. and the Speed Control Dial is in the 'OFF' position. 'TILT-RELEASE' BUTTON 3. Remove any packagi
Resumen del contenido incluido en la página 14
BEFORE FIRST USE Attaching the Scraper Beater, Flat Removing the Scraper Beater, Flat Beater, Wire Whip or Dough Hook Beater, Wire Whip or Dough Hook 1. Ensure the power cord is unplugged 1. Ensure the power cord is unplugged and the Speed Control Dial is in the and the Speed Control Dial is in the 'OFF' position. 'OFF' position. 2. Press the 'Tilt-Release' button and 2. Press the 'Tilt-Release' button and simultaneously use the Lift Assist simultaneously use the Lift Assist Handle to
Resumen del contenido incluido en la página 15
BEFORE FIRST USE Attaching the pouring Shield 1. Ensure the power cord is unplugged and the Speed Control Dial is in the 'OFF' position. 2. Attach the mixing bowl and either the scraper beater, flat beater, wire whip or dough hook. 3. Press the 'Tilt-Release' button and simultaneously use the Lift Assist Handle to lower the mixer head until it locks into the closed position. 4. Slide the main ring into position on top of the mixing bowl then attach the pour spout. Removing the pour
Resumen del contenido incluido en la página 16
OpERATING Your Breville Stand Mixer 16 BEM800XL_IB_v10.indd 16 19/11/09 3:16 PM
Resumen del contenido incluido en la página 17
OpERATING THE MIXER The Breville Stand Mixer features 5. Rotate the Speed Control Dial Planetary Mixing Action, a similar mixing clockwise. Always begin mixing on the action used by commercial mixers in lowest speed then gradually increase bakeries and patisseries for 360 degree to the desired higher speed to prevent beater-to-bowl coverage. This is achieved ingredients spattering. by the counter-clockwise motion of the The LED Speed Indicator is conveniently mixer head combined with the
Resumen del contenido incluido en la página 18
LOREM IpSUM DOLOR SIT AMET CONSECTETUER ELIT. ADDITIONAL FEATURES Of your Breville Stand Mixer 18 BEM800XL_IB_v10.indd 18 19/11/09 3:16 PM
Resumen del contenido incluido en la página 19
ADDITIONAL FEATURES The count-up timer To set the count-down timer, press the up or down arrows until the desired mixing The count-up timer is especially useful time is displayed on the LCD screen. to gauge mixing time or when a recipe Rotate the Speed Control Dial clockwise does not specify the mixing time. You can to select the desired speed and to begin monitor the time it takes to thoroughly mix mixing. Once the Mixer automatically turns the ingredients, so that the next time you
Resumen del contenido incluido en la página 20
ADDITIONAL FEATURES pause mode If this error occurs, turn the Speed Control Dial to the 'OFF' position and remove the At any stage during mixing, whether power plug from the wall outlet. Wait at you are using the count-up or count-down least 15 minutes before restarting the Mixer. timer, you can rotate the Speed Control Dial to the 'PAUSE' position. This will turn the Electronic cut-off (current overload) Mixer off and pause the timer. This enables you to assess the mixing progress or a
