Resumen del contenido incluido en la página 1
Owner's Manual
Contents
Model Identification ............................2
PRECAUTIONS TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE
Commercial Microwave Oven
MICROWAVE ENERGY .................... 3
IMPORTANT SAFETY INSTRUCTIONS ..... 3
Grounding/Earthing Instructions .........5
Installation .........................................5
Keep these instructions for future reference.
Display and Features .........................6
If the oven changes ownership, this manual
Using the Oven Control
must accom
Resumen del contenido incluido en la página 2
Model Identification When contacting Amana, provide product information. Any questions or to locate an authorized Amana servicer, Product information is located on oven serial plate. call toll free 1-866-426-2621 inside the U.S.A or Canada, Record the following information: or 1-319-622-5511 outside the U.S.A or Canada. Warranty service must be performed by an authorized Amana Model Number: ____________________________ servicer. Amana also recommends contacting an Manufacturing Number: _________
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS Recognize this symbol as a SAFETY message WARNING ! When using electrical equipment, basic safety precautions should be followed to reduce the risk of burns, electrical shock, fire, or injury to persons. 1. READ all instructions before using equipment. 9. DO NOT heat baby bottles in oven. 2. READ AND FOLLOW the specific 10. Baby food jars shall be open when heated and “PRECAUTIONS TO AVOID POSSIBLE contents stirred or shaken before consumption, in EXPOSURE TO
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS WARNING WARNING ! ! Liquids such as water, coffee, or tea are able to be To avoid risk of fire in the oven cavity: overheated beyond the boiling point without appearing a. DO NOT overcook food. Carefully attend oven to be boiling due to surface tension of the liquid. when paper, plastic, or other combustible Visible bubbling or boiling when the container is materials are placed inside the oven to facilitate removed from the microwave oven is not always cooking. pres
Resumen del contenido incluido en la página 5
Installation Unpacking Oven WARNING ! Inspect oven for damage such as dents in door or inside oven cavity. To avoid risk of electrical shock or Report any dents or breakage to source of purchase immediately. death, this oven must be earthed. Do not attempt to use oven if damaged. Remove all materials from oven interior. If oven has been stored in extremely cold area, wait a few hours before connecting power. WARNING ! To avoid risk of electrical shock Radio Interference or death, do not
Resumen del contenido incluido en la página 6
Display and Features (some models) STOP/RESET Pad STOP/RESET The STOP/RESET pad stops a cooking sequence in progress and must be pressed again to clear out any remaining cooking time. START/+30 SEC START/+30 SEC When the STOP/RESET pad is used to end a programming change, the Pad changes are discarded. The START/+30 SEC pad is used to begin a cooking cycle and to increase the reheat time in 30 second 7 17 Single Pad Programming increments. This feature enables each numbered pad to be programmed
Resumen del contenido incluido en la página 7
Display and Features (some models) If These Features are CHECK Check Program Pad PROGRAM Different from Yours This feature allows you to check the programmed cooking time These features are intended and power level of any programmed pad. to show the variety that is 1. Press CHECK PROGRAM pad. available in the product line. If your CHECK displays. microwave does not have all the 2. Press desired numeric pad. options that are shown, it is not a PROG--XX displays (XX indicates program number).
Resumen del contenido incluido en la página 8
Display and Features (some models) Cooking Display DISPLAYS DESCRIPTION Displays when oven control will accept entries. : 0 Displays cooking time. If stage cooking is 60:00 programmed, total cooking time is displayed. Displays when the QTY2X pad is pressed. DOUBLE Display Some items in the display can be 100% seen but are not available depending 80% These settings display the current microwave power on the model. During normal level used. 60% operation of oven, not all items will
Resumen del contenido incluido en la página 9
Using Electronic Oven Control (some models only) Interrupting Manual Time Entry STOP/RESET Operation To cook food using a specific entered time and power level. Open oven door or press STOP/RESET pad to interrupt operation. Display continues to NOTE: To use Time Entry, you must press POWER LEVEL Pad first. show countdown time. Close door and press START/+30 SEC pad to resume oven 1. Open oven door and place food in oven. Close door. operation. :0 displays. Light will turn on. 2. Press POWER LE
Resumen del contenido incluido en la página 10
Programming Electronic Oven Control (some models only) Programming Pads Oven is shipped from factory with pads 1-10 preprogramed. To re-program The display pads 1-10 or program pads 11-19, use the following procedures. PROGRAM PROGRAM shows PROGRAM PROGRAM PROGRAM. 1. Door can be in either open or closed position with :0 showing in display. 2. Press PROGRAM pad. When PROGRAM pad is PROGRAM appears in display. PROGRAM pressed, the display will show 3. Press desired number pad to be programmed.
Resumen del contenido incluido en la página 11
Dial Operation (some models only) Dial option is available on some models only. A Oven Clearances A—Allow at least 4" (10.2 cm) of clearance around top and sides of oven. B Proper air flow around oven cools electrical components. With restricted air flow, oven may not operate properly and life of electrical parts is reduced. B—Allow at least 4" (10.2 cm) between air discharge on back of oven and back wall. No metal pans DO NOT power spray Heating 1. Open oven door, place food in oven, and close
Resumen del contenido incluido en la página 12
Care and Cleaning PART CARE AND CLEANING RECOMMENDATION Clean microwave oven with mild detergent in warm water using soft sponge or cloth. Wring sponge or cloth to remove excess water before wiping equipment. If desired, boil a cup of water in microwave oven to loosen soil before cleaning. Important: Interior, Exterior, and Door Do not use abrasive cleansers or cleaners containing ammonia or citrus. These could damage finish. Never pour water into microwave oven bottom. Do not
