Resumen del contenido incluido en la página 1
Model: 11-8321
LIT. #: 98-0333/11-03
Resumen del contenido incluido en la página 2
® ® Congratulations on your purchase of a Bushnell ImageView binocular. Before using the product, please read the instructions contained in this manual and take time to familiarize yourself with the different parts and features of the product. CAMERA OPERATION INSTRUCTIONS BUTTON DESCRIPTIONS Mode Snap The MODE button has three functions: 1. Power on: Press and hold the button until the camera turns on. When the camera is connected to a PC via the USB cable provided, the camera will power o
Resumen del contenido incluido en la página 3
LCD DISPLAY 1. High Resolution Mode = 1600x1200 Pixels 2. Low Resolution Mode = 1280x1024 Pixels 3. Select the timer to take a delayed picture. This gives you approximately a 10-second delay. 4. This mode allows you to take short movie clips, saved as “.avi” files. 5. Select different mode. 6. Deletes all the pictures in the memory. 7. Deletes the last picture taken. 8. SD mark appears when SD is inserted. 9. USB mark appears when USB cord is connected between the camera and the PC. 10. Batt
Resumen del contenido incluido en la página 4
5. The mode setting operation is a cycle loop, so press the MODE button to switch to another mode. The loop order of the different modes is shown here: 6. To change settings, toggle through the different modes by pressing the MODE button. When a mode is selected, the indicator symbol on the LCD will appear. You can then select that mode by pressing the SNAP button. 7. When in “Normal” mode, press SNAP to take a picture. Press SNAP-> 8. Pressing the MODE button will cause the camera
Resumen del contenido incluido en la página 5
10.“Low Resolution” Mode will cause your pictures to be of a lower resolution, but allows you to store many more pictures in the camera’s memory. The default setting is Hi resolution. To change the resolution, press the MODE button until the “mode” icon appears. Press the SNAP button and “Lo” will appear. The camera is changed from high resolution to low resolution. Do the same steps for the desired resolution setting. CAPTURED PICTURES WITH BUILT-IN MEMORY: Pixels (resolution) Image quality C
Resumen del contenido incluido en la página 6
12.To delete all pictures in the camera’s memory, select the “Delete” mode. Press the SNAP button to confirm. The picture number will then blink. You will hear a tone that becomes higher as the pictures are deleted. Once complete, the picture number will reset to possible captured numbers. 13.If “Delete Last” icon appears, the display will show the following: Press SNAP to delete the last picture in the camera’s memory. The picture number will be automatically increased after deletion is don
Resumen del contenido incluido en la página 7
b. Select the STO (Mass Storage) or PCC (PC CAM) mode by pressing the SNAP button. Then press the MODE button to confirm and enter the next setting. c. Select 50 Hz or 60 Hz settings for the camera output by pressing the SNAP button. Then press the MODE button to confirm and enter the next setting. The camera’s default mode is the “60” mode, which matches the power frequency for the United States. To change to the “50” mode, press the SNAP button until the “60” changes to “50”. Confirm the sele
Resumen del contenido incluido en la página 8
DOWNLOADING THE PICTURES TO YOUR COMPUTER: 1. The camera will be recognized as a USB mass storage device, which means no special drivers are required for all operating systems later than Windows 98 (Me, 2000, XP). Mac OS 9 and OSX are also compatible. If you have a PC running Windows 98, you must install the driver found on the included CD-ROM BEFORE CONNECTING THE CAMERA TO YOUR PC. 2. If you have a computer OS as listed above that is USB mass storage compliant, a new disc icon will appear in
Resumen del contenido incluido en la página 9
CONNECTING TO THE COMPUTER - System Requirements: Pentium 166MMX minimum (Recommended Pentium 266) Windows 98 / ME / Windows 2000 / XP Minimum 32MB of RAM USB port Minimum 200MB of Hard Drive space with additional 65 MB space for IE and DirectX CD-ROM driver Super VGA Monitor and video card SOFTWARE INSTALLATION Load software prior to connecting your camera to your computer if the OS is Windows 98. If the OS is Windows2000/ME/XP, there is no need to install driver. Simply plug in the camera and
Resumen del contenido incluido en la página 10
BINOCULAR INSTRUCTIONS Your Bushnell binocular is a precision instrument designed to provide many years of pleasurable viewing. This portion of the booklet will help you achieve optimum performance by explaining how you can adjust the binocular to your eyes, and how to care for this instrument. Read the instructions carefully before using your binocular. EYE ADJUSTMENTS (Figure 1) How to Adjust For Distance Between Your Eyes Fig. 1 The distance between the eyes, called "interpupillary distance,"
Resumen del contenido incluido en la página 11
FOCUSING 1. Adjust interpupillary distance. (Figure 1) Fig. 2 2. Set the "diopter setting" (Figure 2) to zero and view a distant object. 3. Keep both eyes open at all times. 4. Using a lens cover or your hand, cover the objective (front) lens of the same side of the binocular that has the "diopter setting." This is usually DIOPTER SETTING the right side. (The left side on zoom models.) 5. Using the center focus wheel, focus on a distant object with fine detail (e.g., brick wall, tree branches,
Resumen del contenido incluido en la página 12
INSTRUCTIONS FOR CARE OF BINOCULARS Your Bushnell binocular will provide years of trouble-free service if it receives the normal care you would give any fine optical instrument. Non-waterproof models should not be exposed to excessive moisture. 1. If your binocular has roll-down, flexible eyecups, store it with the eyecups up. This avoids excessive stress and wear on the eyecups in the down position. 2. Avoid banging and dropping. 3. Store in a cool, dry place. 4. CAUTION: Looking directly at t
Resumen del contenido incluido en la página 13
WARRANTY / REPAIR TWO-YEAR LIMITED WARRANTY Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Departme
Resumen del contenido incluido en la página 14
NOTES 14
Resumen del contenido incluido en la página 15
NOTES 15
Resumen del contenido incluido en la página 16
www.bushnell.com ©2003 Bushnell Performance Optics
