Manual de instrucciones de Nady Systems IRW-2PA

Resumen del contenido incluido en la página 1

IMPORTANT SAFETY INSTRUCTIONS WARNING
An equilateral triangle enclosing a lightning flash/arrowhead symbol
is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure which may be of
sufficient magnitude to constitute a risk of electric shock.
IRW-2PA
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
An equilateral triangle enclosing an exclamation point is intended to
alert the user to the presence of important operating and service
ins

Resumen del contenido incluido en la página 2

CONTENTS SPECIFICATIONS IRW-2PA Wireless PA CONTENTS .......................................................................................................2 Mode ..................................................................... Infrared Frequency Modulated INTRODUCTION ...............................................................................................3 Receiving channels .................................................................Dual channels A & B USING THIS MANUAL ......

Resumen del contenido incluido en la página 3

OPTIONAL ACCESSORIES INTRODUCTION IRDR-2 Dual recharger for two HT-6SC Thank you for purchasing the NADY IRW-2PA Infrared Wireless PA System and con- gratulations on your choice. The IRW-2PA is loaded with top professional operating IRRA-1 LT bodypack recharging adapter features and is the best performance and price value available in Infrared Wireless IR-HBP Battery pack for HT-6SC PA Systems. IR-BBP Battery pack for LT-6SC USING THIS MANUAL IRW-1S Infrared sensor and 35’ extension cable

Resumen del contenido incluido en la página 4

SYSTEM FEATURES LT-6SC BODYPACK TRANSMITTER IRW-2PA INFRARED PA SYSTEM 2. Operation • All-in-one infrared wireless PA system—ideal for schools, lectures, conferences, or a. The IRW-LT6 is provided with a 3.5mm Locking Jack (5) for connecting the karaoke applications microphone. Plug in either the LM-14/O lavalier/lapel mic, DM-14/O direct mic, • Multi-functional wall hanging lockbox houses dual infrared wireless receiver, or HM-10 headmic as supplied. To secure the connection, turn the metal s

Resumen del contenido incluido en la página 5

HT-6SC HANDHELD MICROPHONE TRANSMITTER INSTALLATION 1. The IRW-2PA lockbox should be positioned in the room while considering the 3. Charging following criteria: The IRW-2PA can be used to recharge one or two HT-6SC simultaneously by plac- • IR Sensors should be placed on either side of operating area and as close to ing the handheld microphones directly into the Handheld Microphone Holders microphone operating area as possible. All rules of sensor installation should (12) without removing t

Resumen del contenido incluido en la página 6

INSTALLATION HT-6SC HANDHELD MICROPHONE TRANSMITTER (1) (3) (2) Speakers IR Sensor Nady Wireless Mic IRW-2PA (1) Battery Compartment/Cover (2) Power Switch IR Sensor (3) Power LED Indicator 1. Transmitter Set-up Unscrew and remove the Battery Compartment Cover (1) by sliding it down off the microphone to expose the battery holders. Insert 2 fresh AA alkaline batteries, NiMH rechargeable batteries, or the optional IR-HBP battery pack while observing the correct polarity as marked, and screw th

Resumen del contenido incluido en la página 7

IRW-1S INFRARED (IR) SENSORS INSTALLATION 3. Connections: a. Connect the IRW-1S IR Sensors to the IRW-2PA receiver by plugging the sensor coaxial extension cable plugs into the Infrared Sensor Inputs (1). Each sensor input will receive both channels A and B signals. To increase mobility and maximum (1) range, additional sensors can be added by plugging into the two remaining inputs, or by daisy-chaining sensors. To daisy-chain sensors, disconnect the sensor from the (1) IR Receptor (2) Pow

Resumen del contenido incluido en la página 8

IRW-2PA WIRELESS RECEIVER PA IRW-2PA WIRELESS RECEIVER PA TOP 1. Powering the IRW-2PA Turn on the IRW-2PA using the Power Switch (17) located inside the lockbox on the lower right panel. When powered on, the Ch A and Ch B IR Reception LED In- (2) (1) dicators (6) will light green if the corresponding transmitters are on and red when the transmitters are off. Turn off the IRW-2PA when not charging or in use. 2. Inputs The IRW-2PA has two additional inputs allowing for up to four audio signals t