Manual de instrucciones de Audio-Technica AT2010

Resumen del contenido incluido en la página 1

AT2010
20 series studio/live sound microphones
Cardioid Condenser Handheld Microphone
Operation and Maintenance
The AT2010 requires 48V phantom power for operation.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
When using the microphon

Resumen del contenido incluido en la página 2

311 AT2010 Specifications Element Fixed-charge back plate, permanently polarized condenser Polar pattern Cardioid Frequency response 40-20,000 Hz Open circuit sensitivity –48 dB (3.9 mV) re 1V at 1 Pa Impedance 100 ohms Maximum input sound level 136 dB SPL, 1 kHz at 1% T.H.D. Dynamic range (typical) 113 dB, 1 kHz at Max SPL 1 Signal-to-noise ratio 71 dB, 1 kHz at 1 Pa Phantom power requirements 48V DC, 2 mA typical Weight 233 g (8.2 oz) Dimensions 179.1 mm (7.05") long, 50.8 mm (2.00") head dia