Resumen del contenido incluido en la página 1
USER’S MANUAL
V390 Semi Recumbent Bike
USER WEIGHT LIMITATION: 300lbs(136kgs)
SERIAL NUMBER (found on frame):
Resumen del contenido incluido en la página 2
2 V 390 SEMI-RECUMBENT BIKE PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your bike. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the b
Resumen del contenido incluido en la página 3
3 www.smoothfitness.com PRECAUTIONS Pour réparations futures ou questions connexes : Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your bike. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ AVERTISSEMENT : Pour réduire le risque de brûlures, d'incendie, d'électrocution ou de blessures, lire les précautions suivantes et informations importantes avant d'utili
Resumen del contenido incluido en la página 4
4 V 390 SEMI-RECUMBENT BIKE POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This bike can be seriously damaged by sudden voltage c
Resumen del contenido incluido en la página 5
5 www.smoothfitness.com BEFORE YOU BEGIN Open the boxes: Open the boxes of your new equipment. Inventory all parts included in the boxes, and Supplied Hardware lists on pages 7 for a full count of the parts included. If you are missing any parts or have any questions contact us directly at 888-800-1167 Gather your tools: Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit properly. Having all of the necessary equi
Resumen del contenido incluido en la página 6
6 V 390 SEMI-RECUMBENT BIKE SUPPLIED COMPONENTS / SUPPLIED HARDWARE This list identifies the major components you will use to assemble this product. Upright Post Assembly & Console Upper Cover Console Bottom Cover Console Sleeve Water Bottle Bracket Mesh Backrest & Mesh Front Small Handlebar Upright Sleeve Seat Cushion Backrest Cover Square Stopper, Rail Decoration Cover Pedal Front Stabilizer Hex Head Bolt & Nut (M8) Seat Handlebar Assembly Seat Frame adju
Resumen del contenido incluido en la página 7
7 www.smoothfitness.com SUPPLIED COMPONENTS / SUPPLIED HARDWARE This list identifies the major components you will use to assemble this product. NOTICE: The length of all bolts and screws except those with flat heads is Measured from below the head to the end of the bolt or screw. Flat head bolts and screws are measured from the top of the head to the end of the bolt or screw After unpacking the unit, you will notice that the package
Resumen del contenido incluido en la página 8
8 V 390 SEMI-RECUMBENT BIKE SUPPLIED COMPONENTS / SUPPLIED HARDWARE This list identifies the major components you will use to assemble this product. Part No. and Description Q’TY HARDWARE KIT B 99 Screw, Round Head (M5xp0.8x15mm) 4 pcs 111 Bolt, Socket Head (M6xp1.0x15mm) 4 pcs 112 Bolt, Socket Head (M8xp1.25x16mm) 4 pcs 114 Bolt, Socket Head (M8xp1.25x55mm) 1 pcs Part No. and Description Q’TY HARDWARE KIT C 88 Lock Washer (M8) 10 pcs 90 Washer (8x16x2.0t) 10
Resumen del contenido incluido en la página 9
9 www.smoothfitness.com COMPLETE PARTS LIST NO. Item Name Q'TY V390-1 Main Frame 1 1 V390-2 Front Seat Support Bracket V390-3 Inner Seat Carriage Slider 1 1 V390-4 Outer Seat Carriage Slider V390-5 Front Stabilizer 1 1 V390-6 Rear Stabilizer V390-7 Upright Post 1 1 V390-8 Front Small Handlebar V390-9 Seat Carriage 1 1 V390-10 Seat Fixed Stand V390-11 Seat Frame 1 1 V390-12 Seat Handlebar V390-13 Front Left Chain Cover 1 1 V390-14 Front Right Chain Cover V390-15 Cra
Resumen del contenido incluido en la página 10
10 V 390 SEMI-RECUMBENT BIKE COMPLETE PARTS LIST NO. Item Name Q'TY V390-38 Console Bottom Cover 1 V390-39 Left Console Sleeve 1 V390-40 Right Console Sleeve 1 V390-41 Mesh Backrest 1 V390-42 Seat Cushion 1 V390-43 Foam Grip (330mm) 2 V390-44 Hand Pulse Sensor (L&R) 2 V390-45 Round Plug (31.8mm) 4 V390-46 Tube Plug (25.4mm) 4 V390-47 Locking Bar 1 V390-48 Left Seat Carriage Cover 1 V390-49 Right Seat Carriage Cover 1 V390-50 Adjusting Handle 1 V390-51 Seat Fixed Wheel 1 V3
Resumen del contenido incluido en la página 11
11 www.smoothfitness.com COMPLETE PARTS LIST NO. Item Name Q'TY V390-76 Bushing (10.2x14x2mm) 1 V390-77 Bushing (10.2x14x10mm) 1 V390-78 Idler Spring 1 V390-79 Spring for Seat Fixed Stand 1 V390-80 Spring for Fixing Pin 1 V390-81 Spring for Adjusting Handle Stand 1 V390-82 Bushing for Seat Fixed Wheel 2 V390-83 Screw Cap 2 V390-84 4 Bushing (8x12x6.5mm) V390-85 C Ring (20mm) 1 V390-86 1 Wave Washer V390-88 Lock Washer (M8) 23 V390-89 2 Washer (6x19x1.5t) V390-90 Washer
Resumen del contenido incluido en la página 12
12 V 390 SEMI-RECUMBENT BIKE COMPLETE PARTS LIST NO. Item Name Q'TY V390-115 Bolt, Socket Head (M8xp1.25x90mm) 4 V390-116 Bolt, Hex Head (M8xp1.25x16mm) 4 V390-117 Bolt, Hex Head (M8xp1.25x105mm) 1 V390-118 Bolt, Hex Head (M8xp1.25x115mm) 2 V390-119 Bolt, Hex Head (M10xp1.5x90mm) 1 V390-120 Bolt, Hex Head (M10xp1.5x115mm) 2 V390-121 Collar Screw (M6) 2 V390-122 Flange Nut (M10) 2 V390-123 Nut (M6) 3 V390-124 Nut (M8) 4 V390-125 Nylock Nut (M6) 6 V390-126 Thin Nylock Nut (M8)
Resumen del contenido incluido en la página 13
13 www.smoothfitness.com PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED
Resumen del contenido incluido en la página 14
14 V 390 SEMI-RECUMBENT BIKE PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.
Resumen del contenido incluido en la página 15
15 www.smoothfitness.com PARTS DISCRIPTION Console Mesh Backrest Front Small Handlebar Console Sleeve Water Bottle Pulse Bracket Sensor Upright Post Adjusting Handle Upright Sleeve Seat Carriage Assembly Main Frame Pull Pin Front Stabilizer Pedal Rear Stabilizer
Resumen del contenido incluido en la página 16
16 V 390 SEMI-RECUMBENT BIKE ASSEMBLY Step 1: Attach the Stabilizers, Leveler and Pedals Note: the stabilizer is marked with an R to denote the right side. Caution: Improperly rotating the pedal threads may cause damage to the equipment A).Attach the front stabilizer to the main frame using 2x M8xp1.25x90mm Socket Head Bolts (115), 2 x M8 Lock Washers (88) and 2 x 8x16x2.0t Washers (90). Slide the bolts through the front stabilizer and tread them in to the main frame. B). At
Resumen del contenido incluido en la página 17
17 www.smoothfitness.com ASSEMBLY STEP 2: Attach the Upright Post Assembly Note: Do not tighten the upright post bolts until all four bolts are threaded into the post. Caution: Do not pinch the wires between the frame A). Slid the upright sleeve (34) on to the upright post assembly. B). Attach the upright post assembly to the main frame using 4 x M8xp1.25x16mm socket head bolts (112), 4 x M8 lock washers (88) and 4 x 8x16x2.0t washers(90). C). Connect the Pulse Sensor Wire 3 (
Resumen del contenido incluido en la página 18
18 V 390 SEMI-RECUMBENT BIKE ASSEMBLY STEP 3: Attach the Console and Front Handlebar Make sure all wires are recessed into the frame. DO NOT trap or pinch the wires. A). Attach the console bottom cover (38) to the console upper cover (37) and secure using 4 x M5xp0.8x25mm pan head screws (97). See Fig.1 B). Remove the 4 x bolts and washers from the front handlebar. C). Slide the front handlebar through the upright post bracket. Secure the handlebar using 5 x M8xp1.25x16mm button he
Resumen del contenido incluido en la página 19
19 www.smoothfitness.com ASSEMBLY STEP 4: Attach the Console Sleeve Assembly and Water Bottle bracket A). Slide the console sleeve assembly (39) (40) around the upright post. B) Be certain that the sleeve assembly aligns together properly and the lowest portion of the console bottom cover is inside the console sleeve assembly. C). Secure the two sleeves together using 4 x M5xp0.8x15mm round head screws (99) D). Remove the pre-installed water bottle bracket screws from the console p
Resumen del contenido incluido en la página 20
20 V 390 SEMI-RECUMBENT BIKE ASSEMBLY STEP 5: Attach the Inner Seat Carriage Slider A). Insert the inner seat carriage slider (3) Into the main frame. B) Slide the slider up to #5 and insert the pull pin in to the hole making sure the pan passes through the main frame into the seat slider carriage. C). Tighten the pull pin clockwise as much as possible.
