Resumen del contenido incluido en la página 1
14-1164.fm Page 1 Wednesday, November 25, 1998 1:20 PM
Cat. No. 14-1164
OWNER’S MANUAL
Please read before using this equipment.
Micro-37
Voice-Activated
Microcassette Tape
Recorder
Resumen del contenido incluido en la página 2
14-1164.fm Page 2 Wednesday, November 25, 1998 1:20 PM FEATURES Your Optimus Micro-37 Voice-Activated Microcassette Tape Recorder is ideal for quick note-taking. Its ultra-small size makes it easy to slip into a pocket or brief- case. You can use it at school, at business conferences, for dictation in the office, or anywhere on the go! You can start record- ing manually or set the recorder so sound activates recording. Your recorder includes these features: Voice-Activation Circuitry (VOX) —
Resumen del contenido incluido en la página 3
14-1164.fm Page 3 Wednesday, November 25, 1998 1:20 PM External Microphone Jack — lets you use an external microphone, so you can extend your recording range. Earphone Jack — lets you use an optional earphone to listen to a tape privately. Quick Record — lets you instantly change from playback to record. Tape Speed Switch — lets you record at normal or slow speed. Slow speed gives you twice the normal recording time. Fast Play — lets you play a tape back about 25% faster than normal speed, to
Resumen del contenido incluido en la página 4
14-1164.fm Page 4 Wednesday, November 25, 1998 1:20 PM We recommend you write your recorder’s serial number here. The number is inside the recorder’s battery compartment. Serial Number: ____________ 4
Resumen del contenido incluido en la página 5
14-1164.fm Page 5 Wednesday, November 25, 1998 1:20 PM CONTENTS Preparation ............................................ 6 Before You Begin ............................. 6 Connecting to Power ....................... 6 Using Batteries ......................... 7 Using AC Power ..................... 10 Using Vehicle Battery Power .. 12 Connecting an Earphone .............. 14 Listening Safely ...................... 15 Traffic Safety ........................... 15 Connecting an External Microp
Resumen del contenido incluido en la página 6
14-1164.fm Page 6 Wednesday, November 25, 1998 1:20 PM PREPARATION BEFORE YOU BEGIN To protect the Micro-37 during shipment, a piece of paper is attached to the cassette door. Remove this paper before you use the Micro-37. CONNECTING TO POWER You can power your Micro-37 from any of the following: • Internal battery power • AC power (with an optional AC adapter) • Your vehicle’s battery (with an optional DC adapter) 6
Resumen del contenido incluido en la página 7
14-1164.fm Page 7 Wednesday, November 25, 1998 1:20 PM Using Batteries You can use two AA batteries (not sup- plied) to power your Micro-37. We recom- mend alkaline batteries, such as Ra- dioShack Cat. No. 23-552. Cautions: • Use only fresh batteries of the required size and recommended type. • Never leave dead or weak batteries in the Micro-37. Batteries can leak chem- icals that can destroy electronic cir- cuits. • Do not mix old and new batteries, dif- ferent types of batteries (standard,
Resumen del contenido incluido en la página 8
14-1164.fm Page 8 Wednesday, November 25, 1998 1:20 PM Follow these steps to install batteries. 1. Slide the battery compartment cover in the direction of the arrow until it stops, then lift up the cover. Caution: The battery compartment cover is attached to the recorder. Do not try to remove it. 2. Insert the batteries into the compart- ment as indicated by the polarity sym- bols (+ and –) marked inside the compartment. 3. Close the battery compartment cover by pressing it down and sliding i
Resumen del contenido incluido en la página 9
14-1164.fm Page 9 Wednesday, November 25, 1998 1:20 PM Notes: • If the record/battery indicator to the right of the EAR jack does not light or lights dimly during manual recording, replace the batteries. • If you do not plan to use the Micro-37 for several days, or if you plan to use only AC or vehicle battery power, remove the batteries. 9
Resumen del contenido incluido en la página 10
14-1164.fm Page 10 Wednesday, November 25, 1998 1:20 PM Using AC Power To power the Micro-37 from an AC outlet, you need an AC adapter (not supplied), such as Cat. No. 273-1654B. Cautions: • You must use an AC adapter that sup- plies 3 volts DC power and delivers at least 200 milliamps. The center tip of the adapter barrel plug must be set to positive, and the plug must properly fit the Micro-37’s jack. The recom- DC3V mended AC adapter meets these specifications. Using an AC adapter that do
Resumen del contenido incluido en la página 11
DC3V MIC RadioSnack 14-1164.fm Page 11 Wednesday, November 25, 1998 1:20 PM Follow these steps to power the Micro-37 from standard AC power. 1. Set the AC adapter’s voltage switch to 3V. 2. Attach the 2.35 mm outer diameter/0.7 mm inner diameter barrel plug to the AC adapter’s cord with the tip set to positive (+). 3. Insert the barrel plug into the Micro- 37’s DC3V jack. This disconnects inter- nal batteries. 4. Plug the other end of the AC adapter into a standard AC outlet. 11
Resumen del contenido incluido en la página 12
14-1164.fm Page 12 Wednesday, November 25, 1998 1:20 PM Using Vehicle Battery Power To power the Micro-37 from your vehicle’s battery, you need a DC adapter (not sup- plied), such as Cat. No. 270-1560. Cautions: • You must use a DC adapter that sup- plies 3 volts DC power and delivers at least 200 milliamps. The center tip of its barrel plug must be set to positive, and the plug must properly fit the Micro-37’s jack. The recom- DC3V mended DC adapter meets these specifications. Using a DC ad
Resumen del contenido incluido en la página 13
DC3V MIC 14-1164.fm Page 13 Wednesday, November 25, 1998 1:20 PM Follow these steps to power the Micro-37 from your vehicle’s battery. 1. Set the DC adapter’s voltage switch to 3V. 2. Attach the 2.35 mm outer diameter/0.7 mm inner diameter barrel plug with the tip set to positive (+). 3. Insert the barrel plug into the Micro- 37’s DC3V jack. This disconnects the internal batteries. 4. Plug the other end of the DC adapter into the vehicle’s cigarette-lighter socket. 13
Resumen del contenido incluido en la página 14
14-1164.fm Page 14 Wednesday, November 25, 1998 1:20 PM CONNECTING AN EARPHONE You can use an optional mono earphone 3 with a submini ( /32-inch) plug to listen to a tape in privacy. Notes: • You can also use an earphone to mon- itor what the recorder picks up through the internal microphone or an external microphone. • Your local RadioShack store carries a wide selection of earphones. Insert the earphone’s plug into the record- er’s EAR jack. The built-in speaker auto- matically disconnect
Resumen del contenido incluido en la página 15
14-1164.fm Page 15 Wednesday, November 25, 1998 1:20 PM Listening Safely To protect your hearing, follow these guidelines when you use an earphone. • Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable listening level. • Do not listen at extremely high volume levels. Extended high-volume listening can lead to permanent hearing loss. • Once you set the volume, do not increase it. Over time, your ears adapt to the volume
Resumen del contenido incluido en la página 16
14-1164.fm Page 16 Wednesday, November 25, 1998 1:20 PM CONNECTING AN EXTERNAL MICROPHONE You can use an optional microphone with a 3 submini ( /32-inch) plug to extend the re- cording range. Your local RadioShack store carries a wide selection of micro- phones. Insert the microphone’s plug into the re- corder’s MIC jack. The built-in microphone automatically disconnects. DC3V NORMAL F.PLAY SPEED MIC MIC SENS VOX 2.4 1.2 MIC Jack 16
Resumen del contenido incluido en la página 17
14-1164.fm Page 17 Wednesday, November 25, 1998 1:20 PM OPERATION LOADING A MICROCASSETTE TAPE Note: We recommend MC-60 microcas- sette tapes for up to 2 hours of recording/ playback time, or MC-90 microcassette tapes for up to 3 hours of recording/play- back time. Follow these steps to load a microcassette tape. 1. Use a pencil to turn the cassette’s hub and remove any tape slack. Avoid touching the tape. 17
Resumen del contenido incluido en la página 18
VOICE ACTIVATION 14-1164.fm Page 18 Wednesday, November 25, 1998 1:20 PM 2. Lift the latch to open the cassette com- partment door. Latch 2 SPEED MICRO-37 MICROCASSETTE RECORDER 3. Insert the microcassette into the door’s guides so the microcassette’s open edge faces out. Note: An arrow on the cassette com- partment shows the tape travel direc- tion. Be sure the tape’s full reel is in the opposite direction from the arrow. 4. Close the door. 18 2 SPEED MICRO-37 MICROCASSETTE RECORDER 1 2 3
Resumen del contenido incluido en la página 19
14-1164.fm Page 19 Wednesday, November 25, 1998 1:20 PM RECORDING You can record manually or use voice-acti- vated recording. When you use the voice activating feature, recording begins when the recorder picks up sound and stops a few seconds after the sound stops. Follow these steps to record. 1. Load the microcassette tape. 2. Set SPEED on the side of the recorder as follows: DC3V NORMAL F.PLAY SPEED MIC MIC SENS VOX 2.4 1.2 • To double the tape’s recording/play- back time, set SPEED to 1.
Resumen del contenido incluido en la página 20
14-1164.fm Page 20 Wednesday, November 25, 1998 1:20 PM • For better sound quality, set SPEED to 2.4. This setting allows 60 min- utes of total recording/playback time on an MC-60 tape, or 90 min- utes on an MC-90 tape. 3. Set MIC SENS/VOX as follows: DC3V NORMAL F.PLAY SPEED MIC MIC SENS VOX 2.4 1.2 • To manually start and stop record- ing, set MIC SENS/VOX to MIC SENS. • To use voice-activated recording, set MIC SENS/VOX to VOX. Note: The voice-activated feature saves power and tape if the
