Resumen del contenido incluido en la página 1
1.3 Megapixel
Model#: 118213
Lit. #: 98- 0795/07-06
118213 QVC Imageview-1LIM.indd 1 8/17/06 10:19:03 PM
Resumen del contenido incluido en la página 2
118213 QVC Imageview-1LIM.indd 2 8/17/06 10:19:03 PM
Resumen del contenido incluido en la página 3
® Congratulations on your purchase of the Bushnell ImageView binocular! The Bushnell ImageView binocular takes the technology of digital photography and combines it with a high-quality compact binocular. This allows you to observe sporting events, wildlife, scenic vistas or anything you would normally use a binocular for, and then save the image in a built-in attached digital camera. You can then download these images to your computer and e- mail them to your friends and family, print off
Resumen del contenido incluido en la página 4
CAMERA OPERATION INSTRUCTIONS Button Descriptions The MODE button has three functions: 1. Power on: Press and hold the button until the camera turns on. When the camera is connected to a PC via the USB cable provided, the camera will power on automatically. 2. Power off: While the camera is on, press and hold the button until the camera turns off. If the camera has not been used or if a button has not been pressed for over 2 minutes, the camera will automatically power off to save batt
Resumen del contenido incluido en la página 5
LcD DispLay 1. High Resolution Mode = 1280x1024 Pixels 2. Low Resolution Mode = 640x480 Pixels 3. Select the timer to take a delayed picture. This gives you approximately a 10-second delay. 4. This mode allows you to take short movie clips, saved as “.avi” files. 5. Select different resolution mode. 6. Deletes all the pictures in the memory. 7. Deletes the last picture taken. 8. SD mark appears when an SD card is inserted. 9. USB mark appears when USB cord is connected be
Resumen del contenido incluido en la página 6
5. The mode setting operation is a cycle loop, so press the MODE button to switch to another mode. The loop order of the different modes is shown here: 6. To change settings, toggle through the different modes by pressing the MODE button. When a mode is selected, the indicator symbol on the LCD will appear. You can then select that mode by pressing the SNAP button. 7. When in “Normal” mode, press SNAP to take a picture. Press SNAP-> 8. Pressing the MODE button will cause th
Resumen del contenido incluido en la página 7
10. “Low Resolution” Mode will cause your pictures to be of a lower resolution, but allows you to store many more pictures in the camera’s memory. The default setting is Hi resolution. To change the resolution, press the MODE button until the “mode” icon appears. Press the SNAP button and “Lo” will appear. The camera is changed from high resolution to low resolution. Repeat these steps to return to the high resolution setting. picture c ApAcit Y with built-in memor Y: ( *May vary due to subj
Resumen del contenido incluido en la página 8
12. To delete all pictures in the camera’s memory, select the “Delete” mode. Press the SNAP button to confirm. The picture number will then blink. You will hear a tone that becomes higher as the pictures are deleted. Once complete, the picture number will reset to possible captured numbers. 13. If “Delete Last” icon appears, the display will show the following: Press SNAP to delete only the last picture in the camera’s memory. The "total pictures taken" number will be automatically decreas
Resumen del contenido incluido en la página 9
b. Select the STO (Mass Storage) or PCC (PC CAM) mode by pressing the SNAP button. Then press the MODE button to confirm and enter the next setting. c. Select 50 Hz or 60 Hz settings for the camera output by pressing the SNAP button. Then press the MODE button to confirm and enter the next setting. The camera’s default mode is the “60” mode, which matches the power frequency for the United States. To change to the “50” mode, press the SNAP button until the “60” changes to “50.”
Resumen del contenido incluido en la página 10
DoWnLoaDinG tHe pictures to your coMputer: 1. The camera will be recognized as a USB mass storage device (if it is set to "STO" and not "PCC"), which means no special drivers are required for all operating systems later than Windows 98 (Me, 2000, XP.) Mac OS 9 and OSX are also compatible. If you have a PC running Windows 98, you must install the driver found on the included CD-ROM BEFORE CONNECTING THE CAMERA TO YOUR PC. 2. If you have a computer OS as listed above that is USB mass storage
Resumen del contenido incluido en la página 11
System Requirements (Minimum) OS: Windows® 98/98SE/2000/ME/XP CPU: MMX Pentium® 200MHZ equivalent or faster (Pentium® III 500 MHz for PhotoSuite5™) Memory: 32MB minimum (64MB recommended for PhotoSuite) SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color 200 MB available hard disk space (if installing PhotoSuite) Internal USB Port Software Installation If you are using Windows 98, you must install drivers before connecting the camera to your PC. Insert the CD-ROM into your co
Resumen del contenido incluido en la página 12
Transferring The Photos & Videos to Your PC continued 3. The LCD display will indicate “STO”, and the ImageView will be recognized as a standard “USB Mass Storage” device. This means that the camera files can be easily viewed, edited, or copied to your hard drive, just as if they were stored on an external hard drive or a CD-ROM. 4. (This step is not required with Windows XP, simply use the options in the pop-up window to view, copy or edit your photos). Open My Computer or Windows Explore
Resumen del contenido incluido en la página 13
Transferring The Photos & Videos to Your PC continued 7. You’re now ready to open the photo files in any photo editing software. Just use File>Open and go to the folder where you stored the photos earlier. If you are using PhotoSuite, select File>Open Photo, then use the “Look in” pull down menu at the top of the Open window, select “My Computer”, select your hard drive, and double click any photo in the folder where you copied the files from the camera. It is also possible to open and work
Resumen del contenido incluido en la página 14
BinocuLar instructions Your Bushnell binocular is a precision instrument designed to provide many years of pleasurable viewing. This portion of the booklet will help you achieve optimum performance by explaining how you can adjust the binocular to your eyes, and how to care for this instrument. Read the instructions carefully before using your binocular. eye aDJustMents (Figure 1) Fig. 1 How to Adjust For Distance Between Your Eyes The distance between the eyes, called “interpupillary dist
Resumen del contenido incluido en la página 15
FocusinG 1. Adjust interpupillary distance. (Figure 1) Fig. 2 2. Set the “diopter setting” (Figure 2) to zero and view a distant object. 3. Keep both eyes open at all times. 4. Using a lens cover or your hand, cover the objective (front) lens of the same side of the binocular that has the “diopter setting.” This is usually Diopter setting the right side. (The left side on zoom models.) 5. Using the center focus wheel, focus on a distant object with fine detail (e.g., brick wall, tree bra
Resumen del contenido incluido en la página 16
instructions For care oF BinocuLars Your Bushnell binocular will provide years of trouble-free service if it receives the normal care you would give any fine optical instrument. The Imageview is not waterproof, and should not be exposed to excessive moisture. 1. If your binocular has roll-down, flexible eyecups, store it with the eyecups up. This avoids excessive stress and wear on the eyecups in the down position. 2. Avoid banging and dropping. 3. Store in a cool, dry place. 4. CAUTION:
Resumen del contenido incluido en la página 17
TWO-YEAR LIMITED WARRANTY Fcc n ote: This equipment has been tested and found to comply ® Your Bushnell product is warranted to be free of defects in materials and workmanship for two years after with the limits for a Class B digital device, pursuant the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace to Part 15 of the FCC Rules. These limits are designed the product, provided that you return the product postage prepaid. This warrant
Resumen del contenido incluido en la página 18
WARNING make sure you download any pictures from your camera beFore you remove the batteries from the camera, unless you have been using an SD card rather than the internal memory for photo storage. WARNING Do not look directly at the sun through your binoculars. Doing so may cause permanent eye damage. Customer Service: (800) 423-3537 www.bushnell.com ©2006 Bushnell Outdoor Products 118213 QVC Imageview-1LIM.indd 18 8/17/06 10:19:08 PM
