Resumen del contenido incluido en la página 1
ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
Resumen del contenido incluido en la página 2
This Quick Start Guide describes only basic operations, Applicable accessories: Headphones, USB connection such as how to record, play back, or erase messages. support cable The operating instructions explaining all the features and functions are supplied with the IC recorder as PDF Disposal of waste batteries files in 19 languages stored on the supplied CD-ROM. (applicable in the European Union You can copy the PDF files of the operating and other European countries with instructions to
Resumen del contenido incluido en la página 3
Notice for the customers: the following information is only applicable to equipment sold in the countries applying EU directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
=> The recorded musi
Resumen del contenido incluido en la página 4
Utilizing Your Computer Table of Contents Using the IC Recorder with Your Checking the Contents of Computer ...........................................................18 the Package .......................................................5 Transferring Files from Your Computer to the IC Recorder .........................................21 Getting Started Playing Back Music Files ............................22 Step 1: Preparing a Power Source .......6 Step 2: Setting the Clock ................
Resumen del contenido incluido en la página 5
Carrying case (1) Checking the Contents Battery case (1) of the Package CD-ROM (1) (The operating instructions are stored IC Recorder (1) as PDF files.) Operating Instructions Remove the film on the display window before you use the IC recorder. NH-AAA (size AAA) rechargeable battery (1) Stereo headphones (1) USB connection support cable (1) GB ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
Resumen del contenido incluido en la página 6
Getting Started 2 Insert one NH-AAA rechargeable battery with correct polarity, and Step 1: Preparing a close the lid. Power Source Remove the film on the display window before you use the IC recorder. Inserting the battery 3 Charge the battery by connecting 1 Slide and lift the battery the USB connector of the IC compartment lid. recorder to your computer. Computer IC recorder To USB connector GB ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
Resumen del contenido incluido en la página 7
Disconnecting the IC Step 2: Setting the recorder from your Clock computer Follow the procedures below; otherwise, data may be damaged. 1 Make sure that the operation indicator is not flashing. , 2 Disconnect the IC recorder from the USB connector of the computer. ENT On the Windows screen, left-click /MENU “Safely Remove Hardware” on the taskbar, and click “Safely remove USB Mass Storage Device.” On the Macintosh screen, drag the “IC RECORDER” on the desktop to “Trash” and drop
Resumen del contenido incluido en la página 8
Continued directly from Setting the clock using the “Step 1: Preparing a Power menu Source” While the IC recorder is in the stop mode, you can set the clock using the menu. 1 Press or on the control button 1 Select “DATE & TIME” in the menu. to set the year, month, day, hour, and minute in sequence, and then Press and hold /MENU to enter the menu mode. press ENT. The menu mode will be displayed in the display window. 2 Press (stop) to return to the display of the stop mode. Pr
Resumen del contenido incluido en la página 9
To display the current date and 2 Press the or on the control time button to select “08y1m1d,” and then press ENT. Press (stop) to display the current date and time. 3 Press or on the control button to set the year, month, day, hour, and minute in sequence, and then press ENT. 4 Press (stop) to return to the display of the stop mode. Note If you do not press ENT within one minute of entering the clock setting data, the clock setting mode is cancelled and the window will
Resumen del contenido incluido en la página 10
2 Press or on the control button Step 3: Setting the to select “DETAIL MENU,” and then press ENT. Language to Be Used in the Display Window , 3 Press or on the control button to select “LANGUAGE,” and then ENT press ENT. 4 Press or on the control button /MENU to select the language that you want to use, and then press ENT. You can select the following languages. European model : ENGLISH, Pyccкий (Russian) Other models : You can select the language to be used ENGLISH, Pycc
Resumen del contenido incluido en la página 11
Turning the power off Turning the IC Slide the HOLD switch in the direction of Recorder On or Off the arrow in the stop mode. “HOLD” lights up and the key mark flashes and then “POWER OFF” is displayed. The IC recorder turns off within a few seconds. Turning the power on Slide the HOLD switch in the opposite direction from that of the arrow. The IC recorder is turned on, and an accessing animation is displayed. Tips
=> When you are not going to use the IC recorder for a long time, we
Resumen del contenido incluido en la página 12
Recording/Playing Back Messages Recording Messages Built-in microphones (headphone) jack Operation indicator , /MENU ENT 1 Select a folder. 2 Start recording. Press /MENU to display the folder Press (record/pause) in the stop selection window. mode. Press or on the control button to The operation indicator lights in red. select the folder in which you want to (When “LED” is set to “OFF” in the record messages ( FOLDER01-05), menu, the operation indicator does an
Resumen del contenido incluido en la página 13
The new message will be automatically recorded after the last recorded message. Speak into the built-in microphones. 3 Press (stop) to stop recording. The IC recorder stops at the beginning of the current recording. GB 1 ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
Resumen del contenido incluido en la página 14
Playing Back Messages Operation indicator VOL +, – , /MENU 1 Select a folder. 3 Press to start playback. Press /MENU. The operation indicator lights in green. Press or on the control button to (When “LED” is set to “OFF” in the select the folder, and then press ENT. menu, the operation indicator does 2 Press or to select the not light.) message you want to play. 4 Press VOL + or – on the control button to adjust the volume. 5 Press (stop) to stop pl
Resumen del contenido incluido en la página 15
You can erase unwanted messages, Editing Messages retaining all other messages when the IC recorder is in the stop or playback mode. Erasing Messages When a message is erased, the You can erase the recorded messages remaining messages will advance and one by one or all messages in a folder at be renumbered so that there will be no a time. space between messages. Note 1 Select the message you want to Once a recording has been erased, you cannot erase. retrieve it. 2 Press and hold /MENU
Resumen del contenido incluido en la página 16
4 Press or on the control button Erasing all messages in a to select “EXECUTE,” and then press folder ENT. “ERASING …” appears in the display window and the selected message will be erased. , ENT /MENU To cancel erasing Select “CANCEL” in step 4, and then press ENT. To erase another message Proceed with the same steps again from the beginning. 1 Select the folder containing the messages you want to erase when To erase a part of one message the IC recorder is in the stop mode. Di
Resumen del contenido incluido en la página 17
3 Press or on the control button to select “ERASE ALL,” and then press ENT. 4 Press or on the control button to select “EXECUTE,” and then press ENT. “ERASING …” appears in the display window and all messages in the selected folder will be erased. To cancel erasing Select “CANCEL” in step 4, and then press ENT. GB 1 ICD-UX71/UX81/UX71F/UX81F/UX91F QSG GB/FR/ES/NL 4-114-026-11(1)
Resumen del contenido incluido en la página 18
Notes Utilizing Your Computer
=> Operation is not guaranteed if any operating system other than those described above Using the IC Recorder (Windows® 98 or Linux, etc.) is used. with Your Computer
=> Any 64 bit operating system is not supported.
=> For the latest version information and System requirements compatibility with your operating system, please access the support home page for Operating systems: the IC recorder: Windows Vista® Ultimate European model: http://support.sony-europ
Resumen del contenido incluido en la página 19
When you are using Windows® 000 Professional Install the driver using “SonyRecorder_ Driver.exe” in the IC recorder. Connecting the IC recorder Computer to your computer You can transfer the IC recorder data IC recorder onto your computer by connecting the IC recorder to the computer. Remove the USB cap from the IC recorder To USB connector and then connect the IC recorder to the USB connector of your computer. The IC recorder is recognized by the Tip computer as soon as the connecti
Resumen del contenido incluido en la página 20
Notes Disconnecting the IC
=> If you connect more than two USB devices recorder from your to your computer, normal operation will not be guaranteed. computer
=> Use of this IC recorder with a USB hub or a Follow the procedures below; otherwise, USB connection support cable other than the supplied cable is not guaranteed. data may be damaged.
=> A malfunction may occur depending on the 1 Make sure that the operation USB devices connected at the same time. indicator is not flashing.
=> Befor
