Resumen del contenido incluido en la página 1
Safety Instructions & Operator's Manual for
21” STEEL DECK
WALK MOWERS
SERIES 19
Models
2167519B (7800174)
P2167519B (7800175)
P2187519BV (7800176)
P2187519BVE (7800178)
P216019KWV (7800193)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to ‘Engine Power Rating Information’ for
further details.
Manual No. 7101294 (I.R. 1/26/
Resumen del contenido incluido en la página 2
Thank You for purchasing this quality-built Snapper product. We’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them. This machine is designed and intended only for finish cutting of established lawns and is not
Resumen del contenido incluido en la página 3
Operator Safety Features and Controls Operation Maintenance Troubleshooting Warranties Table of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Operator Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Features and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Important Operator Safety Instructions ! ! WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of soun
Resumen del contenido incluido en la página 5
Operator Safety Important Operator Safety Instructions (Continued) ! ! Safe Handling of Gasoline Operation (Continued From Previous Page) (Continued From Previous Column) 6. DO NOT fill fuel containers inside a vehicle or on a truck 13. DO NOT operate mower without the entire grass catch- or trailer bed with a plastic liner. Always place the contain- er, or guards in place discharge guard, rear guard or other ers on the ground away from the vehicle before filling. safety devices in place and wor
Resumen del contenido incluido en la página 6
Features and Controls IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions. G J I K L H A B F D C E Features and Controls A. Oil Fill Cap and Dipstick G. Blade Control B. Fuel Filler Cap H. Rope Start Handle C. Grass Bag Adapter I. Ground Speed Control D. Rear Height Adjustment Latch (2) J. Drive Wheel Control E. Front Height Adjustment Latch (2) K. Engine Speed Control
Resumen del contenido incluido en la página 7
Operation Operation Pre-Start Check List Starting and Operation Make the following checks and perform the service required Engine and Blade (Briggs Engines) before each start-up. 1. Move the engine speed control to the fast (‘Rabbit’) 1. Check the guards, deflectors, grass bag, adapter, and position. covers to make sure all are in place and securely 2. Push the primer button (A, Figure 3) three times to tightened. start a cold engine. 2. Check the blade control (A, Figure 1), wheel drive control
Resumen del contenido incluido en la página 8
Operation (Continued) Starting and Operation (Continued) Stopping 1. Stop forward motion of the mower by releasing the Engine and Blade (Kawasaki Engine) wheel drive control. 1. Make sure the fuel valve (A, Figure 5) on the engine is 2. Stop the engine and blade by releasing the blade open. control. Handle Height Adjustment The height of the mower handle can be adjusted as follows: 1. Loosen the lower nuts (A, Figure 7) on each A lower handle. Figure 5: Fuel shut-off (Kawasaki engine only) B 2.
Resumen del contenido incluido en la página 9
Operation Operation (Continued) Recycling Operation WARNING ! ! Note: For best recycling results, cut up to a maximum of 1/3 DO NOT attempt any maintenance, adjustments or service of grass blade length and recycle ONLY when grass is dry. with engine and blade running. STOP engine and blade. 1. Set all wheels in the highest cutting position (Notch 7). Disconnect spark plug wire and secure away from spark Refer to the Section entitled “Cutting Height plug. Engine and components are HOT. Avoid seri
Resumen del contenido incluido en la página 10
Operation (Continued) Installing the Grass Bag Adapter WARNING ! ! (Optional Accessory on Some Models) DO NOT attempt any maintenance, adjustments or service 1. Remove the recycling cover. Refer to the Section entitled with engine and blade running. STOP engine and blade. “Recycling Operation”. Disconnect spark plug wire and secure away from spark 2. Install the adapter (A, Figure 12) to the deck in place of plug. Engine and components are HOT. Avoid serious the recycling cover, making sure th
Resumen del contenido incluido en la página 11
Operation Operation (Continued) WARNING ! ! DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark A plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Installing the Grass Bag Adapter B (Continued) Flip the pulley over so that the bushing flange is under the pulley. The bushing will act as a washer between the pulley and the stan
Resumen del contenido incluido en la página 12
Maintenance Check Grease Level in Transmission Maintenance - Introduction 1. Remove the transmission fill plug (A, Figure 17). Roll To retain the quality of the mower, use genuine SNAPPER the machine forward or backward while looking down replacement parts only. Contact a local SNAPPER dealer for into the plug hole. parts and service assistance. For the correct part or 2. If liquid grease is not visible on the input gear (the small information for a particular mower, always mention the gear bel
Resumen del contenido incluido en la página 13
Maintenance Maintenance (Continued) Check Transmission Poly-V Belt WARNING ! ! 1. Visually check the poly-v belt for cracking, fraying, sev- DO NOT attempt any maintenance, adjustments or service ered or exposed belt strands. If worn or damaged, with engine and blade running. STOP engine and blade. replace the belt before operating the mower. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious Service - Periodic burns, allow sufficient time f
Resumen del contenido incluido en la página 14
Maintenance (Continued) A WARNING ! ! B DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury. C Mower Blade Replacement Figure 21: Ninja blade wear limit
Resumen del contenido incluido en la página 15
Maintenance Maintenance (Continued) A WARNING ! ! G B DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. D C Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious E F burns, allow sufficient time for all components to cool. Blade Sharpening (Continued) 4. Sharpen the blade on a grinding wheel at an angle of 22 to 28 degrees (B, Figure 23). DO NOT sharpen the blade beyond the original cutt
Resumen del contenido incluido en la página 16
Maintenance (Continued) Drive Spring Repair/Replacement WARNING ! ! If the drive spring (A, Figure 26) is loose, reconnect. If the DO NOT attempt any maintenance, adjustments or service spring is broken, replace with a new spring. with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark Note: Use a pair of needle nose pliers to install the drive plug. Engine and components are HOT. Avoid serious spring. burns, allow sufficient time for all compo
Resumen del contenido incluido en la página 17
Maintenance Maintenance (Continued) A WARNING ! ! DO NOT attempt any maintenance, adjustments or service B with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Driven Disc Adjustment (Continued) 2. Remove the driven disc spring (A, Figure 28) from the driven disc assembly (B). Also remove the pin and washer (C) from the transfer rod (D
Resumen del contenido incluido en la página 18
Maintenance (Continued) Driven Disc Bearing Replacement WARNING ! ! DO NOT attempt any maintenance, adjustments or service IMPORTANT: The bearing on these machines is staked into with engine and blade running. STOP engine and blade. the thrust plate. The bearing will have to be driven out with a Disconnect spark plug wire and secure away from spark mallet and a large punch. A new bearing with four retaining plug. Engine and components are HOT. Avoid serious screws will have to be purchased to re
Resumen del contenido incluido en la página 19
Maintenance Maintenance (Continued) Belt Service WARNING ! ! On self-propelled mowers, the engine belt (A, Figure 34) DO NOT attempt any maintenance, adjustments or service transmits power from the engine pulley (B) to the drive disc with engine and blade running. STOP engine and blade. (C). The drive disc powers the poly-v belt, which engages the Disconnect spark plug wire and secure away from spark transmission that powers the rear wheels. Should these belts plug. Engine and components are HOT
Resumen del contenido incluido en la página 20
Maintenance (Continued) WARNING ! ! DO NOT attempt any maintenance, adjustments or service A with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious B burns, allow sufficient time for all components to cool. C Engine Drive Belt Replacement (Stretch Type Belts - Continued) D IMPORTANT: Drain the fuel tank before tipping the mower. DO NOT tip the machine with the carburetor or spark plug E down.
