Resumen del contenido incluido en la página 1
Operators manual
Models:
ZMKW48171 / 968999297
ZMKW52211 / 968999466
ZMKH52251 / 968999532
ZMKH61251 / 968999498
Please read these instructions carefully and make
sure you understand them before using the machine.
MANUAL NO. 114093 REV. IR (09/06/06)
Resumen del contenido incluido en la página 2
©2006 Yazoo/Kees Power Equipment. All right reserved. Beatrice, NE. Printed U.S.A. 2
Resumen del contenido incluido en la página 3
CONTENTS INTRODUCTION .................................. 4 SYMBOLS & DECALS ......................... 6 OPERATING INSTRUCTIONS ............ 19 SAFETY INSTRUCTIONS.................... 7 Roll bar and seat belt .................. 19 General use and saftey rules ...... 7-8 Starting and operation ................. 19 Driving on slopes ........................ 9 Controls ...................................... 19-20 Children safety............................ 10 MAINTENANCE ............................
Resumen del contenido incluido en la página 4
INTRODUCTION Introduction Congratulations Thank you for purchasing a Yazoo/Kees ride-on mower. This machine is built for the greatest efficiency and rapid mowing of large areas. Convenient controls and a hydrostatic transmission regulated by steering levers also contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the life-span of your machine and even increase its resale value. If you
Resumen del contenido incluido en la página 5
INTRODUCTION Good Service Yazoo/Kees products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the follow
Resumen del contenido incluido en la página 6
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxxxxx xxx xxxxx xxxxxxxx. Xxxxxx xxxxx xxxxxxxxx xxxxx xxxxx xxx x xxxxx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this pub
Resumen del contenido incluido en la página 7
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. General Use • Read all instructions in this operator’s manual and on the machine before starting it. Ensure that you understand them and then abide by them. • Learn how to use the machine and its con- trols safely and learn how to stop quickly. Also learn to recognize the safety decals. •
Resumen del contenido incluido en la página 8
SAFETY INSTRUCTIONS • Be careful when rounding fixed objects, so that the blades do not hit them. Never drive over WARNING! foreign objects. Engine exhaust and certain vehicle components contain or emit chemi- • Only use the machine in daylight or in other cals considered to cause cancer, well-lit conditions. Keep the machine a safe birth defects, or other reproductive distance from holes or other irregularities in system damage. The engine ex- the ground. Pay attention to other possible haust c
Resumen del contenido incluido en la página 9
SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if feel unsure, do not mow the slope. Do as follows: • Remove obstacles such as stones, tree branches, etc. • Mow up and down, not side-to-side. • Never drive the rider on terrain that slopes more than 10°. 6003-0
Resumen del contenido incluido en la página 10
SAFETY INSTRUCTIONS Children: • Serious accidents may occur if you fail to be on guard for children in the vicinity of the ma- chine. Children are often attracted to the ma- chine and mowing work. Never assume that children will stay put where you last saw them. • Keep children away from the mowing area and under close supervision by another adult. • Keep an eye out and shut off the machine if children enter the work area. • Before and during a reversing maneuver, look backward and downward for
Resumen del contenido incluido en la página 11
SAFETY INSTRUCTIONS • Allow the engine to cool before refueling. Do not smoke. Do not fill fuel in the vicinity of sparks or open flames. • If leaks arise in the fuel system, the engine must not be started until the problem has been resolved. WARNING! The engine, the exhaust system, • Store the machine and fuel in such a way that and the hydraulic system’s compo- there is no risk of leaking fuel or fuel vapor nents become very warm during leading to damages. operation. • Check the fuel level bef
Resumen del contenido incluido en la página 12
SAFETY INSTRUCTIONS • Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, and odorless, poi- sonous, and lethal gas. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine run- ning. • The machine is tested and approved only with the equipment originally provided or recom- mended by the manufacturer. • The blades are sharp and can cause cu
Resumen del contenido incluido en la página 13
SAFETY INSTRUCTIONS Roll Over Protection System WARNING! This structure’s capability may be impaired by structural damage if overturned, or alter- ation occurs. If any of these conditions take place, the total structure MUST be re- placed. DO NOT use ROPS as a lifting, attaching or anchoring point. DO NOT exceed Max GVW: 2822; ROPS mass 34 lbs./16 kg. Read machine operator’s manual before each use. Securely fasten your seat belt if the unit has a ROPS. Where possible, avoid operating the unit ne
Resumen del contenido incluido en la página 14
PRESENTATION Presentation Lawnmowers and all power equipment, can be potentially dangerous if used improperly. Thank you for buying YAZOO/KEES! Before Safety requires good judgement, careful use in operating your new mower, read, understand accordance with these instructions and com- and follow the safety instructions and other mon sense. directions in this manual. ROPS Motion Control Levers Fuel Cap Blade Engagement Switch Park Brake Lever Key Switch Deck Lift Lever Throttle Hour Meter 14
Resumen del contenido incluido en la página 15
SETUP AND ADJUSTMENTS WARNING! No settings or adjustments are to be made unless: Engine is stopped, key has been removed, park brake is on and bat- 4. Torque all 1/2” hardware to 80 ft./lbs. (110 N•m). tery cable removed from battery. 5. Install and tighten knobs against the side post. Setup Uncrate machine. LATCH PIN TOP LOOP ROPS Assembly (Roll Over Protection System) KNOB ROPS Assembly Components 1 - Top Loop 1/2C X 3 1/4 CAPSCREW 1 - Left Side Post 1/2C CENTERLOCK 1 - Right Side Post NUT 1 -
Resumen del contenido incluido en la página 16
SETUP AND ADJUSTMENTS Control Arms Remove top bolt in control arm and loosen bot- tom bolt, rotate the control levers to the upright position. Align the levers so they are even in the neutral position. Reinstall hardware and tighten. FIG - 1 Control Motion Arm Control Seat Install Lever 1. Remove seat assembly from the crate. 2. Remove the four 5/16C nyloc nuts or 5/16C studed knobs from the bottom of the seat. Retain for use later. FIG - 1 3. Align the seat bottom with the holes in the seat fra
Resumen del contenido incluido en la página 17
SETUP AND ADJUSTMENTS Mower Deck Leveling Position machine on a flat surface. Preferably level concrete. Check the tire pressure in all four tires. Inflation should be 15 psi. Place 2x4’s on edge under the cutting deck from front to rear and lower the deck down onto 2x4’s. Adjust the four upper chain bolts to the center slots in the deck lift arms. NOTE: Make sure the lift blocks under the frame are tightly bolted to the frame. Check the chains for equal tension. If unequal adjust upper chain bo
Resumen del contenido incluido en la página 18
SETUP AND ADJUSTMENTS Motion Control Linkage Adjustment This adjustment must be made with the rear wheels rotating. Raise the rear of the machine Motion Control and block it up so the wheels are free to rotate. Turn Here Lever CAUTION: Keep hands, feet and clothing away To Adjust from rotating tires. Tilt seat forward and remove the seat rod so the seat may rotate forward onto the frame. Pump Place a 2x4 board between the foot plate and the Arm center of the seat to engage the seat safety switch
Resumen del contenido incluido en la página 19
OPERATION By moving the levers an equal amount forward or Operating instructions back the machine will move in a straight line in Roll Bar and Seat Belt that direction. FIG - 5. Operate the unit with the roll bar in the raised and locked position and use seat belt. There is no Movement of either lever forward will cause the rollover protection when the roll bar is down. If it is right or left wheel to rotate in a forward direction. necessary to lower roll bar do not wear the seat belt. Raise the
Resumen del contenido incluido en la página 20
OPERATION Fuel Shut Off Key Switch Fuel shut off valve is located at the right rear of the Key switch is located on the console. Used to start seat. The valve has three positions a right tank, left the machine. NOTE: Do not run the starter for tank and center is the off position. FIG - 7. more than 5 seconds at a time. If the engine will not start, wait about 10 seconds before trying Pump Release again. FIG - 6. The pump release valves are located at the right Hour Meter front corner of the pump
