Resumen del contenido incluido en la página 1
READ THIS MANUAL CAREFULLY!
It contains important safety information.
Keep it for future reference.
super six
Owner’s Manual Supplement
120858.PDF
Please note that the specifications and information in this manual are subject to change for
product improvement. For the latest product information, go to http://www.cannondale.
com/tech/.
Resumen del contenido incluido en la página 2
SAFETY WARNING INFORMATION This supplement may include procedures beyond the scope of general mechanical About This Supplement aptitude. Cannondale Owner’s Manual Supplements Special tools, skills, and knowledge may provide important model specific safety, be required. Improper mechanical work maintenance, and technical information. They increases the risk of an accident. Any are not replacements for your Cannondale bicycle accident has risk of serious injury, Bicycle Owner’s
Resumen del contenido incluido en la página 3
10858.PDF Intended Use WARNING The intended use of your bike or frameset is UNDERSTAND YOUR BIKE AND ITS CONDITION 1 / HIGH PERFORMANCE ROAD. INTENDED USE. CHOOSING THE WRONG BICYCLE FOR YOUR PURPOSE CAN BE HAZARDOUS. USING YOUR BIKE THE WRONG WAY IS DANGEROUS. Industry usage Conditions 1 - 5 are generalized and evolving. Consult your Cannondale Dealer about how you intend to use your bike. Please read your Cannondale Bicycle For riding on Owner’s Manual for more information pa
Resumen del contenido incluido en la página 4
Building Up A Frameset Protect From Extreme Temperatures Before building up a frameset, consult with • Protect your carbon bike from extreme your Cannondale Dealer and the component temperatures when storing or transporting it. manufacturers, and discuss your riding style, ability, weight, and interest in and patience for • Allow your bike to cool off or warm up before maintenance. you ride Make sure the components chosen are • Do not store your bike in places where the compatible wi
Resumen del contenido incluido en la página 5
10858.PDF Inspection & Crash Repainting Or Refinishing You should not paint over the existing finish, Damage of Carbon Frames refinish or repaint your bike. The carbon fiber composites making up the frame are held WARNING together by some extremely strong bonding chemicals. However, these bonds can be AFTER A CRASH OR IMPACT: attacked or weakened by paint stripping or Inspect frame carefully for damage (See refinishing chemicals. PART II, Section D. Inspect For Safety in your Cannonda
Resumen del contenido incluido en la página 6
Figure 2. Serial Number The serial number (1) printed and permanently affixed barcode label. Use this serial number for warranty registration and theft recovery. See your Cannondale Bicycle Owner’s Manual for more information on warranty registration. Bottom Bracket Guide The cable guide (2) is mounted on the bottom bracket. Replacements are available through a Cannondale Dealer. The kit # is KF363/ Vent Keep the small vent hole (3) in the bottom of the bottom bracket shell clear of any
Resumen del contenido incluido en la página 7
48mm 10858.PDF headset KP017/ 6mm 5mm 6.8Nm KP044/ QC777/ 35mm Use only original Cannondale parts. QC778/ Figure 3. 7
Resumen del contenido incluido en la página 8
seat post / binder KF362/BBQ KF115/ Figure 4. Installation WARNING 1. Make sure the seat post, binder, and seat tube are clean. Use a dry towel. TO AVOID SEAT POST OR FRAME DAMAGE: 2. Apply small amount of seat post gel to seat post surface and reinstall the post into the • Follow seatpost manufacturer’s seat tube. instructions • Use a torque wrench to tighten. 4. Tighten the seat binder with a torque wrench. DO NOT EXCEED MAXIMUM • Use only seat post gel to lubricate. SPECIFIED
Resumen del contenido incluido en la página 9
10858.PDF bottom bracket shell KB6180/ QC616/ Figure 5. Crankset Compatability KT011/ The BB shell is compatable with the BB30 Standard. See http://www.bb30standard.com/ For information See SI Cranksets Owner’s Manual Supplement. See http://www.cannondale.com/ tech/. KT013/ Bearing Maintenance Shell bearings (KB6180/) are sealed cartridge type and do not require lubrication. Inspect bearing condition annually (at a minimum) and anytime the crankset assembly is disassembled or servic
Resumen del contenido incluido en la página 10
BB30-to-68mm Standard Adapter The adapter (Cannondale kit KF365/) converts the BB30 bottom bracket cranksets for use with 68mm bottom brackets. Once installed, the adpater can not be removed. The adapter IS NOT a repair part and will only work in undamaged frames in good condition. Improper installation or removal can result in damage and void applicable frame warranty. groove SI BB30 DRIVE SIDE KF365/ Figure 6. CAUTION SERIOUS FRAME DAMAGE Once installed, the SI-to-Standard adapter is a
Resumen del contenido incluido en la página 11
10858.PDF Cannondale Tools KT011/ is a bearing removal tool. KT010/ is a set of bearing installation tools to be used with a standard headset press. KT013/ a two piece tool set required for removing the crankarms SI Hollowgram alloy cranksets. KT011/ KB6180/ KT010/ KT013/ 8mm Figure 7. 11
Resumen del contenido incluido en la página 12
chainstay protection The chainstay plate located on the right chainstay just behind the chainrings, protects the chainstay from damage in the event the chain is dropped from the chainring. Contact your Cannondale Dealer for a replacement if it is becomes missing or damaged. KP045/ Figure 8. The clear chainstay protector provides limited protection against frame or finish damage caused by the chain. Replacement protectors are available through a Cannondale Dealer. Figure 9. 1
Resumen del contenido incluido en la página 13
10858.PDF derailleur hanger Before re- installing (same or new): Clean dropout and inspect carefully for any cracks or damage. Clean surfaces and apply a light film of bike grease to the dropout to minimize any noise or “creaking” that might result from very slight movement between the dropout and hanger during movement of the derailleur. Apply grease and Loctite carefully. Do not contaminate the male or female bolt threads with grease which would cause the Loctite to be ineffective.
Resumen del contenido incluido en la página 14
geometry/specification A B M K F J L C E D G I H ITEM 48 50 52 54 56 58 60 63 Horizontal Top Tube Length (cm) A 51.5 52.5 53.5 54.5 56.0 57.5 59.0 60.0 Measured Size (cm)* B 46 48 50 52 54 56 58 61 Seat Tube Angle C 74.5° 74.5° 74° 73.5° 73.5° 73° 72.5° 72° Head Tube Angle D 72° 72.5° 73° 73° 73° 73.5° 73.5° 73.5° Chainstay Length E 40.5 40.5 40.5 40.5 40.5 40.5 40.8 40.8 Fork Rake F 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 Bottom Bracket Height (cm) G 26.5 26.5 26.5 26.8 26.8 27.0 27.0 27.0 Wheelbase
Resumen del contenido incluido en la página 15
10858.PDF replacement parts ORDER KF363/ BB CABLE GUIDE w/fixing bolt KF055/ INLINE ADJUSTER (QTY 2) KF362/BBQ SEAT BINDER 34.9mm KF115/ SEAT POST GEL KP045/ CHAINSTAY PROTECT-SUPERSIX ORDER HEADSET & FORK PARTS KP043/ FORK SUPER SIX KP044/ HEADSET SUPER SIX QC777/ CROWN RACE QC778/ BRAKE BOLT(35mm) KP017 SI COMPRESSION ASSY ORDER SI BB30 KB6810/ BEARINGS (QTY 2) QC616/ CIRCLIPS (QTY 2) KF096/ REAR DERAILLUER HANGER KP009/ KIT, ADAPTER, SIBB TO 68mm TAP KF365/ SI ADAPTER W/ SET KF366/ SI ADAP
Resumen del contenido incluido en la página 16
owner notes Record maintenance history, service information here. DATE WORK PERFORMED 1
