Resumen del contenido incluido en la página 1
USER MANUAL
02/2008
Before the commissioning of the machine carefully read this User Manual. Always
follow the safety precautions and instructions contained in this Manual! Please
read carefully and take care to understand and comply with all recommendations
and procedures!
- 1 -
Resumen del contenido incluido en la página 2
User manual W3532 Important: The following signs are located on your equipment or in the attached product brochure. Before using the equipment it is important to familiarize yourself with the meaning of each sign. If the self-adhesive label is damaged, illegible or has been removed, ask the dealer to send you a new label and attach it in the same place as the original label (
Resumen del contenido incluido en la página 3
User manual W3532 LAWN TRACTOR W 3532 User and Maintenance Manual Dear Customer, Thank you very much for choosing our product and we are sure that it will fulfil all your expectations. Please read this Manual carefully and proceed exactly according to the instructions. By doing do, you will ensure the optimal use and the long service life of the self-moving cutter. You
Resumen del contenido incluido en la página 4
User manual W3532 6) If the self-moving rotary cutter is not used for cutting grass, it is necessary to disconnect the blades and to lift the cutting mechanism to the highest position. Important! 7) The transport of persons is forbidden. Responsibility 8) Before each use it is necessary to check that the 1) Persons under 18 and any person who do not fulfil the blades ar
Resumen del contenido incluido en la página 5
User manual W3532 Marking Each self-moving rotary cutter is delivered marked with a Assembly of the wheel – Fig 1a name-plate which contains the most important data and the 1. Mount the wheel on the exceeding shaft serial number. The serial number and the year of production 2. Face the hole of the wheel and the shaft with must be stated in the case of each request for tech
Resumen del contenido incluido en la página 6
User manual W3532 10. Insert the bar of the fork lifting cylinder into the hole in the List of parts of the grass storage bin upper cap of the storage bin and secure the fork with the Pos: Name Pieces flexible arrester. Fig. 2b) 1 bin cover 1 2 front frame 1 3 bottom frame 1 4 brace I. 2 5 brace II. 2 6 curtain 1 7 bolt M6x10 2 8 bolt M6x16 6 9 bolt M6x20
Resumen del contenido incluido en la página 7
User manual W3532 19. Switch for lifting front hanger (only for request with front hanger W3532 - Y0418) V = approximately 7 litres NÁDRŽE Cleaner for the hydraulic system – Fig.5 During the replacement of the cleaner it is necessary to discharge the oil from the hydraulic system according to Fig.5a by discharging hole “H”. After discharging the oil, unscrew the cleane
Resumen del contenido incluido en la página 8
User manual W3532 Due to the transport, the self-moving rotary cutter is delivered spaces between the cap and the switch must be cleaned from without motor oil and fuel. Before the activation of the cut grass during the work, if necessary> In the case of filling engine it is necessary to fill up the engine box with oil, and this space with grass it is not possible to run the engi
Resumen del contenido incluido en la página 9
User manual W3532 Disconnection of the travel drive If it is necessary to manually move the self-moving rotary cutter without the engine started, it is necessary to release belt “V” according to Fig.7. When the hydro-drive is disconnected it is forbidden to activate the engine! Therefore, after relocation, immediately tighten the bolt again. Adjustment of the seat The adj
Resumen del contenido incluido en la página 10
User manual W3532 Activation of the driving of the cutting To stop the machine release the travel brake, press the mechanism and the travel of the machine brake and consequently always secure the machine with If the self-moving rotary cutter is on the grass which is to be the parking brake against the unwanted travel of the cut, then it is necessary: machine. rd 1. to s
Resumen del contenido incluido en la página 11
User manual W3532 Slopes Do not use the self-moving rotary cutter for work on slopes with an inclination higher than 10° (17%). In the case of a Important! change of the direction, it is necessary to pay increased In the case of the contact of the blades of the cutting attention. It is necessary to take care of the fact that the wheels machine with stones or other items,
Resumen del contenido incluido en la página 12
User manual W3532 connect a rotary sweeping brush, a rotary snow plough or a plough iron. The suspending equipment in pos. “Z” Fig.11a is Important! mounted on the self-moving rotary cutter by means of 2 pins, For the protection of electrical installation: pos. “C” and 4 clips. The actuator of the lifting “A” is 1. prevent the replacement of the polarity! mounted on poin
Resumen del contenido incluido en la página 13
User manual W3532 2. Setting the timer for maintenance Press and hold button S2 for 4 seconds. The number which is in the correct position will start to flash and the SERVICE icon will be displayed. By pressing and holding button S1 the number will start to change. As soon as you achieve the required number, release button S1 and press button S2 for 1 second, it will switch
Resumen del contenido incluido en la página 14
User manual W3532 empty, wash and attach it again on order to be dried very quickly. If there are any reminders of grass on the walls of the bag, it is necessary to clean it so that the material can breathe. Wash the plastic parts of the body with water and a sponge dipped in washing detergent and pay attention so that the engine and parts of the electrical installation are n
Resumen del contenido incluido en la página 15
User manual W3532 F = according to a table Fig.15b Fig.15 Adjustment of brakes– Fig.15c Adjustment of the belt for the pump drive- 1. Adjustment of air brake valve Fig.15a, 15b The adjustment of the brake valve is based on the Tightening of the belt for the pump drive is performed by the adjustment of the clearance between the brake plates and shift of the complete
Resumen del contenido incluido en la página 16
User manual W3532 Description of Fig. 15c Repair of tyres 1. Air brake valve The self-moving rotary cutter is equipped with tubeless tyres. 2. Pocket of the axis with hexagon The repair of these tyres must be performed by a professional 3. Air brake valve lever service. 4. Joining spring 5. Converter Removing of the transport channel 6. Terminal Before the removing o
Resumen del contenido incluido en la página 17
User manual W3532 hinge arm from the cutting mechanism and release the Method of measurement and TENSION draw of the arm. Draw out the cutting mechanism to TESTER No. 7401-0076 (possible to deliver on an the left or right side. The assembly is performed in order basis) the opposite procedure. Place the measuring preparation on the cover Fig.17 so that the measuring devi
Resumen del contenido incluido en la página 18
User manual W3532 Starting position Measurement value Fig.20 Sharpening of blades Fig.22 An unsharpened blade tears the grass, decreases the filling of the bag and causes yellowing of the lawn which makes the lawn unattractive. The blades must be sharpened on both cutting edges. In the case of dismantling the blades it is necessary to use working gloves; firmly gr
Resumen del contenido incluido en la página 19
User manual W3532 Maintenance plan SELF-MOVING ROTARY CUTTER Working action Before After the After the Monthly After each 50 After each After each After 500 commission first 10 first 50 inspection hours 100 hours season hours or after ing (new hours hours 1 year cutter) - checking the tightening of the belts • • • • •
Resumen del contenido incluido en la página 20
User manual W3532 CUTTING MECHANISM Working action After each After the first Weekly Monthly After each 50 After each 100 After each cutting 5 hours checking inspection hours hours season - checking the sharpening and • • • • • • tightening of blades - checking the tightening of the toothed •
