Resumen del contenido incluido en la página 1
Safety Instructions & Operator’s Manual for
YARD CRUISER
HYDRO DRIVE
SERIES 4
MODELS
YZ15334BVE
YZ15384BVE
MODEL NUMBER EXPLANATION
Y Z 15 33 4 B V E
MODEL DESIGNATION ENGINE OPTIONS
DRIVE SYSTEM TYPE ENGINE TYPE
ENGINE HORSE POWER SERIES DESIGNATION
CUTTING WIDTH
Y – Yard Cruiser 15 – 15.0 HP Engine 33 - 33” Cutting Deck 4 - Series Designation B - Briggs Engine E - Electric Start
Z – Zero Turning Radius 38 - 38” Cutting Deck V – Over Head Valve
Resumen del contenido incluido en la página 2
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS PREPARATION OPERATION (Continued From Previous Column) (Continued From Previous Page) 7. Keep people and pets out of mowing area. 14. Exercise CAUTION when pulling loads. Limit Immediately STOP blades, STOP engine, and loads to those you can safely control and attach STOP machine if anyone enters the area. loads to hitch plate as specified with SNAPPER 8. Check shields, deflectors, switches, blade attachment instructions. 15. DO NOT operate engine in encl
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........................................................................ 2-3 TABLE OF CONTENTS ..................................................................................................... 4 SECTION 1 - FAMILIARIZATION ...................................................................................... 5 SECTION 2 - OPERATING INSTRUCTIONS ................................................................. 6-9 Pre-start Checklist .....
Resumen del contenido incluido en la página 5
Section 1 - FAMILIARIZATION IMPORTANT! The figures and illustrations in this PARKING JOYSTICK FUEL TANK manual are provided for reference only and may BRAKE CONTROL differ from your specific model. Contact your HANDLE Snapper dealer if you have questions. BRAKE RELEASE BUTTON KEY ENGINE SWITCH SPEED CONTROL BLADE SWITCH DECK LIFT HANDLE FRAME COVER OPERATOR’S SEAT DECK DISCHARGE FIGURE
Resumen del contenido incluido en la página 6
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST 2.1.5. Clean exterior surfaces of cutting deck and Make the following checks and perform the service engine of any accumulation of dirt, grass, oil, etc. required before each start-up. Keep engine air intake screen and cooling fins clear 2.1.1. Check tires and add or release air as needed at all times. to bring pressure to 12 P.S.I. in front and 12 P.S.I. in 2.1.6. Add fuel to tank of the YARD CRUISER rear tires. outside where
Resumen del contenido incluido en la página 7
Section 2 - OPERATING INSTRUCTIONS IMPORTANT: This YARD CRUISER is equipped with JOYSTICK IS IN hydrostatic drive. The forward, rearward and steering NEUTRAL POSITION movement of the machine is controlled by a joystick lever. Joystick operations should be performed only RUN from the operator’s position in the seat. A small TURN KEY POSITION movement of the joystick can cause the machine to TO START POSITION move instantly. Move joystick very carefully and slowly. 1. Always mov
Resumen del contenido incluido en la página 8
Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets TURN KEY TO and hazards before and while backing. “OFF” OR STOP POSITION 2.2.3. MOWER BLADE 1. With engine running, move engine speed control to the Rabbit or “fast” position. 2. Pull the blade switch out into the “ON” position to engage the mower blades. See Figure 2.7. DISENGAGE PARKING BRAKE P
Resumen del contenido incluido en la página 9
Section 2 - OPERATING INSTRUCTIONS 2.3.5. CUTTING HEIGHT ADJUSTMENT This machine has seven different cutting height positions. IMPORTANT: When positioning the cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to pull up on the release lever at the same time. Use the release lever when moving deck cutting height to a lower cutting position. 1. Grasp both handles together to disengage latch. 2. Raise or lower ha
Resumen del contenido incluido en la página 10
Section 3 - MAINTENANCE 3.2.2. CHECK MOWER BLADE 3.1 INTRODUCTION 1. Make sure fuel cap is on tight and vent is closed. To retain the quality of the YARD CRUISER, use Turn fuel shut off valve (If equipped) to the “CLOSED” genuine SNAPPER replacement parts only. Contact a position. Start engine and allow it to run until engine local SNAPPER dealer for parts and service assistance. runs out of fuel. See Figure 2.3. For the correct part or information for a particular mower, 2. Apply
Resumen del contenido incluido en la página 11
Section 3 - MAINTENANCE 2. Checking Mower Belt Tension WARNING The idler and spring provide proper belt tension DO NOT attempt any adjustments, maintenance, and require no adjustment. If belt is frayed, slit, service or repairs with the engine running. Stop severed or belt strands exposed, replace belt engine. Stop blade. Engage parking brake. Remove before operating mower. key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are 3.2.4. CHECK TR
Resumen del contenido incluido en la página 12
Section 3 - MAINTENANCE Check mower deck for proper levelness. Adjust as WARNING required. Refer to Section “MOWER DECK DO NOT attempt any adjustments, maintenance, ADJUSTMENT – LEVELNESS”. service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove WARNING key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are Lifting or lowering the machine onto or down from HOT. Avoid serious burns, allow all parts
Resumen del contenido incluido en la página 13
Section 3 - MAINTENANCE WARNING FRONT STRUCTURE ACCESS DO NOT attempt any adjustments, maintenance, HOLE service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove LUBRICATE key. Remove spark plug wire from spark plug and PIVOT secure away from plug. Engine and components are SHAFTS HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. 7. Mow
Resumen del contenido incluido en la página 14
Section 3 - MAINTENANCE WARNING NEW FUEL FILTER DO NOT attempt any adjustments, maintenance, PART NO. 1-4359 service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. 3.4 SERVICE - ANNUALLY Per
Resumen del contenido incluido en la página 15
Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. LOWER VIEW FRONT OF MOWER 4.1 NEUTRAL POSITION ADJU
Resumen del contenido incluido en la página 16
Section 4 - ADJUSTMENTS & REPAIR 4.3.2. MOWER DRIVE BELT REPLACEMENT WARNING Inspect mower drive belt. Replace belt if signs of DO NOT attempt any adjustments, maintenance, excessive wear and/or damage are present. service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove 4.3.3. BELT REMOVAL key. Remove spark plug wire from spark plug and 1. Remove foot rest. Refer to Section “FOOT secure away from plug. Engine and components are REST REMOV
Resumen del contenido incluido en la página 17
Section 4 - ADJUSTMENTS & REPAIR 4.3.5. BLADE BRAKE ADJUSTMENT WARNING The SNAPPER YARD CRUISER is equipped with DO NOT attempt any adjustments, maintenance, an electric clutch/brake that should stop blade service or repairs with the engine running. Stop engine. rotation in 5 seconds or less after being turned off. Stop blade. Engage parking brake. Remove key. If blades continue to rotate longer than 5 seconds, Remove spark plug wire from spark plug and secure adjustment or replacement
Resumen del contenido incluido en la página 18
Section 4 - ADJUSTMENTS & REPAIR WARNING JACKSCREWS DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. JAM NUTS 4.3.6. ADJUSTING MOWER BLADE
Resumen del contenido incluido en la página 19
Section 4 - ADJUSTMENTS & REPAIR 6. Loosen the shoulder bolt that retains the WARNING eccentric. DO NOT attempt any adjustments, maintenance, 7. Turn eccentric “UP” or “DOWN” as required service or repairs with the engine running. Stop until blade tips are within 1/8” of the same engine. Stop blade. Engage parking brake. Remove distance from the floor. See Figure 4.10. key. Remove spark plug wire from spark plug and 8. Tighten shoulder bolt loosened in Step “f”. secure away from p
Resumen del contenido incluido en la página 20
Section 4 - ADJUSTMENTS & REPAIR If the rear blade tip is lower or is more than 1/4” WARNING higher than the front, proceed with adjustment. DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. 1. Remove rear hanger chains. Stop blade. Engage parking brake. Remove key. 2. Turn each hanger pivot the same number of Remove spark plug wire from spark plug and secure rotations on the eye-bolt to raise or lower the away from plug. Engine