Manual de instrucciones de Snapper Walk Behing Mower

Resumen del contenido incluido en la página 1

DEALER SET-UP INSTRUCTIONS for EUROPEAN SNAPPER
21" CAST ALUMINUM REAR DISCHARGE WALK BEHIND MOWERS

This SNAPPER Walk Behind Mower uses a handle engine control bail system to kill the engine for the SAFETY
of the operator. These mowers are designed for quick set-up. The checklist on Page 3 should be filled out by
the dealer as the items are checked off and/or performed and the Consumer/Operator Product Registration card
filled out and sent to the Customer Service department at SNAPPER w

Resumen del contenido incluido en la página 2

IMPORTANT: Only use battery charger provided with the WARNING kit to charge battery. DO NOT over fill battery with electrolyte. Shield the positive terminal with terminal cover located on 1. Remove battery from carton. battery harness. This prevents metal from touching 2. Place battery in a well ventilated area on a level non- the positive terminal which could cause sparks. The concrete surface. electrolyte (acid) produces a highly explosive gas. 3. Remove sealing tape from top of ba

Resumen del contenido incluido en la página 3

DEALER PRE-SALE CHECKLIST for SNAPPER 21" CAST ALUMINUM REAR DISCHARGE WALK BEHIND MOWERS The following must be accomplished prior to sale. Refer to the previous pages in this instruction for detailed set-up instructions. Review this checklist with purchaser. Check (✓ ) items actually performed and signed on checklist. SET-UP CHECKLIST _____ FOAM SHIPPING BLOCK removed from cutting blade. _____ UPPER HANDLE & LOWER HANDLE secured in place and hardware tightened securely. _____ SIDE C