Resumen del contenido incluido en la página 1
OPERATOR’S
MANUAL
Baron / 2400 / RD Series
16HP Hydro Tractors 20HP Hydro Tractors
Mfg. No. Description Mfg. No. Description
1694315 Baron, 16HP Hydro (CE) 1694481 Baron, 20HP Hydro (CE)
1694329 Baron, 16HP Hydro (CE) 1694483 2420H, 20HP Hydro (CE)
1694346 2416H, 16HP Hydro (CE) 1694484 RD2040, 20HP Hydro (CE)
17HP Hydro Tractors 40” Mower Decks
Mfg. No. Description Mfg. No. Description
1694482 Baron, 17HP Hydro (CE) 1694331 40” Mower Deck (CE)
1694485 2417H, 17HP Hydro (CE) 1694338 40” Mower De
Resumen del contenido incluido en la página 2
Table of Contents Safety Rules & Information.................................2 Troubleshooting, Adjustment & Service .........22 Troubleshooting the Tractor..................................22 Identification Numbers........................................5 Troubleshooting the Mower ..................................23 Safety Decals .......................................................6 Seat Adjustment....................................................24 Safety Icons ..........................
Resumen del contenido incluido en la página 3
Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed. 16. Use extra care when loading or unloading the unit GENERAL OPERATION into a trailer or
Resumen del contenido incluido en la página 4
Safety Rules and Information SLOPE OPERATION WARNING Slopes are a major factor related to loss-of-control and tip- Never operate on slopes greater than 17.6 percent over accidents, which can result in severe injury or death. (10°) which is a rise of 3-1/2 feet (106 cm) vertically in Operation on all slopes requires extra caution. If you can- 20 feet (607 cm) horizontally. not back up the slope or if you feel uneasy on it, do not operate on it. When operating on slopes use additional wheel weigh
Resumen del contenido incluido en la página 5
Safety Rules & Information SERVICE AND MAINTENANCE Safe Handling of Gasoline 1. Extinguish all cigarettes, cigars, pipes, and other 12. Grass catcher components are subject to wear, dam- sources of ignition. age, and deterioration, which could expose moving 2. Use only approved gasoline containers. parts or allow objects to be thrown. Frequently check 3. Never remove the gas cap or add fuel with the engine components and replace with manufacturer’s recom- running. Allow the engine to cool befor
Resumen del contenido incluido en la página 6
S SA AM MP PL LE E S SA AM MP PL LE E Identification Numbers Identification Numbers North American Models Tractor ID Tag Mower ID Tag Mfg. No.: 169XXXX Serial No.: XXXXX 2002 dB(A) kW: XXX CE Models PRODUCT REFERENCE DATA Engine RPM XXXX LpA: XXX dB(A) Model Description Name/Number Vibration @ Wheel: XXX m/s² Vibration @ Seat: XXX m/s² Simplicity Mfg. Inc. Port Washington, WI USA 53074-0997 Unit MFG Number Unit SERIAL Number When contacting your authorized dealer for replace- Mower Deck MFG
Resumen del contenido incluido en la página 7
Safety Decals All DANGER, WARNING, CAUTION and instructional SAFETY DECALS messages on your rider and mower should be carefully This unit has been designed and manufactured to pro- read and obeyed. Personal bodily injury can result when vide you with the safety and reliability you would expect these instructions are not followed. The information is for from an industry leader in outdoor power equipment your safety and it is important! The safety decals below manufacturing. are on your rider
Resumen del contenido incluido en la página 8
CE Safety Icons / Directive Compliance SAFETY ICONS SAFETY INTERLOCK Warning: Read Operator’s Manual. SYSTEM TESTS Read and understand the Operator’s Manual before using this machine. This unit is equipped with safety interlock switches and other safety devices. These safety systems are pre- Warning: Remove Key Before sent for your safety: do not attempt to bypass safety Servicing. switches, and never tamper with safety devices. Check their operation regularly. Remove the key and consult techni-
Resumen del contenido incluido en la página 9
Features & Controls Figure 1. Tractor and Mower Controls NOTE: Steering wheel removed for clarity Please take a moment and familiarize yourself with the name, location, and function of these controls so that you will better understand the safety and operating instructions pro- vided in this manual. CONTROL FUNCTIONS The information below briefly describes the func- tion of individual controls. Starting, stopping, dri- ving, and mowing require the combined use of sev- eral controls applied in sp
Resumen del contenido incluido en la página 10
Features & Controls PTO Switch Catcher Removal Lock The PTO (Power Take-Off) switch engages and disen- After depressing the catcher dump lock pedal, pull this gages attachments that use the PTO. To engage the knob forward to release the catcher for removal. PTO, pull UP on the switch. Push DOWN to disengage. Note that the operator must be seated firmly in the trac- Cruise Control (Optional) tor seat for the PTO to function. The cruise control is used to lock the ground speed con- trol in forward
Resumen del contenido incluido en la página 11
Features & Controls Catcher Open/Close Lever The catcher open/close lever opens the catcher so that it may be emptied and closes it for mowing. To empty the catcher, depress the catcher dump lock pedal and pull forward on the handle. To close, push the lever back- ward until the catcher closes and locks. Operating the Tractor GENERAL OPERATING SAFETY STARTING THE ENGINE Be sure to read all information in the Safety and 1. While sitting in the operator’s seat, fully depress the Operation secti
Resumen del contenido incluido en la página 12
Operating the Tractor STOPPING THE TRACTOR & ENGINE PUSHING THE TRACTOR BY HAND 1. Return the ground speed control(s) to neutral. DO NOT TOW TRACTOR 2. Disengage the PTO and wait for all moving parts to Towing the unit will cause transmission stop. damage. Do not use another vehicle to push or pull this unit. Do not actuate the 3. Place the throttle control in the position specified in transmission release valve lever while the the engine owner’s manual provided in the operator's engine is r
Resumen del contenido incluido en la página 13
Operating the Tractor B C B A Figure 3. Engaging the Parking Brake A A. Ground Speed Pedals B. Brake Pedal C. Parking Brake Knob Figure 4. Emptying the Hopper A. Catcher Dump Pedal B. Catcher Lever PARKING BRAKE FUNCTION Applying the Parking Brake - See Figure 3. To lock the parking brake, release the ground speed pedals (A), fully depress the brake pedal (B), pull UP on the parking brake knob (C), and then release brake pedal. Releasing the Parking Brake - See Figure 3. To release the par
Resumen del contenido incluido en la página 14
396 Lbs. (180kg) Operating the Tractor 5. Reinstall the mower deck. B 6. Install the back plate (A, Figure 7) and secure with clevis pins and hair pin clips (B). ATTACHING A TRAILER NOTE: Remove the hopper to attach a trailer. A The maximum horizontal drawbar force allowed is 444 Newton. The maximum vertical drawbar force is 222 Newton. This equates to a 396 lbs (180 kg) trailer on a Figure 7. Deflector Plate 10 degree hill. Secure the trailer with an appropriately A Back Plate sized clevis
Resumen del contenido incluido en la página 15
Operating the Tractor B B C D A A C Figure 10. Lift Arms (Viewed from underneath right side of tractor) A. Mower Lift Arm Figure 9. Raising & Lowering Mower B. Tractor Lift Arm A. Attachment Lift C. Hopper Lever C. Flat Washer B. Cutting Height Control D. Safety Clip WARNING B A Engage parking brake, disengage PTO, stop engine and remove key before attempting to install or remove the mower. MOWER DECK REMOVAL & INSTALLATION Removing the Mower Deck 1. Park tractor on a hard, level surface such
Resumen del contenido incluido en la página 16
Operating the Tractor Installing the Mower Deck 1. Park tractor, shut off PTO and engine, remove the key and apply parking brake. Turn the wheels fully to the left. A 2. Place mower height adjuster (B, Figure 9) in the low- est cutting position. Place the mower lift lever (A) in the lowest position. Slide mower deck under right side of tractor so that mower hitch is aligned with front tractor hitch. 3. See Figure 12. Slide the intermediate tube into the main discharge tube. Connect the interme
Resumen del contenido incluido en la página 17
Regular Maintenance MAINTENANCE SCHEDULE & PROCEDURES The following schedule should be followed for normal care of your tractor and mower. Use the hour meter to deter- mine your operating time. Before Every Every Every Every Spring SAFETY ITEMS Each Use 5 Hours 25 Hours 100 Hours 250 Hours & Fall Check Safety Interlock System ● Check Tractor Brakes ● Check Mower Blade Stopping Time ●● Before Every Every Every Every Spring TRACTOR MAINTENANCE ITEMS Each Use 5 Hours 25 Hours 100 Hours 250 Hours &
Resumen del contenido incluido en la página 18
Regular Maintenance CHECK TIRE PRESSURES Service Interval: Every 25 Hours Tire Pressure should be checked periodically, and main- tained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life. Size PSI bar TRANSMISSION MAINTENANCE 20 x 10.0-8 6-8 ,41-,55 K46 Maintenance 15 x 6.00-6 12-15 ,8-1 The K46 is a sealed unit and d
Resumen del contenido incluido en la página 19
Regular Maintenance Grease: LUBRICATION steering linkage Service Interval: Every 25 Hours foot pedal mower linkage Lubricate the unit at the locations shown in Figures 17- transmission idler assembly pivot 20 as well as the lubrication points listed. Generally, all rear axle shafts (remove wheel hubs) moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and Use grease fittings when present. Automotive lithium pulleys. Wipe surface
Resumen del contenido incluido en la página 20
Regular Maintenance LUBRICATE REAR AXLE SHAFTS A D B Service Interval: Yearly We recommend removing the rear wheel hubs and lubri- cating the axle shafts yearly. This prevents the wheel hubs from seizing onto the axle shaft and makes future service easier. C 1. Turn off the ignition, turn off the PTO, engage the G parking brake, and block the front tires. H 2. Using a jack or chain hoist positioned at the center of the rear frame, carefully jack the unit up until the rear tires are approximatel
