Manual de instrucciones de Snapper 1691852

Resumen del contenido incluido en la página 1

DUAL TAIL WHEELS KIT
INSTALLATION
Mfg. Nos. 1691852
INSTRUCTIONS
KIT PARTS @+j
AR’ = As Required
Figure 1.
A. Plastic Cap
H. Capscrew, 112-13 x l-1/4”
0. Capscrew, 112-n x I-114”
B. Cotter Pin
I. Lockwasher
P. Lockwasher
C. Washer
J. Flat Washer, l-1/4” O.D.
0. Nut
D. Support Bracket
K. Flat Washer, l-1/2” O.D.
R. Crossmember
E. Capscrew, 3/E-16 x 3-112”
L. Flat Washer, l-1/2” O.D.
S. Wheel ( Assembled)
F. Lockwasher
M. Flat Washer, l-6116 O.D.
T. Plate
G. Nut
N. Castle Nut
U. Cotter Pin
.
FORM

Resumen del contenido incluido en la página 2

.: INSTALLATION 7 Place flat washer (L, l-1/2” O.D., 1” I.D.) and, 1. Jack up rear frame and support rider with plate (T) onto spindle and secure with washers, wooden blocks or jackstands. (M, l-5/16” O.D., 3/4” I.D.) and castle nut (N). Use washers (M) as required to fill up space on, 2. If 60 gallon grass catcher is to be installed,’ spindle. Tighten castle nut securely and then remove weights and mounting hardware from back off until crossmember rotates freely. rear frame. Retain hardware and