Resumen del contenido incluido en la página 1
QT17D324SC
User’s Manual
Contact Us:
Q-See Products
8015 E. Crystal Dr
Anaheim, CA 92807
Website:
http://www.q-see.com
Customer Service:
Phone: 877-998-3440 x 538
Email: cs@dpsi-usa.com
Tech Support:
Phone: 877-998-3440 x 539
Email: ts@dpsi-usa.com
Fax:
714-998-3509
Rev 061609
Resumen del contenido incluido en la página 2
QT19D328SC User’s Manual Table of Contents Important Safeguards…………………….………………………………………………………..3 Chapter 1 Product Information……………………………………………………………………4 1.1 Product Description……………………………………………………………..……….4 1.2 Product Features…………………………………………………………………………4 Chapter 2 System Installation…………………………………………………………………..…5 2.1 Installing the Hard Drive……………………………………………………………..…..5 2.2 Rear Panel Layout………………………………………………………………………..5 Chapter 3 System Operation…………………………………
Resumen del contenido incluido en la página 3
QT19D328SC User’s Manual IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECT RIC SHOCK,DO NOT REMOVE THE BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage wi
Resumen del contenido incluido en la página 4
QT19D328SC User’s Manual 10 ．Safety Check: Upon completion of any service or repair to this monitor, ask the service technician to perform safety checks to determine that the monitor is in proper operating condition. 11 ．Retain Instructions: The safety and operating instructions should be retained for future reference. Chapter 1 Product Information 1.1 Product Description This product is a four channel digital monitoring product that is specially designed for the security industry. It ha
Resumen del contenido incluido en la página 5
VIDEO1 2 1 4 3 VIDEO OUT 2 1 USB NET AUDIO IN R L AUDIO OUT R L VGA ALARM QT19D328SC User’s Manual RS-485 interface on the system can be used to control P.T.Z cameras with various communication protocols. VGA output supports 720×480, 1280×720 and 1920×1080 Resolution modes ，better quality picture can be attained by using progressive scanning. Supports file backup to IDE hard drive. Equipped with USB2.0 port which can be used for backup to your PC or laptop directly from the DVR ha
Resumen del contenido incluido en la página 6
QT19D328SC User’s Manual AUDIO IN ：One Channel left/ One Channel right audio input AUDIO OUT ：One Channel left/ one Channel right audio output VGA ：One Channel VGA terminal input 6
Resumen del contenido incluido en la página 7
QT19D328SC User’s Manual Chapter 3 System Operation 3.1 Layout of Front Panel and Remote Control 3.1.1 Front Panel POWER H.D. ALARM NET IR Buttons on front panel and their functions: ① Indicating light area NET ：indicating light for network activity ALARM ：indicating light for alarm activity The alarm light will be on once the alarm is started （no matter what kind of alarm it is for ） H.D. ：Indicating light for Hard Drive activity The light turns on when Hard Drive reads a
Resumen del contenido incluido en la página 8
QT19D328SC User’s Manual ：Right Directional button 【 】button ：for confirmation ，choose the menu items, and press this button to enter into the selected sub-menu ；Pressing this button can display the real time of the system when playing back recordings. Functional Buttons Area 【 】Button ：Main Menu, used for setting each function of the system. 【 】Button ：Play the existing recordings on the hard drive. 【 】Button ：Search button ，used for checking recorded information on the hard drive.
Resumen del contenido incluido en la página 9
QT19D328SC User’s Manual 3.1.2 Remote Control 9
Resumen del contenido incluido en la página 10
QT19D328SC User’s Manual LOGI N/ LOCK POWER ON PLAYBACK 1 1 2 2 3 3 QUAD 4 4 5 5 6 6 PARAM ETER 7 7 8 8 9 9 ANALOG 0 0 + + ZOOM + ZOOM - FOCUS- FOCUS+ EXI T AUTO RECALL PRESET SW I TCH PLAY SLOW CF FW D REV NET SET UP RECORD STOP F1 F1 F2 F3 F4 Buttons on Remote Control and Their Functions: 10
Resumen del contenido incluido en la página 11
QT19D328SC User’s Manual ① Digital Button Area 【0-9 】Button ：Digital buttons ，used for digital input or video switch ，when in quad mode, press 1,2, 3, 4 digit buttons to switch the picture output between the first, second, third and forth video channels. 【+】【- 】Button ：Adjusting various parameters ； Menu Operating Buttons Area ：UP Directional button ； DOWN Directional button ； LEFT Directional button ； RIGHT Directional button ； 【ENTER 】button ：for confirmation ，choose the
Resumen del contenido incluido en la página 12
QT19D328SC User’s Manual displayed frame by frame ，press 【Play 】button to return to normal speed ； 【FWD 】Button ：Play fast forward through the playback video ，at the speed of 2x, 4x times ，press 【Play 】 Button to return to normal speed ； 【REV 】Button ：Play fast backward through the playback video ，at speed of 2x, 4x times ，press 【Play 】Button to return to normal speed ； ⑤ Other function buttons 【POWER/ON 】Button ：for turning the machine on and off （Standby and start）； 【LOG IN/LOCK 】Butt
Resumen del contenido incluido en la página 13
QT19D328SC User’s Manual the system ； 【F1 】Button ：For pick time play on the recorded pictures ； 【F2 】Button ：Press this button to enter into the control menu for PTZ cameras when under the single channel mode. Press left, right, up and down buttons to change the position of the PTZ camera ； Press 【Zoom+ 】, 【Zoom- 】Button ：Adjust the distance of the picture ； Press 【Aperture+ 】, 【Aperture- 】Button ：Adjust the brightness of the picture ； Press 【Focus+ 】, 【Focus- 】Button ：Adjust th
Resumen del contenido incluido en la página 14
QT19D328SC User’s Manual Note: If time recording has been setup on this machine ，and power is connected during this period, then the machine will start and enter into quad mode directly without needing to press 【on/off 】button again to start the machine. If the channel numbers and time are not being displayed, please press 【ENTER 】 button on the remote control unit or panel, and the channel numbers and time will be displayed on the screen. NOTE: If the hard drive has not been installed
Resumen del contenido incluido en la página 15
QT19D328SC User’s Manual want to turn off the system ， the system will change into standby mode from running mode when it is off ；If you want to restart the system, please press the 【on/off 】button on the remote control. 3.3 Using the System When the system is running, press 【setup 】 button to enter into the OSD main menu. Use the “ , , , ” directional buttons on the remote control unit to go to the desired menu ，Press 【ENTER 】 to enter into each menu, the menu options will be expl
Resumen del contenido incluido en la página 16
QT19D328SC User’s Manual b). Machine’s device number : Use can use numbers from “000” to “999”. Machine’s device number has been preset to “000” at the factory. You need to input this number when the system is running. c). Machine’s address: Manually enter the machine’s address here (optional). Machine address could be the address of the place being monitored thru this system. Move the cursor to the “address” line and press enter to enter the address and press enter again when finished.
Resumen del contenido incluido en la página 17
QT19D328SC User’s Manual Blink the video from the camera will still be recorded. 3.3.3 Alarm Set Alarm/Timing Setup Port Alarm Mode Timing Setup 1 On Close Record Delay: 030 2 On Open Output Delay: 010 3 Off Close Buzzer Duration: 000 4 Off Close I/O Alarm Out: On Motion Alarm Out: On a). Terminal Port: 1,2, 3, 4 represent the 4 outer I/O alarm input ports. b). Alarm ：Two choices are On or O
Resumen del contenido incluido en la página 18
QT19D328SC User’s Manual I. Setting the recording time : Press Setup for each channel under “Schedule” to setup the day (Mon-Sun), Time of First Segment, recording mode (Time, Alarm or motion) Time of Second Segment, and type of recording mode. There are 2 segments of recording to accommodate recording overnite. For example, if you start recording at 11:30pm on Monday and stop at 11:00am on Tuesday, the first set will be 11:30pm to 11:59pm and the second set will be 12:00am to 11:00am. I
Resumen del contenido incluido en la página 19
QT19D328SC User’s Manual Troubleshooting: When Pan/Tilt/Zoom does not operate normally, Please check RS-485 connection and Pan/Tilt/Zoom setup. 3.3.6 Network Set Move the cursor to Network Set and press Enter to get into the system’s network setup menu. See picture below: Network Setup IP Address: 192.168.001.200 Subnet Mask: 255.255.255.000 Default Gateway: 192.168.001.001 Bandwidth: Setup Video Port: 08080
Resumen del contenido incluido en la página 20
QT19D328SC User’s Manual Search Menu Playback All Record Log Record Status HDD Status Machine Info Exit a). Playback All Record: Use this option to search for recordings by record type (All, Timing, Alarm) and Date/Time. Date Time: Move cursor to this selection, and directly input the date and time, based on the recording date and time you want to playback; Now press [START] to see the available recording for that duration. If there is no record found, it will say “No Record”
