Manual de instrucciones de Rover 302T3

Resumen del contenido incluido en la página 1

Warranty Conditions

Australia & New Zealand Only


®

Rover Mowers Limited warrant that this machine is free from defects in material and workmanship.

This warranty is limited to making good or replacing any part which appears upon inspection by
the manufacturer or his agent to be defective in material or workmanship.

The engine used to power this machine is warranted by the manufacturer whose warranty
statement has been included with the machine. As the warranty for t

Resumen del contenido incluido en la página 2

Blade removal- refer figure 4 SAFETY INSTRUCTIONS • Remove the spark plug lead from the spark plug • Never mow while barefoot or wearing open sandals or thongs. Wear long trousers and heavy shoes • Set the mower to the high cut position • Know your controls. Read the owner’s manual carefully. Learn how to stop the engine quickly • Lift the rear flap and prop open to give access to the blades. in any emergency • Remove the blade retaining nuts, bolts, blades, washers and discard. • Make

Resumen del contenido incluido en la página 3

Starting the engine INTRODUCTION Refer to the engine manufacturer owner’s manual for detailed starting procedure. Ensure that the engine oil is at the correct level and that the fuel tank is full of fresh unleaded Congratulations on your purchase of a Scott Bonnar domestic rotary lawnmower. petrol. • Move the throttle control lever to the “FAST” position. This manual covers the setting up, operation and maintenance of the Scott Bonnar • Prime the engine in accordance with the engin

Resumen del contenido incluido en la página 4

SETTING UP OPERATION After removing the lawnmower from the carton remove any loose packaging between the Installing the grass catcher mower base and handle bars used for transport. • Raise the rear flap of the mower with one hand and with the other hand grasp the grass catcher by the top handle, and insert into the rear opening. Positioning it against the rear of Handle bar assembly- refer figure 1 the mower. Upper handle • Lift the upper handle bars off the mower bars • Lower the r

Resumen del contenido incluido en la página 5

SETTING UP OPERATION After removing the lawnmower from the carton remove any loose packaging between the Installing the grass catcher mower base and handle bars used for transport. • Raise the rear flap of the mower with one hand and with the other hand grasp the grass catcher by the top handle, and insert into the rear opening. Positioning it against the rear of Handle bar assembly- refer figure 1 the mower. Upper handle • Lift the upper handle bars off the mower bars • Lower the r

Resumen del contenido incluido en la página 6

Starting the engine INTRODUCTION Refer to the engine manufacturer owner’s manual for detailed starting procedure. Ensure that the engine oil is at the correct level and that the fuel tank is full of fresh unleaded Congratulations on your purchase of a Scott Bonnar domestic rotary lawnmower. petrol. • Move the throttle control lever to the “FAST” position. This manual covers the setting up, operation and maintenance of the Scott Bonnar • Prime the engine in accordance with the engin

Resumen del contenido incluido en la página 7

Blade removal- refer figure 4 SAFETY INSTRUCTIONS • Remove the spark plug lead from the spark plug • Never mow while barefoot or wearing open sandals or thongs. Wear long trousers and heavy shoes • Set the mower to the high cut position • Know your controls. Read the owner’s manual carefully. Learn how to stop the engine quickly • Lift the rear flap and prop open to give access to the blades. in any emergency • Remove the blade retaining nuts, bolts, blades, washers and discard. • Make

Resumen del contenido incluido en la página 8

Warranty Conditions Australia & New Zealand Only ® Rover Mowers Limited warrant that this machine is free from defects in material and workmanship. This warranty is limited to making good or replacing any part which appears upon inspection by the manufacturer or his agent to be defective in material or workmanship. The engine used to power this machine is warranted by the manufacturer whose warranty statement has been included with the machine. As the warranty for t