Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Resumen del contenido incluido en la página 4
2 601156_1106
Resumen del contenido incluido en la página 5
MINI FASTRAK 36/42 TRACTORS & DECKS HUSTLER TURF CONSUMER PRODUCT THREE YEAR FULL WARRANTY FOR RESIDENTIAL USE (90 DAYS LIMITED WARRANTY FOR COMMERCIAL USE) WHAT IS COVERED BY THIS WARRANTY tial only) and a 90 day limited warranty, by the engine manufacturer, Hustler Turf Equipment, makes the following warranty to the original pur- to the original owner (commercial only), and, chaser only: e. The battery is covered by a one (1) year limited warranty to the orig- a. Residential use: Hustler Turf
Resumen del contenido incluido en la página 6
Some states do not allow the exclusion or limitation of incidental or conse- OWNER'S RESPONSIBILITY quential damages, so the above limitation or exclusion may not apply to you. You must maintain your Hustler Turf Consumer Product following the main- tenance procedures described in your owner's manual. Such routine mainte- TIME LIMIT nance, whether performed by a dealer or by you, is at your expense. Any action for breach of warranty must be commenced within thirty-seven This machine like any ot
Resumen del contenido incluido en la página 7
FASTRAK 48/54 TRACTORS & DECKS HUSTLER TURF CONSUMER PRODUCT FOUR YEAR FULL WARRANTY FOR RESIDENTIAL USE (ONE YEAR LIMITED WARRANTY FOR COMMERCIAL USE) WHAT IS COVERED BY THIS WARRANTY tial) only and a 90 day limited warranty, by the engine manufacturer, Hustler Turf Equipment, makes the following warranty to the original pur- to the original owner (commercial only), and, chaser only: The Kawaski engine is covered by a two (2) year limited warranty, a. Residential use: Hustler Turf Consumer Prod
Resumen del contenido incluido en la página 8
● Cost of any substitute equipment, facilities, services or downtime OWNER'S RESPONSIBILITY ● The claims of third parties including customers, and injury to prop- You must maintain your Hustler Turf Equipment product following the main- erty tenance procedures described in your owner's manual. Such routine mainte- Some states do not allow the exclusion or limitation of incidental or conse- nance, whether performed by a dealer or by you, is at your expense. quential damages, so the above limitat
Resumen del contenido incluido en la página 9
Resumen del contenido incluido en la página 10
Resumen del contenido incluido en la página 11
SLOPE GUIDE Use this diagram when determining the degree of slope to be mowed. o E (15 ) Slope Guide Lines o D (10 ) o C (5 ) Line A 1. Hold this sheet of paper in front of you. Make sure that Line A is horizontal. 2. Align Line B with a vertical surface such as pole, tree or building. 3. Fold the paper along the slope guide lines (C, D or E). 4. Align the closest slope guide line with the ground slope. This will give you a close estimation of the ground slope to be mowed. 601156_1106 9 Line
Resumen del contenido incluido en la página 12
10 601156_1106
Resumen del contenido incluido en la página 13
OPERATION cleaning. Use a stick to clear a plugged discharge area. Never use Safe Operating Practices your hand! This product is capable of amputating hands and feet and throwing ▲ Do not operate the machine while under the influence of alcohol or objects. Always follow all safety instructions to avoid serious injury or death. drugs. ▲ Exercise caution when loading or unloading the machine onto a trailer Operation or truck. ▲ Never leave a running machine unattended. Always disengage deck ▲
Resumen del contenido incluido en la página 14
▲ Never make sudden starts, stops, turns, or reverse direction, especially used when there is a hazard located at the bottom of the slope. Some when maneuvering on slopes. The steering is designed for sensitive examples are: response. Rapid movement of the steering control levers in either 1. Water; i.e. lake, river direction could result in a reaction of the tractor that can cause serious 2. Cliffs, retaining walls injury. 3. Roads, highways ▲ Never stop suddenly while backing down slopes. T
Resumen del contenido incluido en la página 15
Safety start interlock system Steering control levers in The tractor is equipped with a safety start interlock system consisting of park brake position the park brake switches, seat switch, and deck clutch switch. Check tractor safety start interlock system daily, prior to operation. This system is an important tractor safety feature. It should be repaired immediately if it malfunctions. The machine incorporates a separate seat switch which will stop the tractor engine when the operator is u
Resumen del contenido incluido en la página 16
FasTrak 48/54 - Before moving the unit, pull up on the bypass valve rod Mini FasTrak 36/42 and slide it in the slot to the disengaged position. The steering control levers must be placed in the neutral position, to release the park brakes, so that the tractor can be moved. Both bypass valve Slot rods are located at the front corners of the engine on the engine platform. Fig. 3-6 Do not tow the machine. Move it by hand or use a winch to load on a trailer for transporting. When transporting on
Resumen del contenido incluido en la página 17
FRONT OF TRACTOR FACES THIS DIRECTION N N FORWARD TRAVEL PIVOT TURN FORWARD TRAVEL REVERSE TRAVEL REVERSE TRAVEL RIGHT TURN RIGHT TURN N = NEUTRAL POSITION Direction of arrows indicate direction of tractor movement Figure 3-7 equipment, should read the manual completely and thoroughly, switch in the disengaged position, place steering control levers and should have attempted slow moving maneuvers to become in the park brake position and turn engine off and disconnect familiar with the operation
Resumen del contenido incluido en la página 18
Resumen del contenido incluido en la página 19
EXAMPLE: When the height adjusting stop is placed in the 1-1/2” (3.81 Anti-scalp wheel cm) hole, with the 1/4” (.64 cm) plate facing to the front of the unit, the cutting height is at 1-1/2” (3.81 cm). When the height adjusting stop is placed in the 1-1/2” (3.81 cm) hole, with the 1/4” (.64 cm) plate on the operator’s side of the hole, the cutting height is at 1-3/4” (4.45 cm). The notch located at the rear of the height adjusting bar is to be used when the deck is placed in the transport mode.
Resumen del contenido incluido en la página 20
18 601156_1106
Resumen del contenido incluido en la página 1
