Resumen del contenido incluido en la página 1
Rider 14 Pro
Operator´s manual
Please read these instructions carefully and make sure
you understand them before using the machine.
101 90 55-95
Resumen del contenido incluido en la página 2
Svenska – 31 Sve-5 225/232/235 Bruk 31 97-11-25, 08.46
Resumen del contenido incluido en la página 3
CONTENTS Operator’s Manual for Rider 14 Pro Safety instructions .............................................. 2 Checking the transmission’s air intake ........... 20 Safety rules for USA ........................................ 2 Checking the transmission’s oil level ............. 20 Explanation of symbols ...................................... 4 Checking and adjusting the steering wires .... 21 Safety instructions .............................................. 5 Adjusting the brakes ..........
Resumen del contenido incluido en la página 4
SAFETY INSTRUCTIONS !! 1. Safety rules for USA Safe operation practices for ride-on mowers IMPORTANT! This cutting machine is capable of amputating hands and feet and throwing objects. Failure to ob- serve the following safety instructions could result in serious injury or death. Use slow speed. Choose a low gear so that I. General operation you will not have to stop or shift while on the 1. Read, understand and follow all instructions in slope. the manual and on the machine before start- Follow
Resumen del contenido incluido en la página 5
SAFETY INSTRUCTIONS Travel and transport on public roads IV. Service Check the relevant road traffic regulations before 1. Use extra care in handling gasoline and other driving the machine on a public road. If transporting fuels. They are flammable and vapours are the machine on another vehicle always use ap- explosive. proved securing devices and make sure that the machine is securely held. a) Use only an approved container. Towing b) Never remove gas cap or add fuel with the If your machine ha
Resumen del contenido incluido en la página 6
EXPLANATION OF SYMBOLS These symbols are on the machine and in the instructions. Study them carefully so that you know what they mean. Read the instructions. N R Reverse Neutral Fast Slow Engine off Battery Choke Fuel Oil pressure Cutting height Backwards Forwards Ignition ! Use hearing protection Hydrostatic freewheel Parking brake Brake Warning European standard for Sound level Warning! Rotating blades Warning! Risk that the Never drive across machine safety machine can tip over a slope Ne
Resumen del contenido incluido en la página 7
RIDER 970 RIDER 970 RIDER 970 RIDER 850 RIDER 850 RIDER 850 RIDER 850 RIDER RIDER 850 850 SAFETY INSTRUCTIONS These instructions are for your safety. Read them carefully. This symbol implies that important safety rules are applicable. This is for your safety and the operating reliability of the machine. ! General use: • Make yourself familiar with the controls and how to stop quickly. • Read all the instructions in Operator’s Manual and on the machine before starting it. Make sure you understan
Resumen del contenido incluido en la página 8
SAFETY INSTRUCTIONS • Watch out for traffic when working close to a • Do not cut close to edges, ditches or banks. The road, or crossing one. machine can suddenly tip over if a wheel goes over the edge of a drop or a ditch, or if a bank gives way. • Be careful when rounding a fixed object so that the blades do not hit it. Never drive intentionally • Do not cut wet grass. It is slippery and the tyres can over a foreign object. loose their grip so that the machine slides. • The machine is heavy an
Resumen del contenido incluido en la página 9
RIDER 970 RIDER RIDER 970 970 RIDER 850 RIDER 850 RIDER 850 RIDER 850 RIDER RIDER 850 850 SAFETY INSTRUCTIONS Children Tragic accidents can occur if the driver does not pay attention to children in the vicinity. Children are often attracted to the machine and the work of mowing. Never assume that children stay where you last saw them. • Keep children away from the mowing area and under the close supervision of another adult. • Be on your guard and switch off the machine if children come into th
Resumen del contenido incluido en la página 10
RIDER RIDER RIDER 850 RIDER 850 RIDER 850 RIDER 850 850 850 RIDER 970 RIDER 970 RIDER 970 SAFETY INSTRUCTIONS • Be careful with the maintenance of the battery. Explosive gas is formed in the battery. Never handle the battery when smoking or in the vicinity of naked flames or sparks. Otherwise the battery can explode and cause severe injuries. • Never drive the machine in an enclosed space. The exhaust fumes contain carbon monoxide, an odourless, toxic and fatal gas. • Make sure that bolts and n
Resumen del contenido incluido en la página 11
PRESENTATION Presentation Congratulations on choosing an excellent quality The power transmission from the engine is handled product, Rider ProFlex. These instructions describe by a hydrostatic gearbox, which enables variable the Rider 14 Pro. speed by using the pedals. The Rider 14 Pro is equipped with a 14 horsepower One pedal for driving forward and one for reverse. Vanguard V-Twin engine from Briggs & Stratton. 87 65432 1 910 11 12 13 14 Location of the controls 1. Ignition lock 8. Spee
Resumen del contenido incluido en la página 12
PRESENTATION Throttle control The throttle control regulates the engine speed, and thereby also the rotation speed of the blades. To increase or reduce the engine speed the control is moved forwards or backwards. Choke lever The choke lever is used for cold starting and to give the engine a richer fuel mixture. For cold starting the lever is moved backwards to its end position. Speed limiter 2 1 The speed of the machine is steplessly regulated with two pedals. Pedal (1) is used to drive forwards
Resumen del contenido incluido en la página 13
PRESENTATION Cutting unit Rider 14 Pro can be equipped with numerous attachments. The BioClip unit finely cuts the lawn by cutting the grass several times before returning the clippings to the lawn as fertiliser. The cutting unit with side or rear ejection, that is, the clippings are ejected to the side or behind the unit. Lift lever for cutting unit The lift lever is used to set the cutting unit in trans- port or mowing position. 1. Pull back the lever to the locked position for transport.
Resumen del contenido incluido en la página 14
PRESENTATION Lever for adjustment of the cutting height The cutting height can be adjusted to 9 different positions with the cutting height lever. Cutting unit with side/rear ejector, 40-90 mm. BioClip cutting unit, 45-95 mm. Parking brake The parking brake is applied as follows: 2 1. Push down the brake pedal (1). 2. Push in the lock button on the steering column (2). 3. Release the brake pedal while holding the button pressed. 1 The parking brake lock disengages automatically when the brake pe
Resumen del contenido incluido en la página 15
DRIVING Before starting • Read the safety instructions and information on the location and function of the controls before starting (see pages 5–12). • Conduct daily maintenance before starting (see maintenance schedule on page 17). • Adjust the seat to the required position. Starting the engine 1. Lift up the cutting unit by pulling the lever back- wards to locked position (transport position) and apply the parking brake. 2. Move the throttle control to the middle position. 3. If the engine is
Resumen del contenido incluido en la página 16
DRIVING 5. When the engine starts release the ignition key immediately back to neutral position. IMPORTANT INFORMATION Do not run the starter for more than about 5 seconds at a time. If the engine does not start, wait about 10 seconds before trying again. 6. Push the choke lever gradually forward when the engine has started. 7. Set the required engine speed with the throttle control. WARNING! Never run the engine indoors, in ! enclosed or poorly ventilated areas. The exhaust fumes contain toxic
Resumen del contenido incluido en la página 17
DRIVING 3. Push in the lock button on the lift lever and lower down the cutting unit. 4. Select the required cutting height (1–9) with the cutting height lever. Cutting tips • Localise and mark stones and other fixed objects The total time consumption is not greater since it to avoid collision. is possible to select a higher driving speed without inferior mowing results. • Start with a high cutting height and reduce down until the required mowing results are obtained. • Avoid mowing a wet lawn.
Resumen del contenido incluido en la página 18
DRIVING WARNING! Never drive the machine on ground at ! an angle of more than 15°. Mow slopes upwards and downwards, never across. Avoid sudden changes in direction. MAX 15 Stopping the engine Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard. 1. Lift up the cutting unit by pulling the lever back to the locked position. 2. Move the throttle control to the MIN. position. Turn the ignition key to the STOP. Disengage
Resumen del contenido incluido en la página 19
MAINTENANCE Maintenance schedule The following is a list of the maintenance which should be conducted on the machine. For the items which are not described in these instructions go to an authorised service workshop. Maintenance interval Daily in hours main- Maintenance Page tenance before start 25 50 100 300 Check the engine’s oil level 19 l Check the engine’s cooling air intake 19 l Check the fuel pump’s air filter 19 l Check the transmission’s air intake 20 l Check the transmission’s oil leve
Resumen del contenido incluido en la página 20
MAINTENANCE Removing of the machine hoods Engine hood Release the two rubber straps on the rear edge of the engine hood and lift off the hood. Front hood Release the clip on the front hood and lift off the fender. Right-hand fender Dismantle the foot-plate (1), screws (2 and 3), and 3 lift off the fender. 2 11 1 Left-hand fender Dismantle the screws (1 and 2), and lift off the fender. 18 – English
