Resumen del contenido incluido en la página 8
ASSEMBLY BAGGER SUPPORT ASSEMBLY MOUNTING COVER ASSEMBLY TO 3 4SUPPORT ASSEMBLY 1. Using hardware provided in kit, attach support For ease of assembly, you may wish assistance from mount to unit. another person for mounting the cover assembly to mower. 2. Attach hanger bracket to support mount. Do not fully tighten nuts at this time. 1. Position cover assembly on the ground behind the mower. 3. Secure rear end of support straps to outside of 2. Lift and rotate cover to align the fram
Resumen del contenido incluido en la página 9
ASSEMBLY UPPER CHUTE 6 CAUTION Do not leave grass in bagger 1. Attached flex tube to blower and secure with the containers. Empty containers after each hose clamp. use and before storing. Failure to do so 2. Slide opposite flex hose end into upper chute. may result in spontaneous combustion 3. Push upper chute through the gasketed opening in which could develop into a fire. the cover assembly. 4. Rotate flex tube and upper chute so that the chute opening is downward toward th
Resumen del contenido incluido en la página 10
OPERATION GENERAL RECOMMENDATIONS Always observe safety rules when performing any f. Install a new plastic lawn bag with the edges maintenance. of the bag draped over upper lip of the Container (for replacement bags refer to • Before each use check for loose fasteners. REPLACEMENT P AR TS). • Clean unit thoroughly after each use. g. Repeat for other containers. BLADE CARE h. Reinstall containers making sure right For best results mower blades must be kept sharp. container overlap
Resumen del contenido incluido en la página 11
PARTS 2 1 20 5 5 3 4 20 20 18 19 16 14 15 6 8 7 12 13 11 10 17 9
Resumen del contenido incluido en la página 12
PARTS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION 1.. 539 111139 ....1 .... COVER ASSM, COMPLETE 11.. 532 179746 ....1 .... BAGGER, FRAME INCLUDES ITEMS 2-4 12.. 532 128600 ....1 .... PIN, HINGE 2.. 532 127533 ....1 .... SCREEN, COVER 13.. 532 400226 ....2 .... CONTAINER, SOFT BAG 3.. 532 155042 ....1 .... STRIP, REINFORCEMENT 14.. 539 105408 ....8 .... WASHER #10 FLAT 4.. 532 130895 ....1 .... LATCH HANDLE, COVER 15.. 539 976977 ....4 .... NUT #10-24 HEX NYLOC 5 5.. 539 9
Resumen del contenido incluido en la página 13
PARTS 22 7 11 21 20 16 6 19 1 10 8 4 5 18 2 9 17 12 13 15 3 5 5 14
Resumen del contenido incluido en la página 14
PARTS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION 5 1.. 522 854602 ....1 .... MOUNT, BAGGER 12.. 539 990209 ....4 .... HCS /16-18 x 1 5 2.. 539 100472 ....4 .... RHSNB-18 x 1¼ 13.. 539 990188 ....4 .... WASHER /16 SAE 5 3.. 523 112802 ....2 .... PLATE, REINFORCEMENT 14.. 539 990316 ....6 .... RHSNB /16-18 X ¾ 4.. 522 854702 ....1 .... BRACKET, HANGER 15.. 539 115243 ....1 .... BAFFLE 5 5.. 539 990717 ..12 .... NUT /16-18 HEX NYLOC 16.. 539 116715 ....1 .... BRACKET, DISCHAR
Resumen del contenido incluido en la página 15
P/N 115 150227 IR 03/10/09
Resumen del contenido incluido en la página 1
Operator and Parts Manual
SpeedZTR 36"
Grass Bagger
966 004301
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS SAFETY RULES ............................................... 4 ASSEMBLY ...................................................... 7 UNPACKING INSTRUCTIONS................... 7 PARTS IDENTIFICATION ........................... 7 OPERATION ................................................... 11 GENERAL RECOMMENDATIONS .......... 11 BLADE CARE ........................................... 11 STORAGE ................................................ 11 TIPS TO IMPROVE BAGGING ............
Resumen del contenido incluido en la página 3
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS DANGER ! THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Data indicates that operators, age 60 years and above, are involved in a large percentage of riding Look for this symbol to point out mower-related injuries. These operators should important safety precautions. It evaluate the
Resumen del contenido incluido en la página 4
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS II. SLOPE OPERATION • Never carry children. They may fall of f and be seriously injured or interfere with safe machine Slopes are a major factor related to loss-of-control and operation. tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot • Use extra care when approaching blind corners, back up the slope or if you feel uneasy on it, do not shrubs, trees, or other objec
Resumen del contenido incluido en la página 5
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS • Grass bagger components are subject to wear , damage, and deterioration, which could expose WARNING moving parts or allow objects to be thrown. Battery posts, terminals and related Frequently check components and replace accessories contain lead and lead with manufacturer’s recommended parts, when compounds, chemicals know to the necessary. State of California to cause cancer • Mower blades are sharp and can cut. W rap the an
Resumen del contenido incluido en la página 6
ASSEMBLY CARTON 1 CONTENTS UNPACKING INSTRUCTIONS 1 - Upper Chute 1 - Owner’s Manual • Remove all parts and packing materials from both cartons. 1 - Flex Hose 1 - Hanger Bracket • Check carton contents against list. Be sure all 1 - Bagger Support 1 - Weight Kit parts are there. 2 - High Lift Blades 1 - Hose Clamp 2 - Support Straps 1 - Cast Weight 1 - W eight Box 1 - Baffle 1 - Discharge Adapter 1 - Decal 1 - Discharge Mount Bracket PARTS IDENTIFICATION CARTON 2 CONTENTS 1 - Cover A
Resumen del contenido incluido en la página 7
ASSEMBLY CHANGING BLADES DISCHARGE ADAPTER 1 2 1. Reinstall deck to machine. Refer to Operator ’ s WARNING Manual, if necessary. Blades are sharp. Protect your hands 2. Remove grass deflector from mower deck by with gloves and/or wrap blades with a pulling hairpin cotter and deflector pin. heavy cloth when handling. 3. Position discharge adapter assembly on deck. Run deflector pin through the deflector spring and the mounting brackets on the deflector and mower deck. Slip spring end thr
