Manual de instrucciones de Valcom VPB-260

Resumen del contenido incluido en la página 1

VSP-VPB-260
Issue 5
VPB-260
BATTERY BACK-UP SUPPLY
INTRODUCTION
These instructions contain the specifications and
information necessary to install, operate, and maintain
the VPB-260, Battery Back-up Power Supply.
SPECIFICATIONS
The VPB-260 provides a battery source to permit
system operation in the event of an AC power failure.
Features
• 12 and 24 volt DC outputs
• Outputs fused at 3 amps
Applications
• AC input fuse protected
The VPB-260 is known to be compatible with the
• Power on LED indica

Resumen del contenido incluido en la página 2

Dimensions/Weight INSTALLATION • 9.25" H x 7.5" W x 5.25" D Mounting (23.5cm H x 19.05cm W x 13.3cm D) Using the appropriate hardware, mount the VPB-260 • 19 lbs (8.6 kg) within 6 feet of an AC receptacle. Specifications Connections • Output 24 Vdc and 12 Vdc fused at 3 amps each Unplug the KSU power cord. Consult the installation • Current limited, constant voltage charger manual of the key system for the location of the input • Gel Cell no maintenance type batteries socket for the battery bac

Resumen del contenido incluido en la página 3

VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1. inspection by Valcom, Inc. indicates the validity of the claim, 2. the defect is not the result of damage, misuse, or negligence