Manual de instrucciones de Craftsman 291.37614

Resumen del contenido incluido en la página 1

SEARS
CRAFTSMAN°
owners manual
manual del propietario
Manu_l De L'usager
MODEL NO.
MOD¢:LE NO.
MODELO NO.
291.37614
291.37614
291.3761 4
SEARS CRAFTSMAN
SEARS CRAFTSMAN
SEARS CRAFTSMAN
14"TONDEUSE
14" HAND LAWN MOWER
PODADORA MANUAL
MANUEL
DE 14" (pulgadas)
assembly
assemblde
operating
ensamblaje
operation
repair parts
operaci6n
pi&ces pour rdparation
repuestos
CAUTION:
ATTENTION:
PRECAUCION:
Read RULES for Safe
Lisez attentivement toutes
OPERATION and
les instructions dans ce
Lea cuidadosamente

Resumen del contenido incluido en la página 2

CUTTING HEIGHT ADJUSTMENT These unitscan be adjusted to offer a cutting heightrange from 1/2" to 1-3/4"simply by adjustingthe roller assembly. Keep in mind that the same adjustmentmust be performedon both sidesof the mower. As you followthe instructionsbelow, refer to figure3 for moreinformation. • Toachieve the lowestcuttingposition, loosenand removethe nutson 'bothsides of the roller assembly. • Positionthe bolt throughthe bottom hole of the plasticrollerbracketand the top hole of the mower si

Resumen del contenido incluido en la página 3

PODADORASMANUAL DE 14" 14" TONDEUSE MANUELLE 14" HANDLAWNMOWERS MODELNUMBER291.37614 MODELO NO.291-37614 MODELE NUMERO 291.37614 36 I1 22 22 II I_Ne. PI_ Ne. KW/NL PadNO. F'al Nam Req. am Den_. Nmm O_ Rep,aem Nm Numm Du IqNu Oesedptl_ O_ F',e_ 20. 30519 Cutter_t StudOnekl 13& 13A) 2 _ 2 r:sp_r_o UPb betrade torte ,_Wport_ cocmk_ (m kld_l_ en losno_ 13 y 13A) 2. 30137 R_et - barredeshUlleS B&q 8aadng._sernbly 2 Mor_je _ ,-med_a (comp_is darts lesnos13et 13A) 21. ?_1 1 Cutter6at ._bly _e_age blnes

Resumen del contenido incluido en la página 4

ASSEMBLING HANDLE TO MOWER • Enclosed in carton is a bolt pack and the handle. Take the two upper sectionsof the handle, and usingone 114x 1-3/4" Machine bolt, and the hex nut, fasten the two upper handle sections together as shownin the illustration.Figure 1 • Take the two lever handle sections and using the two 1/4 x 2" Machine bolts withthe hex nuts, fasten the lower handle sectionto the upper. • The holes in the lower handle fit overthe lugs on the side plates. In the bolt pack are 2 retaini

Resumen del contenido incluido en la página 5

MOWER BLADE ADJUSTMENT • The blades have been preadjusted before leavingthe factory. • Misalignment can occur resultingin blades that are too looseor too tight. If this happens, you will notice a rough, uneven cut or a hard pushing mower. • All adjustmentsare made from the rear of the mower(oppositefrom the bar with the logo decal.) Each end of the cut- ting bar can be adjusted separately. • As you followthe instructionsbelow,refer to Figure 1 for more information. • The cutting bar blade (locat

Resumen del contenido incluido en la página 6

ITEMS IN CARTON RULES FOR SAFE OPERATION One complete Hand Mower Chassis. 1. Read and familiarize yourself with the methods of use. Two lower handle sections. 2. Inspect your lawn amd remove foreign objects, etc. Two upper handle sections. 3. Don't operate mower when barefoot or wearing sandals. One plastic bag including hardware for assembly of 4. Use caution - A mower is a precision piece of lawn care equip- handle & handle grips. ment and should be treated as such. One _A"x 1 _A"handle bolt-

Resumen del contenido incluido en la página 7

CUSTOMER RESPONSIBILITIES Always use care when operating your lawn mower and keep clear of moving parts. Avoidstrikingor running into solid objectsor debris in the area to be mowed. Be sure the mower is clean and fallowa regular maintenance schedule in order to provideefficientand safe opera- tion. A well-cared-forlawn mower will last longand operate more efficiently. LIMITED WARRANTY MODEL 291.37614 LAWN MOWER For 90 days from the date of purchase, when this Sears Lawn Mower is maintained and l