Manual de instrucciones de Ariens 916003

Resumen del contenido incluido en la página 1

Date: November 9, 2012 No. L-2194
Service Letter
Ariens Company
655 W. Ryan St.
Brillion, WI 54110
www.ariens.com
Product Family: AMP Rider and Sno-Thro Units
Subject: Battery Replacement Procedures
Dealer Action: Read and Understand New Procedure for Sourcing AMP Batteries
Models: 916002, 916003, 916301, 916302 and 916303 – all serial numbers.
Ariens Company is changing the procedure for sourcing batteries in the field for AMP Rider and AMP
Snow-Thro models.
In the past, there were two p

Resumen del contenido incluido en la página 2

Date: November 9, 2012 No. L-2194 Warranty Replacement Procedure The batteries used on AMP products are covered by warranty for 100% of the first year and pro-rated the second year for consumer use. In the United States and Canada, if an AMP Battery Pack fails in the first year and will be replaced under the 100% warranty, dealers should contact Ariens Technical Service. Ari- ens will supply the appropriate Kits and Batteries through regular parts channels under part number 51600400. Ex

Resumen del contenido incluido en la página 3

Instruction Sheet Kit Number: 51600600 AMP RIDER BATTERY INSTALLATION KIT ASSEMBLY 1. Position batteries in line long edge-to-long edge. WARNING: FAILURE TO FOLLOW Ensure that battery leads all face in the same INSTRUCTIONS could result in personal injury direction. and/or damage to unit. 2. Place one zip tie (item 1) under each battery. Read, understand, and follow all safety practices Ensure that zip ties face in the same direction. in Owner/Operator Manual before beginning. 3. Connect

Resumen del contenido incluido en la página 4

NOTE: Check batteries for possible orientation 9. For multiple battery setup, stagger zip ties (item 1) for a secure fit. See Figure 5. restrictions. NOTE: Once batteries are secure in mower, trim excess 6. Install two battery packs at back of unit in the material on zip ties. vertical position. See Figure 4. 10. Reconnect main wire harness to battery packs. 7. Hold brace carriage bolt upwards prior to installing second battery pack. 8. Install three battery packs in the side position. See

Resumen del contenido incluido en la página 5

Figure 6 04557300 8/12 Page 3 of 3

Resumen del contenido incluido en la página 6

Instruction Sheet Kit Number: 51600500 AMP BATTERY INSTALLATION KIT 2 For use on Models: 916302, 916303, 916003 WARNING: FAILURE TO FOLLOW INSTRUCTIONS could result in personal injury and/or damage to unit. Read, understand, and follow all safety practices in Owner/Operator Manual before beginning. Package Contents Check contents of your kit for the parts listed (Figure 1): 1 Item Part No. Qty. Description 1 04102900 4 Zip Ties Figure 2 2 04502400 1 Battery Harness 4. Place cover (item 3) ov

Resumen del contenido incluido en la página 7

Figure 4 04519800 5/12 Page 2 of 2