Resumen del contenido incluido en la página 1
SUPER HEAVY DUTY FLAIL
SHD62, SHD74, SHD88, SHD96
FLAIL MOWER
Published 03/09 Part No. 803211C
OPERATOR’S MANUAL
This Operator's Manual is an integral part of the safe operation of this machine and must
be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety
and Operation Instructions contained in this manual before operating the equipment. C01-
Cover
®
ALAMO INDUSTRIAL
1502 E. Walnut
Seguin, Texas 78155
830-372-3551
Email: parts@alamo-industrial.com
©200
Resumen del contenido incluido en la página 2
To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!!Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense!
Resumen del contenido incluido en la página 3
In order to reduce accidents and enhance the safe operation of mowers, Alamo Industrial, in cooperation with other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural Mower Safety Practices video and guide book. The video will familiarize and instruct mower-tractor operators in safe practices when using industrial and agricultural mowing equipment. It is important that Every Mower Operator be educated in the oper- ation of their mowing equipment and be able to recogn
Resumen del contenido incluido en la página 4
Alamo Industrial Division is willing to provide one (1) AEM Mower Safety Practices Video Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety Video DVD Format – AEM/FEMA Mower Operator Safety Video Mower Operator’s Manual AEM Mower Operator’s Safety Manual Requester Name Phone: Requester Address: City State Zip Code Mower Model: Serial Number: Date Purchased: Dealer Salesperson: Dealership Name: Dealership Location: Mail to: AEM Video Services 1502 E Walnut street Seguin, TX 78155 Or
Resumen del contenido incluido en la página 5
Table of Contents SAFETY SECTION .............................................................................................................. 1-1 General Safety Instructions and Practices .........................................................................................................1-2 Operator Safety Instructions and Practices ........................................................................................................1-3 Equipment Operation Safety Instructions and Practi
Resumen del contenido incluido en la página 6
Starting the Tractor ..........................................................................................................................................4-23 Brake and Differential Lock Setting ..................................................................................................................4-23 Raising the Mower ...........................................................................................................................................4-24 Driving the Tractor
Resumen del contenido incluido en la página 7
SAFETY SECTION Safety Section 1-1 © 2009 Alamo Group Inc.
Resumen del contenido incluido en la página 8
SAFETY General Safety Instructions and Practices A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions. The first section of this manual includes a list of Safety Messages that, if followed, will help protect the operator and bystanders from injury or death. Read and understand these Safety Messages before
Resumen del contenido incluido en la página 9
SAFETY SAFETY Operator Safety Instructions and Practices The rotating parts of this machine continue to rotate even after the PTO has been turned off. The operator should remain in his seat for 60 seconds after the brake has been set, the PTO disengaged, the tractor turned off, and all evidence of rotation has ceased. (S3PT-10) “Wait a minute...Save a life!” Never crawl under a raised Implement supported solely by the Tractor 3-Point hitch. Release of the control lever or mechanical failure wi
Resumen del contenido incluido en la página 10
SAFETY Always read carefully and comply fully with the manufacturer’s instructions when handling oil, solvents, cleansers, and any other chemical agent. (SG-22) KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement and possible serious injury or death. (SG-24) Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause the Implement to shift or fall crushing themselves or others. (SG-25) NEVE
Resumen del contenido incluido en la página 11
SAFETY SAFETY DO NOT operate this Implement on a Tractor that is not properly maintained. Should a mechanical or Tractor control failure occur while operating, immediately shut down the Tractor and perform repairs before resuming operation. Serious injury and possible death could occur from not maintaining this Implement and Tractor in good operating condition. (SG-36) Equipment Operation Safety Instructions and Practices Never leave the Tractor and Implement unattended while the Implement is in
Resumen del contenido incluido en la página 12
SAFETY Flail Mowers are capable under adverse conditions of throwingobjects for great distances (100 yards or more) and causing seriousinjury or death. Follow safety messages carefully. STOP MOWING IF PASSERSBY ARE WITHIN 100 YARDS UNLESS: -Front and Rear Deflectors, Chain Guards, or Bands are installed and in good, workablecondition; -Mower sections or Wings are running close to and parallel to the ground withoutexposed Blades; -Passerby are outside the existing thrown-object zone;-All areas
Resumen del contenido incluido en la página 13
SAFETY SAFETY Do not mount or dismount the Tractor while the tractor is moving. Mount the Tractor only when the Tractor and all moving parts are completely stopped. (SG-12) Start tractor only when properly seated in the Tractor seat. Starting a tractor in gear can result in injury or death. Read the Tractor operators manual for proper starting instructions. (SG-13) Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and fuel are explosive and their presence could present a
Resumen del contenido incluido en la página 14
SAFETY Do Not operate this equipment in areas where insects such as bees may attack you and/or cause you to lose control of the equipment. If you must enter in such areas, use a tractor with an enclosed Cab and close the windows to prevent insects from entering. If a tractor cab is not available, wear suitable clothing including head, face, and hand protection to shield you from the insects. Attacking insects can cause you to lose control of the tractor, which can result in serious injury or
Resumen del contenido incluido en la página 15
SAFETY SAFETY Avoid mowing in reverse direction when possible. Check to make sure there are no persons behind the mower and use extreme care when mowing in reverse. Mow only at a slow ground speed where you can safely operate and control the tractor and mower. Never mow an area that you have not inspected and removed debris or foreign material. (SGM-08) Do not mow with two machines in the same area except with Cab tractors with the windows closed. (SGM-11) Follow these guidelines to reduce
Resumen del contenido incluido en la página 16
SAFETY DO NOT allow any person under a folded wing unless wing is securely locked up or supported. DO NOT approach the Implement unless the Tractor is turned off and all motion has ceased. Never work under the frame work, or any lifted component unless the implement is securely supported or blocked up. A sudden or inadvertent fall by any of these components could cause serious injury or even death. (STI-03) Connecting or Disconnecting Implement Safety Instructions and Practices DO NOT use
Resumen del contenido incluido en la página 17
SAFETY SAFETY Each Rear Wheel must have a minimum of 1,000 pounds contact with the surface to prevent lateral instability and possible tip-over which could result in serious bodily injury or even death. Widen the wheel tread and add weights if needed. Refer to the mounting instructions or call customer service if you need assistance with counterweight procedure. (SFL-3) On a fully-assembled unit, do not remove the Wing Retaining Strap until hoses are attached to the tractor and the Wing Cylinder
Resumen del contenido incluido en la página 18
SAFETY Transport only at speeds where you can maintain control of the equipment. Serious accidents and injuries can result from operating this equipment at high speeds. Understand the Tractor and Implement and how it handles before transporting on streets and highways. Make sure the Tractor steering and brakes are in good condition and operate properly. Before transporting the Tractor and Implement, determine the proper transport speeds for you and the equipment. Make sure you abide by the foll
Resumen del contenido incluido en la página 19
SAFETY SAFETY Maintenance and Service Safety Instructions and Practices Make sure the PTO shield, integral driveline shields, and input shields are is installed when using PTO-driven equipment. Always replace any shield if it is damaged or missing. (S3PT-8) Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement. Place the Implement on the ground or securely blocked up, disengage the PTO, and turn off the tractor engine. Push and pull the Remote Cylinder l
Resumen del contenido incluido en la página 20
SAFETY Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order. (SG-21) Perform service, repairs and lubrication according to the maintenance section. Ensure the unit is properly lubricated as specified in the lubrication schedule and all
