Resumen del contenido incluido en la página 1
OWNER’S
INSTRUCTIONS
AW0691L
AW0891L
AW1091L
AW1291L
AW1891L
Window-type Room Air Conditioner
(Cool)
EF DB98-09672A(1)
Resumen del contenido incluido en la página 2
Safety Precautions The following safety precautions must be taken when installing and using your air conditioner. 1 The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring, earthing and safety regulations. Depending on national regulations and your specific installation, you may need to install: A circuit breaker For further information on electrical requirements, contact a professional electrician. This device must b
Resumen del contenido incluido en la página 3
Contents PREPARING YOUR AIR CONDITIONER Safety Precautions ......................................................................................... 2 Description of Each Component .................................................................... 4 Remote Control - Buttons and display ............................................................ 5 Getting Started ............................................................................................... 6 Inserting the Remote C
Resumen del contenido incluido en la página 4
Description of Each Component ❄ The design and shape are subject to change, depending on the model. Air outlet Inner air flow blades (right/left orientation) Air outlet Outer air flow blades Ventilation lever (up/down orientation) Air inlet (Outside) Air inlet (Inside) Air filter (Inside) Power plug (The type of power plug may differ, depending on the local power supply.) Timer indicator Temperature/Timer settings Energy Saver indicator Remote control sensor Dry adjustment indicator Fan speed
Resumen del contenido incluido en la página 5
Remote Control - Buttons and display Remote control transmission indicator Mode selection button (Cool, Fan, Dry) Operating mode ( Cool, Dry, Fan) Temperature adjustment Temperature setting buttons Sleep mode Sleep timer setting button Energy Saving mode Fan speed adjustment button Fan speed Energy Saving button On Timer setting Timer setting button Off Timer setting Timer Set/Cancel button Battery discharge indicator On/Off button E-5
Resumen del contenido incluido en la página 6
Getting Started You have just purchased a Samsung window-type room air conditioner which should be installed following your installation manual. Your Owner’s Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s features. The booklet is organized as follows. The following figures are shown on pages 4 and 5: - Description of Each Component - Remote control (buttons & display) They w
Resumen del contenido incluido en la página 7
Inserting the Remote Control Batteries You must insert or replace the remote control batteries when : You purchase the air conditioner The remote control does not work correctly Use two AAA, LR03 1.5V batteries. ➢ Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used. 1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and r
Resumen del contenido incluido en la página 8
U Us si in ng g t th he e U Us si in ng g t th he e C Co on nt tr ro ol l P Pa an ne el l C Co on nt tr ro ol l P Pa an ne el l o on n t th he e U Un ni it t o on n t th he e U Un ni it t This chapter indicates how to operate and program your air conditioner with the control panel on the unit. E-8
Resumen del contenido incluido en la página 9
Cooling Your Room You must select the Cool mode if you wish to lower the temperature in your room. You can also set the Fan speed. Press the (On/Off) button. 1 Result: The air conditioner starts up in the mode selected when the unit was last used. The unit beeps twice. The air conditioner is fitted with a protection mechanism to prevent ☛ the unit from being damaged when it is started immediately after being: Plugged in Stopped It will start up normally after three minutes. 2 If th
Resumen del contenido incluido en la página 10
Ventilating Your Room If the air in your room is stale, you can ventilate the room using the Fan feature. 1 If you wish to discharge stale air, push the ventilation lever on the front of the unit to the right and open position ( ). Result: The air inside the room circulates and stale air is discharged outside. Otherwise, push the ventilation lever to the left and closed position ( ). Result: The air simply circulates inside the room. 2 If necessary, press the (On/Off) button. Result: The
Resumen del contenido incluido en la página 11
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. You can operate the Dry mode only by using the control panel. 1 If necessary, press the (On/Off) button. Result: The air conditioner starts up in the mode selected when the unit was last used. The unit beeps. The air conditioner is fitted with a protection mechanism to ☛ prevent the unit from being damaged when it is started imm
Resumen del contenido incluido en la página 12
U Us si in ng g t th he e U Us si in ng g t th he e W Wi ir re el le es ss s W Wi ir re el le es ss s R Re em mo ot te e R Re em mo ot te e C Co on nt tr ro ol l C Co on nt tr ro ol l This chapter indicates how to operate and program your air conditioner with the wireless remote control. E-12
Resumen del contenido incluido en la página 13
Cooling Your Room You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when cooling 1 If necessary, press the (On/Off) button. Result: The air conditioner starts up in the mode selected when the unit was last used. The unit beeps. The air conditioner is fitted with a protection mechanism to ☛ prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. 2 If
Resumen del contenido incluido en la página 14
Ventilating Your Room If the air in your room is stale, you can ventilate the room using the Fan feature. 1 If you wish to discharge stale air, push the ventilation lever on the front of the unit to the right and open position ( ). Result: The air inside the room circulates and stale air is discharged outside. Otherwise, push the ventilation lever to the left and closed position ( ). Result: The air simply circulates inside the room. 2 If necessary, press the (On/Off) button. Result:
Resumen del contenido incluido en la página 15
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the (On/Off) button. Result: The air conditioner starts up in the mode selected when the unit was last used. The unit beeps. The air conditioner is fitted with a protection mechanism ☛ to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped It will start up
Resumen del contenido incluido en la página 16
Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given time. You can select the On timer only when the air conditioner is off. You Remote Control can select the On timer only when the air conditioner operates in the Cool mode. 1 Check that the air conditioner has been switched off; if necessary, press the (On/Off) button. 2 To set the operating time, press the button one or more times until the required time is displayed. Possible
Resumen del contenido incluido en la página 17
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given time. You can select the Off timer only when the air conditioner is on. You Remote Control can select the Off timer only when the air conditioner operates in the Cool mode. 1 Check that the air conditioner has been switched on; if necessary, press the (On/Off) button. 2 To set the operating time, press the button one or more times until the required time is displayed. Possi
Resumen del contenido incluido en la página 18
Setting the Sleep Timer The Sleep Timer can be used when you are cooling to switch the air conditioner off automatically after a period of 8 hours. If you wish to switch the unit off at a specific time, refer to ➢ Remote Control page 17. 1 Make sure that you have selected the Cool mode. 2 Press the button on the remote control. Result: Each time you press a button, the unit beeps. The indicator on the remote control is displayed. The timer indicator lights up on the control
Resumen del contenido incluido en la página 19
Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, Remote Control select the energy saving mode. 1 To select the energy saving mode, press the button on the remote control one or more times until the Energy Saving indicator lights up. Result: The E-saver indicator lights up on the control panel. The fan and compressor cycle on and off together. The fan will continue to run for a short time after the compressor cycles off. ➢ If you would lik
Resumen del contenido incluido en la página 20
Adjusting the Air Flow Direction Horizontally Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the unit. Adjust the air flow blades to the desired position by pushing them side to side. Adjusting the Air Flow Direction Vertically Again depending on the position of the unit in your room, you can adjust the orientation of the outer air flow blades on the right-hand side of the unit. RECOMMENDATION When... Adjust the blades to face..
