Resumen del contenido incluido en la página 1
OPERATOR’S MANUAL
Portable Power 1150
Model No.
28.71988
Read and follow all Safety
Rules and Operating Instructions
before Every Use of this Product.
SAvE THESE INSTRUCTIONS.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
0099001002-01
Resumen del contenido incluido en la página 2
CONTAINS SEALED, NON-SPILLABLE LEAD-ACID BATTERY. MUST BE DISPOSED OF PROPERLY. WARNING: Possible explosion hazard. Contact with battery acid may cause severe burns and blindness. Keep out of reach of children. DIEHARD ONE-YEAR FULL WARRANTY When operated and maintained according to all supplied instructions, if this DieHard product fails due to a defect in material or workmanship within 1 year from the date of purchase, return it to any DieHard outlet in the United States for free replacem
Resumen del contenido incluido en la página 3
1.4 Do not put fingers or hands into any of the jump starter’s outlets. 1.5 Do not expose the jump starter to rain or snow. 1.6 To reduce the risk of electric shock, turn off and/or unplug the jump starter before attempting any maintenance or cleaning. Simply turning off the controls will not reduce this risk. 1.7 Do not operate the jump starter if it has received a sharp blow, been dropped or otherwise damaged in any way; take it to a qualified service person. (Call customer service at: 1-80
Resumen del contenido incluido en la página 4
2.15 Clean the battery terminals before using the jump starter. During cleaning, keep airborne corrosion from coming into contact with your eyes, nose and mouth. Use baking soda and water to neutralize the battery acid and help eliminate airborne corrosion. Do not touch your eyes, nose or mouth. 2.16 Determine the voltage of the battery by referring to the vehicle owner’s manual and make sure that the output voltage of the jump starter is correct. 2.17 Make sure that the jump starter cable c
Resumen del contenido incluido en la página 5
5. ASSEMBLY INSTRUCTIONS Remove all cord wraps and uncoil the cables prior to using the jump starter. 6. FEATURES 1. jump Start On/Off switch 2. Inverter/Compressor switch 4 3. Digital Display 4. Plastic lens cover 5. (2) Light bulbs 5 6. (2) 12V DC power outlets 7. (2) 110V AC household 1 power outlets. 6 8. USB port 9 9. Power Switch (Light/Display) 10. Air compressor gauge 11. Air compressor hose 2 12. Air compressor accessory bag 13. Air compressor ball inflation 7 adapter 3 8 23 1
Resumen del contenido incluido en la página 6
4. The charger will automatically go into maintain mode and maintain the battery at full charge without damaging it. 5. Charge the jump starter as soon as possible after use. Do not use the jump starter while charging the internal battery. You may also charge the internal battery while driving, using a male-to-male charger cable (part number 94500109 – not included). Insert one end of the accessory cable into the 12V DC power outlet and the other end into the vehicle’s accessory outlet (ligh
Resumen del contenido incluido en la página 7
The DC power outlet is wired directly to the internal battery. Extended operation of a 12V DC device may result in excessive battery drain. Recharge immediately after unplugging the 12V DC device. Appliance Type Estimated Wattage Estimated Usage Time Cell Phone 4 watts 66 hours Fluorescent Light 4 watts 66 hours Radio, Fan 9 watts 29.3 hours Depth Finder 9 watts 29.3 hours Camcorder, VCR 15 watts 17.6 hours Electrical Tool 24 watts 11 hours Electrical Cooler 48 watts 5.5 hours Car Vacuum, Air
Resumen del contenido incluido en la página 8
NOTE: To prevent overheating, the compressor has built-in thermal protection that will turn the compressor off before it overheats. If the compressor shuts off, wait a few minutes and it will automatically restart when the compressor cools. NOTE: The air compressor is rated for 150 PSI. Estimated Time for Inflating Vehicle Tires 13" to 16" 6 to 24 minutes Bike Tire 1 to 3 minutes Sports Balls 30 seconds These times are approximate; use the air compressor gauge to ensure the proper pressure ha
Resumen del contenido incluido en la página 9
3. Keep the jump starter dry. 4. DO NOT allow the jump starter to come into contact with rain or moisture. 5. DO NOT operate the jump starter if you, the jump starter, the device being operated or any other surfaces that may come in contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury or death. 6. Do not place the jump starter on or near heating vents, radiators or other sources of heat. 7. Do not place the jump starter i
Resumen del contenido incluido en la página 10
8.11 Powering a 120v AC Device To operate a 120V AC device: 1. Ensure that the battery clips are securely on the storage holders. 2. Open the protective cover of the AC power outlet on the front panel of the jump starter. 3. Make sure the 120V AC device to be operated is turned OFF. 4. Plug the 120V AC device into the AC power outlet, and turn the Inverter/Compressor Switch to the INVERTER position. 5. Turn the device on. 6. If the device does not operate properly when first connected to the in
Resumen del contenido incluido en la página 11
10.5 IMPORTANT: • CHARGE IMMEDIATELY AFTER PURCHASE • KEEP FULLY CHARGED Charge the jump starter internal battery immediately after purchase, after every use and every 30 days. All batteries are affected by temperature. The ideal storage temperature is at 70° F. The internal battery will gradually self-discharge (lose power) over time, especially in warm environments. Leaving the battery in a discharged state may result in permanent battery damage. To ensure satisfactory performance and avoi
Resumen del contenido incluido en la página 12
12. SPECIFICATIONS Internal Battery Type Maintenance-free AGM Lead-acid Nominal Voltage 12V DC Capacity 22 Ah DC Power Outlet (Max. Continuous Load) 15A (both outlets combined) Built-in Work Light (Non-replaceable) (2) 5W/12V DC (Base type BA9S) jumper Cables 4-gauge AWG, 24 Inches Dimensions (H x W x D) 12 H x 11.5 x 10.5 Inches Product Weight 24.5 lbs. AC Power Specifications Maximum Continuous Power 400 Watts Surge Capacity (Peak Power) 800 Watts No Load Current Draw <0.3 Amps Wave Form Modif
