Resumen del contenido incluido en la página 1
Contents Index
1
USER’S MANUAL
Interactive pen display
Model: DTU-2231, DTU-1631
Interactive pen display
Installation
Using the pen
Customizing the pen
Using the pen display
Customizing the pen display
Using the Radial Menu
Application-specific settings
Troubleshooting
Contents Index
1
Resumen del contenido incluido en la página 2
Interactive pen display Contents Index 2 Interactive pen display User’s Manual Version 2.0, Rev A2510 Copyright © Wacom Co., Ltd., 2010 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications an
Resumen del contenido incluido en la página 3
Interactive pen display Contents Index 3 TABLE OF CONTENTS About the manual 5 Adjusting pitch and phase (VGA only) 31 Navigating the manual 6 Customizing the pen 32 Adjusting tip feel and double-click 32 YOUR INTERACTIVE PEN DISPLAY 7 Adjusting eraser feel 33 Pen display features 8 Advanced tip and eraser pressure settings 34 Front view 8 Customizing pen buttons 35 Rear view 9 Button functions 36 Adjusting display incline 10 Using and customizing the Radial Menu 40 Pen features 11 Working with D
Resumen del contenido incluido en la página 4
Interactive pen display Contents Index 4 Product specifications 67Precautions 76 Model DTU-2231 interactive pen display 67 Physical location 76 General specifications, DTU-2231 67 Environment 76 Display, DTU-2231 68 Usage 77 Tablet, DTU-2231 69 Handling 77 Power adapter, DTU-2231 69 Warranty (Worldwide, Except for Europe, Model DTU-1631 interactive pen display 70 Africa and Middle East) 79 General specifications, DTU-1631 70 Limited Warranty 79 Display, DTU-1631 71 Warranty Service in
Resumen del contenido incluido en la página 5
Interactive pen display Contents Index 5 ABOUT THE MANUAL This document provides quick access to information about your interactive pen display. Click on a navigation button or highlighted word to move through the document. The information is common to Windows and Macintosh computers and Windows screen captures are shown, unless otherwise noted. If you are new to electronic documentation, read navigating the manual. � Go directly to contents or index topics by clicking on them. �SMALL CAPITA
Resumen del contenido incluido en la página 6
Interactive pen display Contents Index 6 NAVIGATING THE MANUAL Use the navigation controls to move through the manual: Go to front page. Contents Go to table of contents. Index Go to index. Go back to previous view. Page back, or page forward. topic Go to topic. Topic continued. ® ® Adobe Reader provides additional tools for using and printing the manual. See the Adobe Reader help for more information. Contents Index 6
Resumen del contenido incluido en la página 7
Interactive pen display Contents Index 7 YOUR INTERACTIVE PEN DISPLAY This manual describes the installation and use of your interactive pen display. The Wacom Tablet control panel enables you to customize your pen and pen display settings. To learn more, see customizing. Pen display features Adjusting display incline Pen features The following information is not included with this product: information about your specific computer hardware or operating system, or information about your applic
Resumen del contenido incluido en la página 8
Interactive pen display Contents Index 8 PEN DISPLAY FEATURES Familiarize yourself with the features and components of your product. FRONT VIEW On Screen Display (OSD) controls Use to adjust the display settings. See adjusting the display. Status LED Lights blue when pen is in active area of the pen display and the pen tip is pressed. LED will not light unless the USB cable is plugged into an active USB port. Power switch Turns unit on or off. Power LED Lights blue when power has been supp
Resumen del contenido incluido en la página 9
Interactive pen display Contents Index 9 REAR VIEW Security slot Pen storage compartment Allows easy attachment Store by inserting one end of the pen into either side of the of a security cable. compartment. Then gently press other end of pen into the compartment. Take care not to damage the pen nib. Remove by pressing in on either end of the pen to eject opposite end from the compartment. Grasp pen and remove. Stand adjustment lever Connection panel � Power connector � DVI/VGA (digital/an
Resumen del contenido incluido en la página 10
Interactive pen display Contents Index 10 ADJUSTING DISPLAY INCLINE � To open the display stand, pull up on the adjustment lever and swing stand out to desired incline. Release lever to lock the stand in place. � To close the stand, pull up on the adjustment lever and gently move stand back into closed position until the latch catches. Release lever to lock the stand in place. Caution Avoid catching your finger in the gap of the movable portion of the stand. Contents Index 10
Resumen del contenido incluido en la página 11
Interactive pen display Contents Index 11 PEN FEATURES Eraser: When brought within proximity of the pen display (5 mm (0.2 inch)), the tablet portion of the display reports the pen location. Pressure information is reported as you press down on the eraser. By default, the eraser function is set to ERASE. Some pens may be configured with a pen tether connection point. DuoSwitch (side switch): Be sure the programmable switch is in a convenient location where you can toggle it with your th
Resumen del contenido incluido en la página 12
Interactive pen display Contents Index 12 INSTALLATION The computer treats the interactive pen display as two separate devices (the display and the pen tablet). Therefore, the installation process is completed in two stages: � First install as a display. � Then install as a pen tablet. Both stages require hardware and software installations and adjustments. Carefully follow ALL instructions. Important: You MUST install the Wacom driver software for correct pen-on-screen functionality. Syste
Resumen del contenido incluido en la página 13
Interactive pen display Contents Index 13 STEP 1: DISPLAY INSTALLATION In this step, the interactive pen display is installed as a monitor on your system. Important: Do not connect the USB data cable until instructed to do so. Never connect or disconnect the video or power cables while your computer or pen display are powered on. This can damage the display or video card. 1. Turn off your computer. 2. If your computer has only one video connector, unplug your previous monitor or add a second
Resumen del contenido incluido en la página 14
Interactive pen display Contents Index 14 LCD monitor cabling diagram Use the DVI-I OUT port to connect a second device, such as a projector or monitor, that mirrors the pen display. DVI or VGA – A – Analog (VGA) Fully install the hardware and software video card DVI/VGA switch Digital (DVI) before connecting another device. Or DVI-I IN Computer – B – DVI-D to DVI-I cable or VGA to DVI-I cable – C – DC input To AC outlet – D – Power adapter Caution Make sure your video card has a DVI or VGA
Resumen del contenido incluido en la página 15
Interactive pen display Contents Index 15 7. Next, turn on your computer. For Windows: The interactive pen display will automatically install as a default monitor. (Some models may not include a color profile.) To identify the unit as a pen display and install the color calibration profile: A) Open the system CONTROL PANEL folder. � For Windows 7 and Vista, under APPEARANCE AND PERSONALIZATION select ADJUST SCREEN RESOLUTION. � For Windows XP, open the DISPLAY PROPERTIES control panel and
Resumen del contenido incluido en la página 16
Interactive pen display Contents Index 16 8. As necessary, configure the display control panel settings for the proper size and color resolution. See the product specifications for details about the maximum (native) resolution and other resolution sizes that can be used with your pen display. The display size and color resolution may be constrained by the capabilities of your video card. Windows: If you are using the pen display as a secondary display, you may first need to enable the unit
Resumen del contenido incluido en la página 17
Interactive pen display Contents Index 17 STEP 2: PEN TABLET INSTALLATION In this step, the interactive pen display is installed as a pen tablet. USB cable installation Software installation USB CABLE INSTALLATION Plug the square end of the USB cable into the USB port of the interactive pen display. Plug the other end into an available USB port on your computer or USB hub attached to your computer. To USB port USB port Computer Next, move on to the software installation. Contents Index 17
Resumen del contenido incluido en la página 18
Interactive pen display Contents Index 18 SOFTWARE INSTALLATION Important: You MUST install the Wacom driver software for correct pen-on-screen functionality. Save your work and close all open applications. Temporarily disable any virus protection programs. � Insert the Installation CD into your computer’s CD-ROM drive. If the software installer menu does not automatically display, double-click on the INSTALL icon located on the CD. (You can also download and install the latest software driv
Resumen del contenido incluido en la página 19
Interactive pen display Contents Index 19 WORKING WITH THE INTERACTIVE PEN DISPLAY As you work with the pen display you can rest your hand lightly on the display screen, just as if it were a sheet of paper. Because the pen display surface will be a little higher than your desk, consider adjusting the height of your desk or chair to assure comfortable use of the device. Ergonomics Using the pen Working with multiple monitors Adjusting the display ERGONOMICS To minimize fatigue, comfortably or
Resumen del contenido incluido en la página 20
Interactive pen display Contents Index 20 USING THE PEN The pen is cordless, battery-free, and senses the amount of pressure you apply to the tip. Holding the pen Positioning Clicking Dragging Using the side switch Working with pressure sensitivity Erasing HOLDING THE PEN Hold the pen like you would a normal pen or pencil. As you work with the interactive pen display you can rest your hand lightly on the display screen. You can tilt the pen in any way that feels most comfortable. For inform
