Resumen del contenido incluido en la página 1
ORDER NO. CPD0711216CE
Notebook Computer
Model No. CF-30FTSAZAM
This is the Service Manual for
the following areas.
M …for U.S.A. and Canada
© 2007 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
Resumen del contenido incluido en la página 2
WARNING For U.K. This apparatus must be earthed for your safety. To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connec- tion to earth. Wrongly wired extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily does not imply that the power poi
Resumen del contenido incluido en la página 3
SAFETY PRECAUTIONS 1. Before servicing, unplug the power cord to prevent an electric shock. 2. When replacing parts, use only manufacture's recommended components for safety. 3. Check the condition of the power cord. Replace if wear or damage is evident. 4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc. Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to
Resumen del contenido incluido en la página 4
Precautions (Battery Pack) Do Not Use with Any Other Product Do not touch the terminals on the battery pack. The The battery pack is rechargeable and was intended for battery pack may no longer function properly if the the specified product. If it is used with a product other contacts are dirty or damaged. than the one for which it was designed, electrolyte leak- Do not expose the battery pack to water, or allow it to age, generation of heat, ignition or rupture may result. become wet. If
Resumen del contenido incluido en la página 5
CONTENTS 1. Specifications 1-1 2. Names and Functions of Parts 2-1 3. Block Diagram 3-1 4. Diagnosis Procedure 4-1 5. Power-On Self Test (Boot Check) 5-1 6. List of Error Codes 6-1 7. Self Diagnosis Test 7-1 8. Wiring Connection Diagram 8-1 9. Disassembly/Reassembly 9-1 10. Exploded View 10-1 11. Replacement Parts List 11-1
Resumen del contenido incluido en la página 6
1. Specifications This page provides the specifi cations for the basic model CF-30FTSAZAM/CF-30F3SAZAM. The model number is different according to the unit confi guration. To check the model number: Check the bottom of the computer or the box the computer came in at the time of purchase. To check CPU speed, memory size and the hard disk drive (HDD) size: Run the Setup Utility ( Reference Manual “Setup Utility”) and select [Information] menu. [CPU Speed]: CPU speed, [System Memory]: Memory siz
Resumen del contenido incluido en la página 7
Main Specifi cations ® ® Operating System Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies (NTFS File System) ® ® Utility Programs DMI Viewer, Microsoft Windows Media Player 10, Adobe Reader, PC Information Viewer, ® ® SD Utility, Icon Enlarger, Loupe Utility, Intel Matrix Storage Manager, Intel PROSet/Wireless *7 ® *8 Software , Bluetooth™ Stack for Windows by TOSHIBA , Wireless Switch Utility, Hotkey Set- tings, Battery Recalibration Utility, Panasonic H
Resumen del contenido incluido en la página 8
2. Names and Functions of Parts F G H I J K K A L EX K PC M D N E O A: Bluetooth Antenna : Battery status Reference Manual “Battery Power” Reference Manual “Bluetooth” : Power status (Off: Power off/Hibernation, Green: Power on, B: ExpressCard Slot Blinking green: Standby) Reference Manual “PC Card / ExpressCard” *1 : Wireless ready C: PC Card Slot This indicator lights when Wireless LAN, Blue- Reference Manual “PC Card / ExpressCard” tooth, and/or Wireless
Resumen del contenido incluido en la página 9
Right side A B C D E F G H I 1394 Rear side Bottom Q J H K L M N O P R A: Hard Disk Drive M: External Display Port Reference Manual “Hard Disk Drive” Reference Manual “External Display” B: SD Memory Card Slot N: Headphone Jack You can connect headphones or amplifi ed speakers. Reference Manual “SD Memory Card” When they are connected, audio from the internal C: SD Memory Card Indicator speakers is not heard. (Blinking: During access) O: Microphone Jack Reference Manual “SD Memory Card” A con
Resumen del contenido incluido en la página 10
3 Block Diagram 3-1 Merom DC T TM M I Intel Co ntel Core re 2 4MB L2 Cache D Duo pro uo proce essor ssor 1.6GHz, FSB 800MHz 1.05V 5.3Gbytes/sec AMP Speaker LCD LCD SO-DIMM Memor 64bit BUS 1.8V 533MHz Internal DRAM DDR2 SDRA 1 13.3 3.3” XGA XGA RJ11 4.2Gbytes/sec Graphics Interface 1 1000nit 000nit 2GB Sound Headphone HDA Data Modem GM965 CRT DMI SO-DIMM Memory AD1884 Ext. MIC INTEL 64b
Resumen del contenido incluido en la página 11
4 Diagnosis Procedure 4.1. Basic Procedures 4-1
Resumen del contenido incluido en la página 12
4.2. Troubleshooting Please take note of the following two points with regard to troubleshooting: 1. Know-how of diagnosis upon occurrence of heavy troubles, e.g. Set cannot be turned ON, Set fails to start, No display on screen , etc. 2. Explanation of each trouble, mainly symptom of trouble in operation. Flow Chart Pay attention to the following points when in pursuit of the cause of a troubleshooting. 1. Peripheral apparatus connected with the set should all be removed before opera
Resumen del contenido incluido en la página 13
5 Power-On Self Test (Boot Check) Outline of POST The set has a boot check function called POST (Power-On Self Test) in it. The condition of the main body is diagnosed by checking beep sound or error code. Start .............Test begins automatically when power switch is set to ON. Normal finish .....After memory checking, a beep sound is issued once and the set is placed into automatic stop. Note: If no error occurs, nothing is displayed. (No display of OK, etc.) Error Diagnosis by Checkin
Resumen del contenido incluido en la página 14
6 List of Error Codes The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the messages and remedies for reported problems. If your system displays one of except the messages marked below wi
Resumen del contenido incluido en la página 15
02D0 System cache error - Cache disabled Contact Panasonic Technical Support. 02F0: CPU ID: CPU socket number for Multi-Processor error. 02F4: EISA CMOS not writable ServerBIOS2 test error: Cannot write to EISA CMOS. 02F5: DMA Test Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Software NMI Failed ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt). 02F7: Fail - Safe Timer NMI Failed ServerBIOS2 test error: Fail
Resumen del contenido incluido en la página 16
7 Self Diagnosis Test As for the self-diagnosis test(PC-Diagnostic utility) to use this model, a standard test and the enhancing test by the module of the main body building in are possible. NotesTo skip BIOS password Use + key to skip BIOS password or authentication of fingerprint. This key is only for entering DIAG mode. Not available to boot the computer. If customer set "HDD Lock", the DIAG program cannot perform HDD test. *This key is for serv
Resumen del contenido incluido en la página 17
2. Operation of PC-Diagnostic Utility -Only the device which can be inspected on the entire screen is displayed. -The item does not appear when the device of wireless LAN etc. is not physically connected. -The movement of the item must use an arrow key or a flat pad. -As for the device under the diagnosis, blue and yellow are alternately displayed at the left of the icon. - The diagnosis result of the device greens at the left of the icon when it is normal, and becomes red when abnormal. -When t
Resumen del contenido incluido en la página 18
2-1. Selection of tested device -To test only a specific device, "Test" and "Do not test" of each device can be selected. -The device which can select the enhancing test changes in order of "The standard is tested" and "Do not test" whenever the device icon is clicked. Start the standard test Do not test Please begin testing clicking if the selection of the tested device ends.
Resumen del contenido incluido en la página 19
3. Test Item and Division of trouble Enhan- Place with possibili- Test item Stanard Content of standard test Content of enhancing test ty of breakdown cing CPU is shifted to protected mode, and "Violation of the paging", "Operation of CPU / CPU / the violation of a privileged instruction", Main board SYSTEM and DMA, INT, TIMER, and the RTC operation are confirmed. All memory space is tested in a special Memory / RAM memory access pattern based on Mainboard "R.S.T . technology". The record area
Resumen del contenido incluido en la página 20
The place with possibility of Test Item Standard Enhanced Content of Standard Test Content of Extend Test breakdown It is confirmed not to find Perform Touch Screen abnormality in the USB functionality practically. Main board/ Touch Screen connection of Touch Screen. Operator has to judge Touch Screen This test cannot find PASS/FAIL with test result. abnormality of Touch Screen. It is confirmed not to find abnormality in the connection Bluetooth Bluetooth cable of Main board and Bluetooth module
