Resumen del contenido incluido en la página 1
Mobile mini note PC
MP-XP7210GB/MP-XP3210GB
VICTOR COMPANY OF JAPAN, LIMITED
INSTRUCTIONS
Thank you for purchasing the JVC MP-XP7210GB/MP-XP3210GB
Mobile mini note PC.
Before Use
The built-in V.90 modem is installed for use on official analog
Read and follow the instructions of this manual to use your Mobile
telephone lines in Germany, UK, Austria, France and Switzerland.
mini note PC correctly.
Always read the "Safety Precautions" and "Operation Notes." Keep
this manual and the warrant
Resumen del contenido incluido en la página 2
2 EN Dear Customer, Thank you for purchasing this Mobile mini note PC. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. The modem incorporated in this product was tested according the standard TBR21. The correct function on a public analogue telephone line is confirmed with the listed cautions. Should you have any problem on a specific telephone network, we kindly ask you to inform your JVC Service Centre the natu
Resumen del contenido incluido en la página 3
EN3 CAUTIONS: ● This Mobile mini note PC is designed to be used with the JVC BN-LS11E/LL21E battery packs and, to recharge them or to supply power to the Mobile mini note PC from an AC outlet, use the provided AC Adapter and Power Cord. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.) When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (1
Resumen del contenido incluido en la página 4
4 EN CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. IMPORTANT SAFETY INSTRUCTIONS: 1. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 2. Do not use the telephone to report a gas leak in the vicinity of the leak. 3. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes
Resumen del contenido incluido en la página 5
EN5 Lithium-ion is vulnerable in colder temperatures. About Batteries DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion. WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire. Caution! Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. The Benefits Of Lithium-Ion Batte
Resumen del contenido incluido en la página 6
6 EN CHECKING INVENTORY Before using your Mobile mini note PC (hereinafter Mobile PC), make sure that all of the following system components have been included in the container. If you have found any shortage or problem, contact the sales shop. •MP-ACX1 AC power adapter •Mobile mini note PC •Modem cable •AC power cord (2-meters long) • Telephone adapter •External display cable •Application CD-ROM •BN-LS11E standard lithium ion battery pack •Two stick caps •Instruction manual (this book) •Protect
Resumen del contenido incluido en la página 7
EN7 JVC Software License Agreement Important: Thank you for purchasing JVC Mobile mini note PC ("Product"). Please carefully read this End-User License Agreement (“Agreement”) before installing or using JVC original software accompanied with or pre-installed into the Product (“Software”). The right to use the Software is granted by Victor Company of Japan, Limited (“JVC”) to You only on the condition that You agree to the following Agreement. If You do not agree to the terms of the Agreement,
Resumen del contenido incluido en la página 8
8 EN 5. Limited Warranty (1) THE SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. SHOULD THERE BE ANY PROBLEM ARISING FROM OR CAUSED BY THE SOFTWARE, YOU SHOULD SETTLE ALL SUCH PROBLEM AT YOUR OWN COSTS AND RESPONSIBILITIES. (2) THIS SECTION PROVIDES JVC’S EXCLUSIVE WARRANTY REGARDING THE SOFTWARE. JVC DOES NOT MAKE ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. 6. Limitation of Liability JVC WILL HAVE NO LIABILITY WITH RESPECT TO ITS OBLIGATIONS UNDER THIS AGREEMENT OR OTHERWISE FOR CONSE
Resumen del contenido incluido en la página 9
EN9 END-USER LICENSE AGREEMENT Important: Please carefully read this End-User License Agreement ("Agreement") before installing or using the G.726 Decoder ("Software") on your PC. The right to use the Software is granted by Victor Company of Japan, Limited ("JVC") to You only on the condition that You agree to the following Agreement. If You do not agree to the terms of the Agreement, you may not install the Software any more. HOWEVER, INSTALLING OR USING THE SOFTWARE INDICATES YOUR ACCEPTANC
Resumen del contenido incluido en la página 10
10 EN SOFTWARE, YOU SHOULD SETTLE ALL SUCH PROBLEMS AT YOUR OWN COST AND RESPONSIBILITY. 6. Limitation of Liability JVC WILL HAVE NO LIABILITY WITH RESPECT TO ITS OBLIGATIONS UNDER THIS AGREEMENT OR OTHERWISE FOR CONSEQUENTIAL, EXEMPLARY, INCIDENTAL OR PUNITIVE DAMAGES EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOU WILL INDEMNIFY AND HOLD HARMLESS JVC FROM ANY LOSS, LIABILITY OR COSTS ARISING OUT OF OR IN ANY WAY CONNECTED TO CLAIMS FROM ANY OTHER PERSONS RELATING TO THE US
Resumen del contenido incluido en la página 11
EN11 Table of contents SAFETY PRECAUTIONS ....................................... 2 Using the Numeric Keypad ........................... 50 SOME DO’S AND DON‘TS ON THE SAFE Increasing the (Optional) Memory USE OF EQUIPMENT .......................................... 3 Capacity ......................................................... 51 CAUTIONS .......................................................... 5 Adding or Removing a Memory Board .......... 52 CHECKING INVENTORY .....................
Resumen del contenido incluido en la página 12
12 EN PARTS AND COMPONENT NAMES Your Mobile PC has the following parts and components. Stick Left button (On/Off) Key BN-LS11E standard lithium ion battery pack Scroll button DC Input connector USB Right button Modem jack connectors Headphone LAN connector output Microphone input External monitor output Buckle Display panel Keyboard Built-in lithium ion battery pack Speakers i-Link connector (MP-XP7210 only) Ventilation slots RESET button SD card slot PC card eject button PC card slot XP72
Resumen del contenido incluido en la página 13
EN13 SETTING UP XP7210/3210-2-20 13 02.8.6, 8:22 PM
Resumen del contenido incluido en la página 14
SETTING UP 14 EN SETTING UP When you first use your Mobile PC, always plug the AC power cord into the DC Input connector. The built-in lithium-ion battery pack will be recharged during your PC setup. To avoid data loss due to power failure or any others cause, check the points for battery recharging in Page 16. 1. Unplug the jumper pin before recharging the battery pack Always unplug the battery terminal jumper pin from the PC rear panel when recharging the battery pack by plugging the AC powe
Resumen del contenido incluido en la página 15
EN15 3. Open the display panel Buckle 1 Slightly pull up the buckle of the Note 2 Carefully open the display panel to the desired PC, and the display panel will be angle. You can open the display panel to 180 unlocked. degrees. 4. Recharge the built-in battery pack by plugging the AC cord into DC Input connector When recharging the built-in battery pack: 1 Plug the AC power cord into the AC adapter. 2 Plug the DC cord of the adapter into the DC Input connector of the Mobile PC. 3 Plug the AC
Resumen del contenido incluido en la página 16
SETTING UP 16 EN 5. Make sure that the battery pack is fully charged To avoid an interruption of your operation due to power failure, check the battery voltage when you start to use your PC in the field. See "Checking the battery level" (see Page 61) to check the battery voltage level. ¡ Make sure that the battery pack is fully recharged When you are using the AC adapter and when the battery indicator ( ) lights in green, the battery pack is fully (100%) recharged. When it lights in orange, t
Resumen del contenido incluido en la página 17
EN17 TURN-ON Turning (On/Off) Key On Press the (On/Off) key. The PC will turn on and the Windows logo will appear. 1 A SD (On/Off) Key Cautions ¡ Turn Off the PC (On/Off) key in areas such as hospitals and aircraft where use of the PC is prohibited. Otherwise, 1 2 your PC may influence the electronics and medical equipment and may cause a serious problem. At present, each airline prohibits the use of electronic devices in an airplane according to the flight condition (taking off and l
Resumen del contenido incluido en la página 18
TURN-ON 18 EN Initial Setup of Microsoft Windows When using your PC for first time, you must prepare to use Microsoft Windows. Once you have finished the initial Windows setup, you can use the software and various PC functions. Use the following procedure to initially set up Microsoft Windows. For pointing device and keyboard operations, see Pages 48 to 50. 1. When the "Welcome to Microsoft Windows" screen appears, click [Next] at the right lower corner of the screen. The "The End User License
Resumen del contenido incluido en la página 19
EN19 6. Enter the user name and click [Next]. The "Thank you!" screen will appear. Tips The name you have entered is shown on the "welcome" screen that appears when you turn the PC power switch on after initial Windows setup. To start up Microsoft Windows, click the user name shown on the screen. 7. Click [Finish]. The initial Windows setup has completed. Cautions • Your PC operation is not guaranteed if you have installed an operating system (OS) other than the system OS attached to your PC.
Resumen del contenido incluido en la página 20
TURN-ON 20 EN Turn-Off Cautions • Always use this procedure to turn off the PC. Otherwise, your PC may fail. 1. Click [start]. The "start" menu will appear. 2. Click [Turn Off computer]. The "Turn off computer" screen will appear. 3. Click [Turn Off]. The PC will be turned off automatically, and (Stand By) lamp will go out. Before closing the LCD panel, make sure that (Stand By) lamp has turned off. XP7210/3210-2-20 20 02.8.6, 8:23 PM
